internal HDD
Mutant HD 2400
internal 1TB HDD fdisk command not work
Have you tried to initialize the HDD from within the image it self ?.
My posts contain my own personal thoughts and opinions, they do not represent those of any organisation or group but my own.
If you don't like what I post, Don't read it.
SIMPLES.
Fish & chip shop, how do I know if it's Cod, Haddock or Plaice served in batter?Originally Posted by keltosa
On a serious note, we now the box you're using thanks to your thread title, we don't know the image or build number used though?
Have you tried any image options to format the HDD rather than fdisk?
The more info you provide the better & easier it is to point you towards a working solution.
hd2400 login: root
root@hd2400:~# fdisk -l
-sh: fdisk: not found
root@hd2400:~# sfdisk -l
Disk /dev/mtdblock0: 130 cylinders, 255 heads, 63 sectors/track
Disk /dev/mtdblock1: 0 cylinders, 255 heads, 63 sectors/track
Disk /dev/mtdblock2: 129 cylinders, 255 heads, 63 sectors/track
root@hd2400:~#
sorry to jump on somebody's post..thought it was a waste to start another,,,i would like to install an internal 2.5inch hard drive.but cant see where it goes inside.thank you
Remove lid, look in the corner near front panel, you will see a small board with 4 screws holding it in place. Remove screws, lift out, attached HDD, lower into place, slide into connecter and re-screw in place.
D I S C L A I M E R
My right to post information is protected under the rights for freedom act. In all instances, information discussed here on my posts are either hypothetical in nature, out of general curiosity, common knowledge, public knowledge, or role-play. Any use of the collective descriptions and shared knowledge from any of my posts are at the sole discretion of the reader. I am not responsible for what you do with it!
Please help keep OpenViX online, donate HERE.
Rules can be found HERE
Support our sponsor World-Of-Satellite HERE
GIGABLUE UHD QUAD 4K, VU+ DUO 4K SE, ZGEMMA H7S, VU+ UNO 4K SE
Triax 1.1m Powered by TM2600, Fixed 28.2 Zone 2 dish with GT-SAT Unicable
Hi
Can anybody please tell me how big of an hard drive can be fitted internally to the hd2400
mut@nt imaj
openvix-Apollo.153-mutant2400
openatv-4.2-mutant2400
OpenPLi-4.0-beta-hd2400
Sorry, the are not working fdisk
http://www.world-of-satellite.co.uk/...-2x-DVB-C-T-T2
Mut@nt HD2400 Specification:
SATAIII: 1x internal
Initialize the drive via the image it self.
My posts contain my own personal thoughts and opinions, they do not represent those of any organisation or group but my own.
If you don't like what I post, Don't read it.
SIMPLES.
usb Hdd ok
internal hdd not working
Check your mounts in mount manager, Blue button > ViX > Mount manager.
D I S C L A I M E R
My right to post information is protected under the rights for freedom act. In all instances, information discussed here on my posts are either hypothetical in nature, out of general curiosity, common knowledge, public knowledge, or role-play. Any use of the collective descriptions and shared knowledge from any of my posts are at the sole discretion of the reader. I am not responsible for what you do with it!
Please help keep OpenViX online, donate HERE.
Rules can be found HERE
Support our sponsor World-Of-Satellite HERE
GIGABLUE UHD QUAD 4K, VU+ DUO 4K SE, ZGEMMA H7S, VU+ UNO 4K SE
Triax 1.1m Powered by TM2600, Fixed 28.2 Zone 2 dish with GT-SAT Unicable
Sorry,
Initalisation Fotmat HDD > no storage devices found
Last edited by keltosa; 13-03-15 at 15:45.
Here are some pictures
Mut@nt Hard Drive 4.jpg Mut@nt Hard Drive.jpg Mut@nt Hard Drive 3.jpg
Wizard55 (09-04-15)
1. Can you hear any activity from the HDD during boot up?
2. What is shown in device information?
Menu > Information > Devices
3. Is HDD listed in mount Manager, (even if not mounted)?
Blue > Vix > Mount Manager
4. Can you telnet following command and post back results
Code:df -h
Posting Permissions
Reply With Quote
