Hi I am seeing some blockiness in my pictures occasionally watching HD running Vix hades 012 image with blue HD skin what is the best place to start troubleshooting this.
can anyone suggest what the problem might be?
thanks
Embazzy
what do you mean by blockiness? a photo may help
Its difficult to get a picture as its intermittent its like a signal issue the picture has a line of squares happens on some channels more than others wondering if its a resolution issue just changed my mode and refresh rate and content settings and it seems to be ok if someone would care to share their settings and I can compare that would be good
thanks
Embazzy
it doesn't sound like a resolution issue. I have mine setup to 1080i and multi refresh rate. are you using mgcamd or ccam or oscam.
Embazzy (13-06-15)
If I can capture a shot of it I will post thanks for your settings
I would check your cabling n reconnect your f-connectors at the back of the receiver first.
Sent from my iPhone using Tapatalk
Last edited by Andy_Hazza; 13-06-15 at 16:20.
Vu+ Ultimo 4K with 3TB HDD, Dual FBC (Sat) tuners, 1x Twin Hybrid DVB-C/T/T2 tuner
Vu+ Solo 4K with 1TB HDD, Dual FBC (Sat) tuners, 1x Hybrid DVB-C/T/T2 tuner
Vu+ Solo 2 with 1TB HDD 'White Edition', 2x DVB-S2 tuners
Mut@nt HD2400 with 1TB HDD, 4x DVB-S2 tuners
Fixed 28.2E Technomate 65cm Mesh Satellite Dish with Inverto Unicable II/JESS LNB and Inverto Unicable Splitter
Fixed 28.2E Sky Zone 1 45cm Satellite Dish with Octo LNB
(All receivers installed with the latest Dev build)
Embazzy (13-06-15)
all sorted it was a cable issue thanks Andy
Embazzy
Andy_Hazza (13-06-15)
Glad you sorted it @Embazzy🏼
Sent from my iPhone using Tapatalk
Vu+ Ultimo 4K with 3TB HDD, Dual FBC (Sat) tuners, 1x Twin Hybrid DVB-C/T/T2 tuner
Vu+ Solo 4K with 1TB HDD, Dual FBC (Sat) tuners, 1x Hybrid DVB-C/T/T2 tuner
Vu+ Solo 2 with 1TB HDD 'White Edition', 2x DVB-S2 tuners
Mut@nt HD2400 with 1TB HDD, 4x DVB-S2 tuners
Fixed 28.2E Technomate 65cm Mesh Satellite Dish with Inverto Unicable II/JESS LNB and Inverto Unicable Splitter
Fixed 28.2E Sky Zone 1 45cm Satellite Dish with Octo LNB
(All receivers installed with the latest Dev build)
all sorted please delete
Hi I thought I had this fixed but still happening but worse now I am recording on another tuner whilst this is happening when my recording finishes I can check whether this has affected the other tuner or noti have 2 separate connections at present is it worth trying a loop cable instead?
Embazzy
Last edited by Embazzy; 14-06-15 at 15:05.
is your local card ok?
Vu Ultimo4K, OpenViX 5.0, 8xdvb-c, 8xdvb-s2, 2xdvb-t2
Vu Solo4K, OpenViX 5.0, 8xdvb-s2
Dreambox DM900, OpenViX 5.0, 2xdvb-s2, 2xdvb-c/t2
Terrestrial, Cable, Fixed 28.2e + Unicable2 LNB
Are you getting on Free to Air channels?
D I S C L A I M E R
My right to post information is protected under the rights for freedom act. In all instances, information discussed here on my posts are either hypothetical in nature, out of general curiosity, common knowledge, public knowledge, or role-play. Any use of the collective descriptions and shared knowledge from any of my posts are at the sole discretion of the reader. I am not responsible for what you do with it!
Please help keep OpenViX online, donate HERE.
Rules can be found HERE
Support our sponsor World-Of-Satellite HERE
GIGABLUE UHD QUAD 4K, VU+ DUO 4K SE, ZGEMMA H7S, VU+ UNO 4K SE
Triax 1.1m Powered by TM2600, Fixed 28.2 Zone 2 dish with GT-SAT Unicable
I thought it was but Mrs was saying she had problems watching catch up she neglected to tell me about cos she thought it was something to do with my new receive I will investigate and get reply to this when I have checked
free to air channels are ok but anything else hd and the blockiness starts have changed cables terminated them again but still not workingcant connect at present to the box to grab a screen shot either ip is right but something not
I have now done some more testing , I have tuner a (dvb-c) looped through to tuner b (dvb-c) and have disabled tuner a and picture is back to normal no breaking up I think I may have an issue with tuner a , tomorrow I will swap the tuners around and see if the picture interference follows the tuner, is this just a straight swap seeing as they are both the same model?
thanks in advance
Embazzy
Posting Permissions
Reply With Quote