smargo and Vu+ ?

[malsat]

Hi
I have 2 cards in slots and want to add a third with smargo reader in back usb slot,how do i do it?
I have gone into blue panal then settings then kernel modules and turned smargo and other usb card readers to yes,but cant see card in entitlements.

[Sicilian]

I've not had a chance to test a smargo on VU+ Duo yet, but off the top of my head I think you may need to add a line something like this to your CCcam.cfg: -

SMARTCARD CLOCK FREQUENCY: /dev/ttsUSB0 XXX0000 <<< Replace the XXX the spead, e.g 357, 600 etc..

You also need to set the smargo to:-

Autoswitch
Dreambox
T=0
EGT 0

With the software on the link below, using a windows PC.

http://www.vuplus-support.co.uk/show...ull=1#post1152

[malsat]

this is what i get in CCcam info:
card reader /dev/usb/tts/0
no or unknown card inserted

[Sicilian]

this is what i get in CCcam info:
card reader /dev/usb/tts/0
no or unknown card inserted

Did you use the config line I posted above? If so I dont understand why your getting /dev/usb/tts/0

Look closely at the config line: -

SMARTCARD CLOCK FREQUENCY: /dev/ttsUSB0 XXX0000 <<< Replace the XXX the spead, e.g 357, 600 etc..

[malsat]

I have tried your config line and the other from other forum,this is using yours:
card reader /dev/ttsUSB0
no or unknown card inserted

[malsat]

sorted
thanks

[Sicilian]

sorted
thanks

How did you sort it? Please post the info so it will help others.

[helios]

did it work with this settings in cccam,cfg file ?

SERIAL READER : /dev/usb/tts/0 smartreader+
SMARTCARD CLOCK FREQUENCY: /dev/usb/tts/0 6000000

Please inform us

[malsat]

SERIAL READER : /dev/ttyUSB0
SMARTCARD CLOCK FREQENCY : /dev/ttyUSB0 6000000

I was putting the confg lines in example and no removing the hash.
Hope this helps

[Sicilian]

Does /dev/ttyUSB0 6000000 work then? I thought it had to be /dev/ttsUSB0 6000000 on VU+ or Dreambox. Can you confirm please.

[malsat]

I confirm they work for me in my Vu+,I have 3 locals in and adding a fourth next week.

[Sicilian]

I confirm they work for me in my Vu+,I have 3 locals in and adding a fourth next week.

Did you use tts or tty in the config line?

[malsat]

SERIAL READER : /dev/ttyUSB0
SMARTCARD CLOCK FREQENCY : /dev/ttyUSB0 6000000

[grtmoby]

what is the difference between tts and tty

[Sicilian]

Ignore tts, I believe that was used with with earlier dreambox kernals.