Please Post your tested working brand of WIFI Dongle on the Vu

[zenith]

mine is an intenso 16gb and afreecom 16gb both work fine on my vu duo

[palbhan]

Hi,
I am new to vix. I have vu + duo with vix image 2.2.11. I have wifi dongle from dlink 300 mbps. Is there any vix image that works with wifi dongle please? I would prefer to stay with vix images thats why I am asking. Any help is much appreciated.

[rickfun]

Dynamode WL-700N-XSX anyone know if this works with the vu+ duo

[Kmicic]

Hello,

Just bought the "original" (RALINK) Vu+ 300 Mbps and stuck it into the front USB port - nothing ! The LED does not light up, the unit doesn't seem to recognize it at all . I'm running the VTI Team Image 5.0.X freshly downloaded and installed today :-). Any ideas of how to get the network working? Thanks!

http://www.ralinktech.com/en/02_prod...ct.php?sn=1007

802.11b/g/n 1T1R 2.4 GHz USB Single Chip
Highly integrated with PA, LNA, T/R switch, and diversity switch

Overview
The RT5370 is a cost-effective, highly integrated USB Wi-Fi single chip containing an 802.11n MAC and baseband, a 2.4 GHz RF, PA, LNA and T/R switch on a single die. It supports a 150 Mbps PHY data rate and fully complies with 802.11b/g/n specifications, providing feature-rich wireless connectivity at high standards, and delivering reliable throughput from an extended distance. Optimized RF architecture and baseband algorithms provide superb performance with low power consumption.

[yngvekl]

I don't have this adapter, but on my Vu+ Duo, only the lower USB port on the rear side is accepting my WLAN adapter...not the front and not the upper port on the rear side... go figure! This is the same on different images...

/Yngve

[gazza341]

i've just got one of these from here - works perfect, no extra drivers required - PnP, very cheap, very small.
actual item here

sku_48166_1.jpg

[rikesh]

TP-Link TL-WN723N (Version 2)(White)

Working on Vu+ Solo

[chief10butties]

TP-Link TL-WN723N (Version 2)(White)

Working on Vu+ Solo

what drivers have you installed to get this working I'm new to the wireless side of all this. I have had it wired for a few years now but on moving house its just not available now i have bridged a router atm but it has some issues as I don't have a good enough second router to do it with. I am using this on a dm800hd I MUST READ THE RULES!

[Sicilian]

what drivers have you installed to get this working I'm new to the wireless side of all this. I have had it wired for a few years now but on moving house its just not available now i have bridged a router atm but it has some issues as I don't have a good enough second router to do it with. I am using this on a dm800hd I MUST READ THE RULES!

Clones are not supported here, go and re-read the rules!


Sent from my iPhone using Tapatalk

[Spoof]

TP-Link TL-WN823N 300Mbps NOT working. I did get it working once but very intermittent (almost impossible to get it to connect to a network).
Based on the realtek RTL8192CU chipset.


spooooooo

[rikesh]

Edimax EW-7811Un working after installing the Realtek drivers through the Plugins menu and only on WPA (not WPA2).

[zino]

I am using TP-Link TL-WN723N (says Ver 2.2 on packaging) it connects but is incredibly slow, slower than the old wireless g bridge I was using.
I got this for faster speeds when I ftp videos to my box.
All my other wireless n devices in that room connect and files transfeer at great speed but not this adapter with my Vu+ solo2

[amar786]

Can anyone recommend a dongle for a vu uno. I have a dongle like gazza341 but it is very slow and not stable. My azbox (built in wifi) has great better signal even though it's further away. Reading previous comments th*D-Link DWA-140 sounds like the best option? Has it been tested on the uno by anyone.

[amar786]

Hi Can anyone tell me the best driver for the D-Link DWA-140 dongle? I have the VIX image

Many thanks

[Rob van der Does]

Hi Can anyone tell me the best driver for the D-Link DWA-140 dongle? I have the VIX image

Please post your own issue in your own thread; don't high jack a completely different thread for this.