Hello Guest, if you are reading this it means you have not registered yet. Please take a second, Click here to register, and in a few simple steps you will be able to enjoy our community and use our OpenViX support section.
Page 2 of 2 FirstFirst 12
Results 16 to 18 of 18

Thread: ip address?

  1. #16
    birdman's Avatar
    Title
    Moderator
    Join Date
    Sep 2014
    Location
    Hitchin, UK
    Posts
    7,798
    Thanks
    237
    Thanked 1,659 Times in 1,307 Posts
    Quote Originally Posted by cactikid
    this box is getting very weird how can one loss internal hdd and only usb seen in mounts ,rebooted and now visible lol
    Quote Originally Posted by Allyboy View Post
    Also have this issue can someone look into it.
    You might like to try manually selecting the mount point (even if you are setting it to the "default") in the settings.

    On my box the USB drive could occasionally end up being seen first at boot time, and this meant it ended up with the device that was normally allocated to the hdd. So I had a USB drive mounted as /media/hdd, and no hard-drive mounted.

    If you configure them manually then the mounting is done based on the UUID of the partition, which isn't affected by device order and so is not sensitive to response timings at boot-up.
    MiracleBox Prem Twin HD - 2@DVB-T2 + Xtrend et8000 - 5(incl. 2 different USBs)@DVB-T2[terrestrial - UK Freeview HD, Sandy Heath] - LAN/USB-stick/HDD

  2. #17

    Title
    Junior Member
    Join Date
    May 2014
    Location
    Northern Ireland
    Posts
    22
    Thanks
    4
    Thanked 6 Times in 4 Posts
    Quote Originally Posted by birdman View Post
    You might like to try manually selecting the mount point (even if you are setting it to the "default") in the settings.

    On my box the USB drive could occasionally end up being seen first at boot time, and this meant it ended up with the device that was normally allocated to the hdd. So I had a USB drive mounted as /media/hdd, and no hard-drive mounted.

    If you configure them manually then the mounting is done based on the UUID of the partition, which isn't affected by device order and so is not sensitive to response timings at boot-up.
    Sorry what do you mean manually selecting it i think i have it set this way going to mount manager and setting usb to media/usb and hdd to media/hdd?

  3. #18
    birdman's Avatar
    Title
    Moderator
    Join Date
    Sep 2014
    Location
    Hitchin, UK
    Posts
    7,798
    Thanks
    237
    Thanked 1,659 Times in 1,307 Posts
    Quote Originally Posted by Allyboy View Post
    Sorry what do you mean manually selecting it i think i have it set this way going to mount manager and setting usb to media/usb and hdd to media/hdd?
    That souns like it. That will mean you have lines like this:
    Code:
    UUID=9C44-07B8  /media/usb      vfat    defaults        0 0
    UUID=75a26202-818f-441f-bfd2-b94134d0eef0       /media/hdd      auto    defaults0 0
    at the end of the /etc/fstab file.
    If you've already done that then I don't have any other ideas - other than the HDD fails to spin up sometimes, which (I suppose) might happen if you have a power supply that is near the (lower) voltage limits.
    MiracleBox Prem Twin HD - 2@DVB-T2 + Xtrend et8000 - 5(incl. 2 different USBs)@DVB-T2[terrestrial - UK Freeview HD, Sandy Heath] - LAN/USB-stick/HDD

Page 2 of 2 FirstFirst 12

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  
This website uses cookies
We use cookies to store session information to facilitate remembering your login information, to allow you to save website preferences, to personalise content and ads, to provide social media features and to analyse our traffic. We also share information about your use of our site with our social media, advertising and analytics partners.