Hello Guest, if you are reading this it means you have not registered yet. Please take a second, Click here to register, and in a few simple steps you will be able to enjoy our community and use our OpenViX support section.
Results 1 to 4 of 4

Thread: TM-Nano2 Super - Slow network performance

  1. #1

    Title
    Senior Member
    Join Date
    Dec 2010
    Posts
    174
    Thanks
    33
    Thanked 7 Times in 7 Posts

    Question TM-Nano2 Super - Slow network performance

    Hi,

    I have got my TM-Nano2 Super from the site sponsor.

    However I am having network difficulties and I experiencing freezing with softcams.

    If you look at my ping results the results are so high and I think that is the reason why my softcams loose connectivity and causes picture to freeze momentarily.

    My pings look like this:

    64 bytes from 10.0.1.20: icmp_seq=16 ttl=64 time=134.148 ms
    64 bytes from 10.0.1.20: icmp_seq=17 ttl=64 time=79.308 ms
    64 bytes from 10.0.1.20: icmp_seq=18 ttl=64 time=275.556 ms
    64 bytes from 10.0.1.20: icmp_seq=19 ttl=64 time=18.157 ms
    64 bytes from 10.0.1.20: icmp_seq=20 ttl=64 time=40.222 ms
    64 bytes from 10.0.1.20: icmp_seq=21 ttl=64 time=187.281 ms
    64 bytes from 10.0.1.20: icmp_seq=22 ttl=64 time=268.882 ms
    64 bytes from 10.0.1.20: icmp_seq=23 ttl=64 time=26.895 ms
    64 bytes from 10.0.1.20: icmp_seq=24 ttl=64 time=74.651 ms
    64 bytes from 10.0.1.20: icmp_seq=25 ttl=64 time=32.404 ms
    64 bytes from 10.0.1.20: icmp_seq=26 ttl=64 time=115.934 ms
    64 bytes from 10.0.1.20: icmp_seq=27 ttl=64 time=49.184 ms
    64 bytes from 10.0.1.20: icmp_seq=28 ttl=64 time=6.823 ms
    Request timeout for icmp_seq 29
    64 bytes from 10.0.1.20: icmp_seq=29 ttl=64 time=1087.284 ms
    64 bytes from 10.0.1.20: icmp_seq=30 ttl=64 time=1124.021 ms
    64 bytes from 10.0.1.20: icmp_seq=31 ttl=64 time=228.991 ms
    64 bytes from 10.0.1.20: icmp_seq=32 ttl=64 time=174.167 ms
    64 bytes from 10.0.1.20: icmp_seq=33 ttl=64 time=13.538 ms
    64 bytes from 10.0.1.20: icmp_seq=34 ttl=64 time=91.358 ms
    64 bytes from 10.0.1.20: icmp_seq=35 ttl=64 time=17.595 ms
    64 bytes from 10.0.1.20: icmp_seq=36 ttl=64 time=531.762 ms
    64 bytes from 10.0.1.20: icmp_seq=37 ttl=64 time=448.347 ms

    Anyone may know reason why. I have this connected to Airport extreme. Previously I had the VU+ Duo which I ever had a problem with.

    Tried the usual rebooting everything etc but nothing.

    Thanks

  2. #2
    Sicilian's Avatar
    Title
    The Boss
    Join Date
    Mar 2010
    Posts
    29,649
    Thanks
    23,585
    Thanked 26,054 Times in 7,638 Posts
    Hard wire the Nano 2 Super to check the receiver. If hardwired is fine the issue lies elsewhere.
    D I S C L A I M E R

    My right to post information is protected under the rights for freedom act. In all instances, information discussed here on my posts are either hypothetical in nature, out of general curiosity, common knowledge, public knowledge, or role-play. Any use of the collective descriptions and shared knowledge from any of my posts are at the sole discretion of the reader. I am not responsible for what you do with it!

    Please help keep OpenViX online, donate HERE.
    Rules can be found
    HERE
    Support our sponsor World-Of-Satellite
    HERE
    GIGABLUE UHD QUAD 4K, VU+ DUO 4K SE, ZGEMMA H7S, VU+ UNO 4K SE
    Triax 1.1m Powered by TM2600, Fixed 28.2 Zone 2 dish with GT-SAT Unicable





  3. #3

    Title
    Senior Member
    Join Date
    Dec 2010
    Posts
    174
    Thanks
    33
    Thanked 7 Times in 7 Posts
    It has been hard wired all this time into my AirPort Extreme router.

  4. #4

    Title
    Senior Member
    Join Date
    Dec 2010
    Posts
    174
    Thanks
    33
    Thanked 7 Times in 7 Posts
    Ok I have found the answer to my problem.

    It was CCcam that was the problem. I tried using version 2.1.4 and 2.2 which both caused these problems with freezing.

    As soon as I started using CCcam version 2.3 then everything became fine.

  5. The Following User Says Thank You to avatar7 For This Useful Post:

    Sicilian (31-01-15)

Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  
This website uses cookies
We use cookies to store session information to facilitate remembering your login information, to allow you to save website preferences, to personalise content and ads, to provide social media features and to analyse our traffic. We also share information about your use of our site with our social media, advertising and analytics partners.