EPG download with motorised dish

[dwarf]

Here are 2 of the latest log's.

I rebooted the box then pressed the blue button and started crossepg downloader, I left it for about 10 minutes trying to download the epg from 28.2 then killed it using init 4 then init 3 then downloaded the logs.

Enigma2-15-08-2015_14-03-53.logcrossepg.log

[Huevos]

You are posting the wrong log.

If you post the most recent log that is the one after the restart. You need to post the log that contains the EPG pull.

[Joe_90]

The crossepg.log shows 13E being downloaded, then it seems to stall on 28E as you indicated in the first post. The debug log doesn't show anything of interest. As abu says, maybe you're uploading the wrong log. After booting, initiate a gui restart from the menu and this will create a timestamped log. Then do a manual CrossEPG run from the menu. If it gets stuck after the 13E load and subsequent move to 28.2E grab the debug log before you kill E2 and restart.

[abu baniaz]

Need to test this if I get a chance tonight. Could it be related to the ABM/Sky IT issue recently?

[dwarf]

The receiver doesn't create the log until I reboot though. This is the log straight after the reboot.

Like I said in the original post the quad plus had no issue. I'm wondering if it's a driver bug with xtrend. I don't use abm for Italy only 28.2 I use an edited version of vhannibals list for everything else.

I'll attempt to grab another log tomorrow, the wife is watching the TV just now so I can't interfere with that lol.

Thanks for all the help so far.



Sent from my HTC One_M8 using Tapatalk

[Huevos]

Clear the logs directory.
Do a GUI restart.
Do another GUI restart.

How many logs have you got in the logs directory?

Should be 2.

[dwarf]

Enigma2-16-08-2015_14-57-34.log

Yes I have 2 logs.

I'll do another crossepg download and upload the log. I can't reset the gui through the menus when its attempting to do a crossepg download though as its stuck with the message downloading channels. So I have been killing it via telnet.

For this log I will restart the gui through open webif.

[Huevos]

You don't need to kill it. Just grab the log.

[Huevos]

Still no entry in the log.

No idea what you are doing. Go into OpenTV setup. Make sure Sky It and Sky UK both have a tick. Then press yellow to download. If it stalls, grab the log.

[dwarf]

I don't have a log until the gui is restarted though?

[Huevos]

How can you not have the log? The logfile is continually updated and can be retrieved over ftp at any time.

[dwarf]

Ok I understand now why it wasn't working, Here is the new log. It has crossepg info in it this time.

[Huevos]

Put the USALS dish on feed 2, and fixed 28.2 on feed 4. Setup the tuner config and try again.

[dwarf]

OK I've done as suggested and now cross epg seems to be using the fixed dishes to do its download rather then the usals dish. The download is successful now

Sent from my HTC One_M8 using Tapatalk