Mate same thing has just happened to me I were watching madrid's football match and the box totally froze I then powered it off at the back
Mate same thing has just happened to me I were watching madrid's football match and the box totally froze I then powered it off at the back
Just to confirm the box has crashed again while watching the madrid match this has never happened before
It crashed i've restarted my mgcamd and so far 10mins into it, it has not crashed all good for now
My box has crashed for the 3rd time
judge (22-04-15)
I've flashed the box again I will enable debug logs when it crashes again.
My posts contain my own personal thoughts and opinions, they do not represent those of any organisation or group but my own.
If you don't like what I post, Don't read it.
SIMPLES.
I will keep that in mind in the future I will set up everything once again.
Hello Manny, I had the same issue with a TM Nano 2 super about a month or so ago. Only had the receiver on for 1 hour & it just froze then went to a black screen & would not respond to any button press with the remote, would only work again if rebooted then it would work for about an hour if the channel wasn't changed less if changing channel a few times & even less if using tsmedia or any other plugin. I ended up sending the receiver back, still don't actually know what was causing it, was told it could be faulty receiver or corrupt image. The manufacturer/developers must know there is a problem with these receivers because it's been happening to a few others who have TM receivers whether it's Nano2 super/Nano3T. Personally I think its drivers/hardware compatibility issue. Do not waste any more time with the receiver, send it back to the supplier/manufacturer, they need to address this issue, because whether some people like it or not it is an issue that's happening more & more! Hope you get things sorted one way or another mate!
Should I send my TM-3T combo back???
Linux receivers can be customiseable with various things added to it that could affect how it performs and how it affects other items. Look at the thread with the chap with mgcamd, if he sends his receiver back saying it "it is killing my network, it's faulty", he's right and he's not right at the same time. Nothing to do with the hardware though.
If there is a fault, it will be replaced. However, nobody knows what the isssue is without the logs.
Most retailers will tell you to run the receiver with no additional plugins installed and FTA only. If you still have an issue running that way, it can only be a hardware issue. They will usually replace it.
Speak to your retailer and follow their advice.
I have a courier picking up the box tomorrow now its time to find an alternative any help people?