No now is 192.168.0.3, the other one was when i turned off dhcp.Originally Posted by ronand
Who flashed the receiver for you?
Zgemma H7S running OpenVIX 6.2, Darkmotor, Triax TD110 dish, Inverto Black Ultra dual lnb
LG 50UM7450 4K TV, Pioneer VSX-534 Atmos AVR , Panasonic UB820 region free 4K Bluray & a PS4.
WOS , got it today.
Total Commander (+FTP plugin installed) : root + dreambox input and that is all, should work.
so what exact error is it giving you ?.
My posts contain my own personal thoughts and opinions, they do not represent those of any organisation or group but my own.
If you don't like what I post, Don't read it.
SIMPLES.
if you have an android phone or tablet, you can use total commander too
"connection failed, connection refused"
Should i flash the image again?
If yes, do i need to flash bootloader ?
I already downloaded the image.
Yes try refashing the image, no you wont need a bootloader as the sponsor would have done that prior to shipping when he flashed the image in the first place.
My posts contain my own personal thoughts and opinions, they do not represent those of any organisation or group but my own.
If you don't like what I post, Don't read it.
SIMPLES.
Check in network settings that FTP service is running.
D I S C L A I M E R
My right to post information is protected under the rights for freedom act. In all instances, information discussed here on my posts are either hypothetical in nature, out of general curiosity, common knowledge, public knowledge, or role-play. Any use of the collective descriptions and shared knowledge from any of my posts are at the sole discretion of the reader. I am not responsible for what you do with it!
Please help keep OpenViX online, donate HERE.
Rules can be found HERE
Support our sponsor World-Of-Satellite HERE
GIGABLUE UHD QUAD 4K, VU+ DUO 4K SE, ZGEMMA H7S, VU+ UNO 4K SE
Triax 1.1m Powered by TM2600, Fixed 28.2 Zone 2 dish with GT-SAT Unicable
With a computer in windows > start > run > ping xxx.xxx.x.xxx the x's are your IP address to see if it is seeing your Box address. If OK then it is a matter of filling in the info correctly.
Working now after re-flashing image.
Thanks for everything , you were fantastic.
I've always used user name 'root' and password as well 'root' on my GigaBlue HD Quad Plus with OpenVIX, and has worked every time. Except for the recent OpenVIX images (since Apollo 25 or so) which do not support my wifi dongle. But using OpenMIPS or OpenATV also same user name and password do the thing.
Posting Permissions
Reply With Quote
