PM sent. Please upload output here if possible.
PM sent. Please upload output here if possible.
Originally Posted by abu baniaz
Output files and logs attached. There may well be a little more 'log' than necessary since I didn't clear them down first . . . !
DoverFreeview.zip
Mut@nt HD2400 - 1TB HDD, 2x DVB-S/S2 + 1x DVB-C/T/T2
abu baniaz (29-05-15)
Thanks. I'll ask the coders to have a look.
We need working and non working lamedb files to compare.
So, what is that scan. Is it from ABM or E2?
It's using ABM
Mut@nt HD2400 - 1TB HDD, 2x DVB-S/S2 + 1x DVB-C/T/T2
Ok, can you post a lamedb from a clean manual scan of terrestrial please.
OK. Files cleared down and manual scan(s) run.
First I ran a manual scan on Auto, which only lists 7 channels. The ones from C53 (730.0MHz) :
Auto.jpg
Then a manual scan of DVB-T to get the rest:
DVB-T.jpg
Resulting lamedb file here: lamedb.zip
Mut@nt HD2400 - 1TB HDD, 2x DVB-S/S2 + 1x DVB-C/T/T2
Huevos (28-05-15)
So your standard E2 scan doesn't receive any HD channels. You need to do a complete T2 scan.
Please try the attached file and scan with ABM again. Goes inCode:/usr/lib/enigma2/python/Plugins/SystemPlugins/AutoBouquetsMaker/custom
Last edited by Huevos; 28-05-15 at 14:59.
Yes you are correct, however, it is the TSID which is required for your area for correct T1 scanning. The xml did not contain the T2 channels becasue your lamedb did not have them.
We are stepping in the right direction. Can you do a manual complete scan, selecting T2. Then upload the resulting lamedb file. I have edited this thread to include Huevos's new script and also a picture of scan mode to be used.
Ah, OK, so lamedb gets overwritten rather than appended to on subsequent scans? I wasn't aware of this. I'll run tomorrow remotely when the wife is out.
Sorry, I don't see the edit you mention?
Mut@nt HD2400 - 1TB HDD, 2x DVB-S/S2 + 1x DVB-C/T/T2
Probably because I forgot to paste the link.
http://www.world-of-satellite.com/sh...input-required
By the look of the ABM scan, Dover mast is just a repeater of Bluebell Hill. So the DVB tables ABM is scanning correspond to the frequencies transmitted by Bluebell Hill mast, rather than Dover.
http://www.ukfree.tv/transmitters/tv/Bluebell_Hill
PSB1 on Dover is C50, on Bluebell hill is C46. PSB2 on Dover is C51, on Bluebell Hill is C43. Should be obvious from channel service display which transmitter OP is receiving from. Dover is 80kW, Bluebell Hill is 20kW
GB Quad Plus, Mut@nt HD51, AX HD61, 80cm dish and Supreme Dark motor. Sony TA-AN1000, Sony UBP-X800M2 Bluray, Odroid N2+ (CoreElec), Monitor Audio Bronze 5.1 speakers