My 3T Combo crashed, I plugged it out to reboot it
"Please wait" is displayed on the decoder with Open PLI on TV
will only load as far as 46%
But nothing happens
I tried plugging it out a few times but its stuck
any ideas how to sort it?
Thanks David
Last edited by davedub; 07-08-15 at 21:46.
Maybe you could try and remove any hard drives and flash drives first before rebooting.
Any idea how I would do that as it is stuck in reboot mode?
You are probably just best of reflashing your receiver with the latest Hades (Build 018) or OpenPLi or whichever image you wanna install.
Sent from my iPhone using Tapatalk
Vu+ Ultimo 4K with 3TB HDD, Dual FBC (Sat) tuners, 1x Twin Hybrid DVB-C/T/T2 tuner
Vu+ Solo 4K with 1TB HDD, Dual FBC (Sat) tuners, 1x Hybrid DVB-C/T/T2 tuner
Vu+ Solo 2 with 1TB HDD 'White Edition', 2x DVB-S2 tuners
Mut@nt HD2400 with 1TB HDD, 4x DVB-S2 tuners
Fixed 28.2E Technomate 65cm Mesh Satellite Dish with Inverto Unicable II/JESS LNB and Inverto Unicable Splitter
Fixed 28.2E Sky Zone 1 45cm Satellite Dish with Octo LNB
(All receivers installed with the latest Dev build)
how to I do that since the decoder wont boot up?
thanks for reply
You said its stuck in reboot mode, so you'll need a usb stick, formatted to fat32 then you will drop the file onto the root of the usb n flash the receiver. Instructions/guides can be found on openvix.co.uk
Sent from my iPhone using Tapatalk
Vu+ Ultimo 4K with 3TB HDD, Dual FBC (Sat) tuners, 1x Twin Hybrid DVB-C/T/T2 tuner
Vu+ Solo 4K with 1TB HDD, Dual FBC (Sat) tuners, 1x Hybrid DVB-C/T/T2 tuner
Vu+ Solo 2 with 1TB HDD 'White Edition', 2x DVB-S2 tuners
Mut@nt HD2400 with 1TB HDD, 4x DVB-S2 tuners
Fixed 28.2E Technomate 65cm Mesh Satellite Dish with Inverto Unicable II/JESS LNB and Inverto Unicable Splitter
Fixed 28.2E Sky Zone 1 45cm Satellite Dish with Octo LNB
(All receivers installed with the latest Dev build)
still couldn't get it to work any more suggestions.
Got it sorted thanks was having problems with the flashing put all sorted now
thanks
Reply With Quote
