heres the latest build
if you havent installed from the feeds and have been installing the rars i put on, install this ipk and then you'll get the updates through online system updates.
Vu Ultimo4K, OpenViX 5.0, 8xdvb-c, 8xdvb-s2, 2xdvb-t2
Vu Solo4K, OpenViX 5.0, 8xdvb-s2
Dreambox DM900, OpenViX 5.0, 2xdvb-s2, 2xdvb-c/t2
Terrestrial, Cable, Fixed 28.2e + Unicable2 LNB
Ok I'll flash it the skin back and then send you the log. Thanks.Originally Posted by rossi2000
VU+ Duo
1TB Internal HDD [Recordings + PTS]
8GB Kingston Micro External USB [CrossEPG + 256MB Swap + Ocrams Picons + Setting Backups + Image Backups]
Plugins: CrossEPG Downloader + Media Scanner + OpenWebif + Picture Player + Cache Flush
Vix 3 - 808 --> Vix Zeus 23 --> Vix Helios 16 --> Vix Apollo 153 -->Vix Hades
still on bluehd will wait a bit and will check later .
Mine is slow when selecting channel list nearly 2 seconds for screen to load using Apollo 008 on Duo2
VU+Duo2 5.2.025
ive noticed this now too, after i was doing some tweaks to blue-hd and reverted back over to red-hd i noticed the difference,
not to the extent as some mention but it is now noticeable.
there is a slight slowerness to this one for some reason, hmmm.
gonna have to try and investigate.
Vu Ultimo4K, OpenViX 5.0, 8xdvb-c, 8xdvb-s2, 2xdvb-t2
Vu Solo4K, OpenViX 5.0, 8xdvb-s2
Dreambox DM900, OpenViX 5.0, 2xdvb-s2, 2xdvb-c/t2
Terrestrial, Cable, Fixed 28.2e + Unicable2 LNB
When will feeds be updated Rossi?
Vix image (usually latest) - VU Solo 4K- WD 1TB INTERNAL HDD - DVB-T Freeview, trialling IPTV options
If my response has helped you, don't forget to hit the thanks button below. I appreciate you appreciate me
the feeds get updated when the next image update is available.
Vu Ultimo4K, OpenViX 5.0, 8xdvb-c, 8xdvb-s2, 2xdvb-t2
Vu Solo4K, OpenViX 5.0, 8xdvb-s2
Dreambox DM900, OpenViX 5.0, 2xdvb-s2, 2xdvb-c/t2
Terrestrial, Cable, Fixed 28.2e + Unicable2 LNB
latest build:-
FIXED lag *hopefully*
many screen tweaks/updates
add picon to movieselection and moviebar
remove some more pngs that arent used.
skinned linuxsataddons
there is a new converter required which is in the rar file. hopefully this will get added to the git.
installation:-
extract rar
delete old Red-HD folder from /usr/share/enigma2
transfer new Red-HD folder to /usr/share/enigma2
transfer MovieReference.py to /usr/lib/enigma2/python/Components/Converter/
restart e2
Vu Ultimo4K, OpenViX 5.0, 8xdvb-c, 8xdvb-s2, 2xdvb-t2
Vu Solo4K, OpenViX 5.0, 8xdvb-s2
Dreambox DM900, OpenViX 5.0, 2xdvb-s2, 2xdvb-c/t2
Terrestrial, Cable, Fixed 28.2e + Unicable2 LNB
barry2012 (22-06-14),bassethound (23-06-14),kiwiz (23-06-14),Menne.0201 (23-06-14),Sicilian (23-06-14)
Once pointer to the above.
One restarted Enigma 2, its best to check that MovieReference.pyo has been created and delete the MovieReference.py
Otherwise if MovieReference.pyo is updated in the and updates are online, you would constantly keep getting an old version of MovieReference.pyo being created.
D I S C L A I M E R
My right to post information is protected under the rights for freedom act. In all instances, information discussed here on my posts are either hypothetical in nature, out of general curiosity, common knowledge, public knowledge, or role-play. Any use of the collective descriptions and shared knowledge from any of my posts are at the sole discretion of the reader. I am not responsible for what you do with it!
Please help keep OpenViX online, donate HERE.
Rules can be found HERE
Support our sponsor World-Of-Satellite HERE
GIGABLUE UHD QUAD 4K, VU+ DUO 4K SE, ZGEMMA H7S, VU+ UNO 4K SE
Triax 1.1m Powered by TM2600, Fixed 28.2 Zone 2 dish with GT-SAT Unicable
Restarted Enigma 2 MovieReference.pyo was not created MovieReference.py was still present
VU+Duo2 5.2.025
This new converter may not be needed. Need to sort it when I get back in a couple days
It won't get updated as it's not part of vix. I think andy has made some more adjustments so we don't need it
Vu Ultimo4K, OpenViX 5.0, 8xdvb-c, 8xdvb-s2, 2xdvb-t2
Vu Solo4K, OpenViX 5.0, 8xdvb-s2
Dreambox DM900, OpenViX 5.0, 2xdvb-s2, 2xdvb-c/t2
Terrestrial, Cable, Fixed 28.2e + Unicable2 LNB
Speed issue seems to be sorted in the new build, is right lads.
rossi2000 (24-06-14)
Can MovieReference.py be deleted now if not required can confirm skin speed is spot on no more lagging well done
VU+Duo2 5.2.025
When I'm back I will confirm what's happening.
Vu Ultimo4K, OpenViX 5.0, 8xdvb-c, 8xdvb-s2, 2xdvb-t2
Vu Solo4K, OpenViX 5.0, 8xdvb-s2
Dreambox DM900, OpenViX 5.0, 2xdvb-s2, 2xdvb-c/t2
Terrestrial, Cable, Fixed 28.2e + Unicable2 LNB
Alanp (25-06-14)
latest build attached
please install this if your on the new build 12 of apollo
the new converter isnt required anymore, andy has made some changes :)
Vu Ultimo4K, OpenViX 5.0, 8xdvb-c, 8xdvb-s2, 2xdvb-t2
Vu Solo4K, OpenViX 5.0, 8xdvb-s2
Dreambox DM900, OpenViX 5.0, 2xdvb-s2, 2xdvb-c/t2
Terrestrial, Cable, Fixed 28.2e + Unicable2 LNB
Posting Permissions
Reply With Quote
