Golden Interstar LX3

[rassi]

Bootloader 3.45, little faster boot, especially in the very beginning, display of percentage of booting process, other than these two obvious observations no clue what else is new.

You´re right, this is what i found as change log:

- Speed ​​up 9 seconds
- changed display text after power on

New drivers too, no clue what's new either.

There is? Could you point where to download?

You got to like mysteries and surprises if you own a Xpeed LX3...

This is so true

[gvsb]

Drivers came bundled with an openvix update not so long ago. If you have the latest vix you have the latest drivers. If you check menu>info>about you should see the latest drivers 08-10-2014. As for the changes?.?.?.

[rassi]

Mine haven´t updated, i do have Apollo 059 and drivers says "2014-08-29", but maybe it´s just text in the box info and drivers are up to date..?

Personally mostly waiting support for up to 6 tuners, so i could use 4 internal and two external USB-tuners with the box.

1_0_16_1B98_48_46_E080000_0_0_0.jpg

[gvsb]

Not sure, mine just appeared there after flashing not so long ago, maybe do a clean upgrade?

ImageUploadedByTapatalk1413632314.882807.jpg

[barry2012]

Yeah i was asking for info on the Technomate TM-Nano-3T COMBO
wanted to know can i use this on cable but sadely messages sent to world of satelite never got a reply
will wait as i got the tech-nano off them wanted an upgrade. hopefully save waiting
someone on here can help save waiting for a reply off W.O.S

[abu baniaz]

The TM Nano 3t combo has a single switchable tuner in addition to the twin sat tuners. You can use for cable or terrestrial.

[world-of-satellite.co.uk]

Yeah i was asking for info on the Technomate TM-Nano-3T COMBO
wanted to know can i use this on cable but sadely messages sent to world of satelite never got a reply
will wait as i got the tech-nano off them wanted an upgrade. hopefully save waiting
someone on here can help save waiting for a reply off W.O.S

Please re-send your email or drop us a pm here.

[rassi]

Not sure, mine just appeared there after flashing not so long ago, maybe do a clean upgrade?

ImageUploadedByTapatalk1413632314.882807.jpg

Checked from /lib/modules/3.14.2/extra
And it says 10.9.2014 and filesize 16718385

So, it seem that it haven´t updated for me. Need to find place where to download newest.

[rassi]

Am i alone with above issues:

1. Many times when trying to open record listing when recording is on, spinners comes and won´t go a away -> Box stuckd until power cycle or "reboot -f" -f needed otherwise it wont reboot.
2. Jumping with number buttons backwards do not work flawlessly when viewing recordings. Using default OpenViX durations for jumps. No issues when jumping forward.

Using SSD for timeshift and NAS via NFS for recordings.

Results for write throughput:
268.435 Mbit/s with udp,async,wsize=8192
268.435 Mbit/s with udp,async,wsize=32768
268.435 Mbit/s with udp,async,wsize=16384
214.748 Mbit/s with udp,async,wsize=4096

Results for read throughput:
1073.741 Mbit/s with udp,async,rsize=4096
357.913 Mbit/s with udp,async,rsize=8192
 with udp,async,rsize=32768
 with udp,async,rsize=16384

192.168.1.2:/mnt/data/ on /media type nfs (rw,relatime,vers=3,rsize=32768,wsize=32768,namlen=255,soft,nolock,proto=udp,timeo=11,retrans=3,sec=sys,mountaddr=192.168.1.2,mountvers=3,mountproto=udp,local_lock=all,addr=192.168.1.2)

Im really alone with this?

Tested again with fresh install and with NFS and Samba and same thing will happen, it´ll get stuck, spinners spin very often if i even open channel list
when recording, but almost everytime when I open recordins while recording.

Then tested with OpenATV, same setup and no issues at all with NFS.

[rassi]

Im really alone with this?

Tested again with fresh install and with NFS and Samba and same thing will happen, it´ll get stuck, spinners spin very often if i even open channel list
when recording, but almost everytime when I open recordins while recording.

Then tested with OpenATV, same setup and no issues at all with NFS.

Wuhuu, i´m not alone with this issue, but it seem to have nothing to do with the NFS/Samba after all
http://www.world-of-satellite.com/sh...grading-Apollo

[csm7djs]

I'll try and repo the issue on my LX3 tonight...

[akronim]

Golden Interstar LX3
OpenVix Apollo 088
skin: Magic HD Night

I've got a problem on my new GI LX-3 (OpenVix Apollo 088) with twin DVB-T tuner (Media-Tech Navigator Duo MT4168) which is USB dongle based on it9135. Both tuners are visible but both auto and manual scans show "scanning completed, 0 channels found".
I also have Vu+ Uno with the same image installed (Apollo 088) and there is no problem with this DVB-T dongle. Scanning is OK and both tuners can be used simultanuosly for recording two different DVB-T multiplexes. Linux kernel used in Vu+ Uno is 3.9.6.
Anyone can help?

[Rob van der Does]

Please read this thread HERE and create your own thread for your problem.

[rassi]

Golden Interstar LX3
OpenVix Apollo 088
skin: Magic HD Night

I've got a problem on my new GI LX-3 (OpenVix Apollo 088) with twin DVB-T tuner (Media-Tech Navigator Duo MT4168) which is USB dongle based on it9135. Both tuners are visible but both auto and manual scans show "scanning completed, 0 channels found".
I also have Vu+ Uno with the same image installed (Apollo 088) and there is no problem with this DVB-T dongle. Scanning is OK and both tuners can be used simultanuosly for recording two different DVB-T multiplexes. Linux kernel used in Vu+ Uno is 3.9.6.
Anyone can help?

Just curious, how many internal tuners you do have in your LX3?
Havent tested lately, but in the begining USB tuners didnt came visible when 4 internal tuners were in use. It was 4 tuners max with the LX3, hopefully it´s fixed and i could utilize my Sundtek sticks again.

PS. Have you tried to copy terrestial.xml from Vu+ uno to Lx3 and tested scan again?
Or just use DreamboxEdit and take channel lists from Uno to LX3

[abu baniaz]

There was a limitation of 4 tuners within E2. That has been increased to 8.