How do I do that buddy. Would I use the Vu+ remote on my Solo2 to change the code?Originally Posted by pheonix
Vu+ Ultimo 4K with 3TB HDD, Dual FBC (Sat) tuners, 1x Twin Hybrid DVB-C/T/T2 tuner
Vu+ Solo 4K with 1TB HDD, Dual FBC (Sat) tuners, 1x Hybrid DVB-C/T/T2 tuner
Vu+ Solo 2 with 1TB HDD 'White Edition', 2x DVB-S2 tuners
Mut@nt HD2400 with 1TB HDD, 4x DVB-S2 tuners
Fixed 28.2E Technomate 65cm Mesh Satellite Dish with Inverto Unicable II/JESS LNB and Inverto Unicable Splitter
Fixed 28.2E Sky Zone 1 45cm Satellite Dish with Octo LNB
(All receivers installed with the latest Dev build)
I'm using the vu duo remote, i haven't got a Duo2 remote to try... sorry..
Andy_Hazza (12-04-15)
Quite easily.
On the RCU it self.
press and hold 2 and 7 for three seconds until the led turns red
press help
press 0001
That will set the remote to the Duo / Solo's code to get it back onto the Duo2 / solo2's code repeat and use the 0002 code instead of 0001
My posts contain my own personal thoughts and opinions, they do not represent those of any organisation or group but my own.
If you don't like what I post, Don't read it.
SIMPLES.
Andy_Hazza (12-04-15)
Can you just check a setting for me please? Can you go to menu, setup, system, remote control code and can you tell me what number you are on?
Vu+ Ultimo 4K with 3TB HDD, Dual FBC (Sat) tuners, 1x Twin Hybrid DVB-C/T/T2 tuner
Vu+ Solo 4K with 1TB HDD, Dual FBC (Sat) tuners, 1x Hybrid DVB-C/T/T2 tuner
Vu+ Solo 2 with 1TB HDD 'White Edition', 2x DVB-S2 tuners
Mut@nt HD2400 with 1TB HDD, 4x DVB-S2 tuners
Fixed 28.2E Technomate 65cm Mesh Satellite Dish with Inverto Unicable II/JESS LNB and Inverto Unicable Splitter
Fixed 28.2E Sky Zone 1 45cm Satellite Dish with Octo LNB
(All receivers installed with the latest Dev build)
If memory serves the Solo2 and Duo2 should be on Mode 2 by default, the Duo and Solo use Mode 1.
In total there are 4 different codes.
Mode 1 = 0001 Duo / Solo
Mode 2 = 0002 Uno / Ultimo / Solo2 / Duo2
Mode 3 = 0003
Mode 4 = 0004
Not sure what the Zero and SoloSE use as I have never used those.
My posts contain my own personal thoughts and opinions, they do not represent those of any organisation or group but my own.
If you don't like what I post, Don't read it.
SIMPLES.
No buddy, still doesn't work. Ah well it was a nice thought. lol. Thanks for that though buddy.🏼
Vu+ Ultimo 4K with 3TB HDD, Dual FBC (Sat) tuners, 1x Twin Hybrid DVB-C/T/T2 tuner
Vu+ Solo 4K with 1TB HDD, Dual FBC (Sat) tuners, 1x Hybrid DVB-C/T/T2 tuner
Vu+ Solo 2 with 1TB HDD 'White Edition', 2x DVB-S2 tuners
Mut@nt HD2400 with 1TB HDD, 4x DVB-S2 tuners
Fixed 28.2E Technomate 65cm Mesh Satellite Dish with Inverto Unicable II/JESS LNB and Inverto Unicable Splitter
Fixed 28.2E Sky Zone 1 45cm Satellite Dish with Octo LNB
(All receivers installed with the latest Dev build)
Just remember Andy if you change the RCU code on the receiver it self you must also do the same on the RCU it self, and if you do a fresh flash you must make sure the RCU is on the correct code otherwise you will be sat there scratching your backside wondering why the hell it wont work even though the L.E.D is lighting up when you press buttons LOL.
My posts contain my own personal thoughts and opinions, they do not represent those of any organisation or group but my own.
If you don't like what I post, Don't read it.
SIMPLES.
cant see a remote control code in system?
is it somewhere else?
Ahhhh just seen pheonixs post..
Last edited by ukbob; 12-04-15 at 13:40.
Menu> setup> system then go rite to the bottom of the screen and you should see the part that deals with the remote. you can change the code on the box from here, but you would still have to change the code on the remote too.
My posts contain my own personal thoughts and opinions, they do not represent those of any organisation or group but my own.
If you don't like what I post, Don't read it.
SIMPLES.
ukbob (12-04-15)
Have you tried all of the codes just to make sure it's not one of them ?.No buddy, still doesn't work. Ah well it was a nice thought. lol. Thanks for that though buddy.
My posts contain my own personal thoughts and opinions, they do not represent those of any organisation or group but my own.
If you don't like what I post, Don't read it.
SIMPLES.
Yeah tried em all mate but no joy.
Vu+ Ultimo 4K with 3TB HDD, Dual FBC (Sat) tuners, 1x Twin Hybrid DVB-C/T/T2 tuner
Vu+ Solo 4K with 1TB HDD, Dual FBC (Sat) tuners, 1x Hybrid DVB-C/T/T2 tuner
Vu+ Solo 2 with 1TB HDD 'White Edition', 2x DVB-S2 tuners
Mut@nt HD2400 with 1TB HDD, 4x DVB-S2 tuners
Fixed 28.2E Technomate 65cm Mesh Satellite Dish with Inverto Unicable II/JESS LNB and Inverto Unicable Splitter
Fixed 28.2E Sky Zone 1 45cm Satellite Dish with Octo LNB
(All receivers installed with the latest Dev build)
Ah well no worries.
My posts contain my own personal thoughts and opinions, they do not represent those of any organisation or group but my own.
If you don't like what I post, Don't read it.
SIMPLES.
When I changed my Duo2 remote because of the sticking metal buttons to the Solo2's remote, every time that I did a re-flash I had to put the battery's back in my Duo2 remote so that I could set up the Duo2 because the code is differentvery annoying, then I remembered that I had the Duo2 programed in to my Harmony 650, so now when I re-flash the Duo2 I use the Harmony for the initial set up and them change the code so that I can use the Solo2 remote
It would be easier to just change the code on the solo2 remote although I had assumed the solo2 and duo2 used the same code.When I changed my Duo2 remote because of the sticking metal buttons to the Solo2's remote, every time that I did a re-flash I had to put the battery's back in my Duo2 remote so that I could set up the Duo2 because the code is different
Sent from my iPad Air using Tapatalk
My posts contain my own personal thoughts and opinions, they do not represent those of any organisation or group but my own.
If you don't like what I post, Don't read it.
SIMPLES.
I reflashes 80% of the time using webif. Also using webif it's easy to change RC code.When I changed my Duo2 remote because of the sticking metal buttons to the Solo2's remote, every time that I did a re-flash I had to put the battery's back in my Duo2 remote so that I could set up the Duo2 because the code is different
Vu+ Duo2, OpenVix, 3xdvb-c
Vu+ SoloSE V2, OpenVix, 1xdvb-s2 , 1xdvb-c (Sundtek)
Vu+ SoloSE V2, OpenVix, 1xdvb-c
Vu+ SoloSE, OpenVix, 1xdvb-c
ET6500. OpenVix, 1xdvb-c
Motor 1m dish
Posting Permissions
Reply With Quote