OpenWebif Streaming

[judge]

Was tuned to the same channel dunno about what it said

Using the same working tuner/tuner config/feed so.

I did have PiP working earlier though on 2 different channels

Do you remember the channels? If on the same transponder, PIP would work on a single feed/tuner. If not, both tuners were working.

I've tried flashing a 4D image instead of Vix to see if it notices the second tuner

Let us know how you get on...

[neo1607]

No luck with the 4D image, second tuner still isn't showing anything

Poor show when a £199 box has a dodgy 2nd tuner

Wouldn't mind but will most likely have to wait till after new year now before getting a replacement box which is frustrating

[neo1607]

Just wondering if anyone else has had this problem

Tried swapping lnb feed cables about on the box, tried moving sockets on the lnb to see if it was maybe just a dodgy feed, even tried several different images. Tuner B just refuses to pick up a signal.

Box was only delivered yesterday (23rd Dec) just a shame if the tuner is dead because I will have to wait till 5th Jan to get a new one now.


Is there anything else I could possibly try?

[cactikid]

is tuner b setup correctly for the sat you are using,recheck tuner configuration?

recheck your f connector and you dont have a splitter on the cables.

[neo1607]

No splitter on the cables, they came straight off a Sky setup, so the cables go direct to the LNB, and the f connectors should be fine as both feeds get 95% strength on my old sky box.

Tuner B is setup correctly as far as I can tell

[cactikid]

looks correct may need to see what others suggest and the core of f plug looks ok as i had that on a duo for weeks and blank recordings

[abu baniaz]

Going by your other thread, you have tried everything. Send a message to the seller and he'll get back to you soon.

[Larry-G]

Try disabling all tuners but tuner B and see if it picks any thing up, also never assume any thing, if in doubt remove and refit the f-plugs after all its a two minute job and will guarantee they are fitted and working correctly, instead of just assuming so.

[jwestwood74]

I had the same problem with my nano2 super by trial and error i stripped off the outer shield wire on the b wire and everything now works perfectly it was almost like it was shorting it out

[abu baniaz]

Please see this thread so OP does not have to keep repeating himself

http://www.world-of-satellite.com/sh...ebif-Streaming

[jwestwood74]

I had the same problem with my nano2 super by trial and error i stripped off the outer shield wire on the b wire and everything now works perfectly it was almost like it was shorting it out

[Larry-G]

I had the same problem with my nano2 super by trial and error i stripped off the outer shield wire on the b wire and everything now works perfectly it was almost like it was shorting it out

yes thats why I say don't just assume the cables and f-plugs are ok if they were working on a previous system, just unscrewing them from one receiver can be enough to cause issues.

[neo1607]

Thanks abu baniaz for linking to the other thread e-mailed the forum sponsor yesterday but no response yet, I understand he is closed for the festive season which is why im trying to resolve this myself as I don't really want to wait till 5th Jan for a replacement

[Larry-G]

Please see this thread so OP does not have to keep repeating himself

http://www.world-of-satellite.com/sh...ebif-Streaming

The OP would not need to repeat him self if he did not start multiple threads for the same issue. one is more than sufficient and will cause less confusion for those trying to help him.

[jwestwood74]

i had to totally remove the shield wire and just have the copper centre in place completly wierd i know