Flashing problem with openvix-Helios.001-vusolo2_usb.zip

[nsw9154]

OK, then I have really no idea.
Build 003 is about to be released, maybe give that a try.

just updated my Solo2 with the latest 03 from the boxes updates and my box has locked up, i have switched it off at the back 3 times and it still will not boot up

going to do a fresh install of Helios 01

[Rob van der Does]

just updated my Solo2 with the latest 03 from the boxes updates and my box has locked up, i have switched it off at the back 3 times and it still will not boot up

I have no idea why you highjack this thread and don't have the decency to create your own

Anyway: for that reason the feeds have been set to unstable.
And you can fix that issue by unzipping the attached file to
/usr/lib/enigma2/python/Screens

[Trial]

deleted as my post was garbage

[manufan1611]

Last suggestion, long shot but you never know:
disconnect everything; all USB (even the stick you use for flashing) and the internal HDD and the Ethernet connector.

YAY! success

With the HD disconnected the box has not crashed!

Thanks for your help Rob.

you mentioned build 003 helios - is this update only available through the box interface?

[Rob van der Does]

Good, at last.
Now I would reinitialize that HDD via a PC, then isntall it again and have it initialised by the box.

Yes, 003 is online, but there is an issue with it. See http://www.world-of-satellite.com/sh...l=1#post284271
If you're happy with your skills to fix that you can update.

[kiwiz1]

got the same problem, reflashed and now its working.

but still image needs some work.

also seen that when you update to build 03 you get frezee on bootscreen. wondering if that will be fixed when the next build be relase

[Larry-G]

got the same problem, reflashed and now its working.

but still image needs some work.

also seen that when you update to build 03 you get frezee on bootscreen. wondering if that will be fixed when the next build be relase

No idea why you must post the same thing over and over again, but for the third time, this was fixed in build 004 which is online now. as for the image needing work, please remember we do this for free, we are not paid to provide images.

[Rob van der Does]

but still image needs some work.

Enlighten us: what needs to be done

[nsw9154]

I have no idea why you highjack this thread and don't have the decency to create your own

i am sorry about that rob i did not do it on purpose

my power supply blew on my PC giving me the Blue screen of death and i was having trouble logging in to the site (only just got back on line properly)
and saw the heading about Flashing problem with Helios and did not read the full post as i thought it was the same problem that i was having and still am
even with Helios 04

sorry again for my miss post

regards norm

[manufan1611]

Good, at last.
Now I would reinitialize that HDD via a PC, then isntall it again and have it initialised by the box.

Yes, 003 is online, but there is an issue with it. See http://www.world-of-satellite.com/sh...l=1#post284271
If you're happy with your skills to fix that you can update.

Hi Rob,

Life has been busy so I will only re-attempt another update at the weekend.

You mentioned that I should reinitialize the hard drive via PC then again by the box before attempting upgrade.

I re-flashed my solo2 back to my other working image with the hard drive running. Can I initialize the HD now while its installed in solo2 by the solo2 before upgrading to latest image - would that do the job and prevent crash after upgrade?

thanks