TM-800 HD owners to kindly return their product

[jusaju]

News

TM-800 HD Linux
2nd December 2010
To all owners of the TM-800 HD:

We have reprogrammed the CPU in the TM-800 HD in order to better support the software core and application levels. As a result, we are asking all TM-800 HD owners to kindly return their product (complete with remote control) to our Headquarters at:

Technomate Ltd
Unit 11 Nobel Road
Edmonton
London N18 3BH
Tel: 020 8884 0701 begin_of_the_skype_highlighting 020 8884 0701 end_of_the_skype_highlighting

We sincerely apologise for the inconvenience caused. We will compensate £8 towards your postage. Please include a copy of your receipt, address and telephone number. Once we receive your TM-800 HD, we will send it out to you within 2 working days. It will be returned to you free-of-charge.

If you are outside the UK, please contact us at: tech@technomate.com or at 0044 20 8884 0701 begin_of_the_skype_highlighting 0044 20 8884 0701 end_of_the_skype_highlighting.

We will also update your TM-800 HD to the latest software:

Fixed in 30/11/10 software:
1. No more freezing on HD channels
2. Signal and signal lock have been fixed and also sensitivity has increased
3. OSD speed has been improved
4. Card reader OK
5. Performance improved
6. USB mount fixed
7. Default channel list supported
8. PVR Record & Play fixed (except trick play)

By 6/12/10:
1. PVR trick play
2. AC3 & stereo sound fixed (when AC3 changes to stereo)

By 23/12/10:
1. Web-x TV
2. Media player
3. Network samba
4. Trick play
5. Others

[fulabeer]

Why would they need your remote control?
(i would check this IS Technomates address!)

[notanotherone]

Why would they need your remote control?
(i would check this IS Technomates address!)

yep it is mate just google technomate


heres the phone number as well
020 88840275

[jusaju]

Why would they need your remote control?
(i would check this IS Technomates address!)

Hi
At first I check always from official sites these kind of things.
Why you did not check technomate .com it´s also in 1.st message.

Why remote control..I do not know.And do not call them cause I do not have tm-800.
(eg. earlier Qbox hd changed their remotes if buyers wanted to...but this is not similar case)

[sonc]

If you put the address into Google maps, it actually says Technomate on the map

[Sicilian]

I can verify the details above are 100% correct.

[bassethound]

I can verify to this is the correct address i have sent my first tm800 there when it died after 3 days of ownership.

I read on a forum a while back that there are 2 versions of the same remote so they will probably swap out the older ones

[abu baniaz]

I took mine in this morning. I had an hour's wait (three people in front). They've fitted a new cover with a fan although I'm sure they've done more under the bonnet.

[bassethound]

Have you tried out the new image?

[pooface]

I took mine in this morning. I had an hour's wait (three people in front). They've fitted a new cover with a fan although I'm sure they've done more under the bonnet.

If it was only an hours wait, and there were 3 people in front of you, there might not be that much to do. That's 20 minutes per person. They probably just had to swap over the cpu, do a few little wire additions for the fan, and job done... Did you take your remote control in with you? Did they change that at all???

[silverfox0786]

If it was only an hours wait, and there were 3 people in front of you, there might not be that much to do. That's 20 minutes per person. They probably just had to swap over the cpu, do a few little wire additions for the fan, and job done... Did you take your remote control in with you? Did they change that at all???

its possible poo that they have more techies working and it was 1 per techy and it took an hour

to change a cpu thats soldered to the board it intricate work with a solderstation

[bassethound]

All they are doing is Jtagging to reprogramming the processor

[silverfox0786]

All they are doing is Jtagging to reprogramming the processor

oh rite a jtag job i remeber when i used to make them ruddy things using 25pin dsub

[rubberduck]

Have you tried out the new image?

Hi, which is the latest image?

[bassethound]

See first post about putting a new image on the tm800