region problem with AutoBouquetMaker

[Ojustaboo]

Hi all, probably me being stupid.

Using ViX on a Quad.

All I want is Freesat channels and I want the Anglia region.

Under Crossepg OpenTV providers, I have selected "Sky UK Open TV (Astra 2 on 28.2")

Under Service searching / AutoBouquetMaker I have it set as follows

CONFIGURE:
Setup mode: Expert
Scheduled Scan: yes
Time of scan to start: 01:00
Repeat how often: Daily
Keep all bouquets: no
Add provider prefix to bouquets: no
Place bouquets at: Top
Show in extensions: no

I presume by scanning daily, it will pick up any channels that have changed before my lovely wife moans that she cant find them

PROVIDERS:
Everything is set to "no" except the following

Freesat: yes
Freesat area: England HD - East (E) / Anglia E
Freesat generate main bouquet: yes
Freesat generate sections bouquet: yes
Freesat generate HD bouquet: yes
Freesat generate FTA bouquet: yes

However if I go into the epg (graphical or the one using the up/down cursor keys) it shows channel 101 as BBC 1 London instead of BBC 1 East

I've played around with this for months, occasionally after rebooting it does change 101 to East, but a few days later it will revert to London again.

Not a big deal of course, but would be nice to sort out.

On the same lines, the epg always seems 100% correct in the evening, however often it goes weird during the morning. For example an hour ago it was correctly telling me that "More 4 +1" had a film on called "desert Fox" however, even though this was also showing on "More 4", "more 4 "had "Father Ted" listed.

Many thanks

[abu baniaz]

Best to have separate threads for separate issues.

I have tested with a TM Nano on Zeus 007 and can confirm your issue. A bug report will be raised for the ABM issue.

section from debug log

action ->  SetupActions save
unknown action SetupActions/save! typo in keymap?
KEY: 399 GREEN
action ->  ColorActions green
[AutoBouquetsMaker] AutoBouquetsMaker Schedule Disabled at Fri 21 Mar 2014 15:39:52 GMT
[ePNG] couldn't open /usr/share/enigma2/skin_default/autobouquetsmaker/configure.png
[ePNG] couldn't open /usr/share/enigma2/skin_default/autobouquetsmaker/opentv.png
[ePNG] couldn't open /usr/share/enigma2/skin_default/autobouquetsmaker/reorder.png
[ePNG] couldn't open /usr/share/enigma2/skin_default/autobouquetsmaker/download.png
[ePNG] couldn't open /usr/share/enigma2/skin_default/autobouquetsmaker/dbinfo.png
[ePNG] couldn't open /usr/share/enigma2/skin_default/autobouquetsmaker/about.png
KEY: 108 DOWN
KEY: 108 DOWN
KEY: 108 DOWN
KEY: 108 DOWN
KEY: 352 OK
action ->  SetupActions ok
[SKIN] Parsing embedded skin <embedded-in-'AutoBouquetsMaker'>
KEY: 352 OK
[Manager] Loading settings...
[BouquetsReader] Reading lamedb...
[BouquetsReader] Read 0 transponders and 0 services
[Manager] Done
[AutoBouquetsMaker] Search NIM for orbital position 282
opening frontend 0
[AutoBouquetsMaker] Nim found on slot id 0 with sat 28.2E Eutelsat 28A & Astra 2A/2E/2F
allocate demux
(0)tune
RotorCmd ffffffff, lastRotorCmd ffffffff
prepare_sat System 0 Freq 12207000 Pol 1 SR 27500000 INV 2 FEC 2 orbpos 282 system 0 modulation 1 pilot 2, rolloff 0
tuning to 1607 mhz
OURSTATE: tuning
[SEC] set static current limiting
[SEC] invalidate current switch params
[SEC] setVoltage 1
[AutoBouquetsMaker] TUNING
[SEC] sleep 10ms
[SEC] setTone 1
[SEC] sleep 10ms
[SEC] update current switch params
[SEC] startTuneTimeout 5000
[SEC] setFrontend 1
setting frontend 0
(0)fe event: status 0, inversion off, m_tuning 1
(0)fe event: status 19, inversion off, m_tuning 2
OURSTATE: ok
[SEC] sleep 500ms
[AutoBouquetsMaker] ACQUIRING TSID/ONID
[Manager] Reading freesat (freesat_110_13)...
[DvbScanner] Adapter 0
[DvbScanner] Demuxer 0
[DvbScanner] Frontend 0
[DvbScanner] DVBType dvbs
[DvbScanner] NIT pid: 0x10
[DvbScanner] NIT current table id: 0x40
[DvbScanner] NIT other table id: 0x41
[DvbScanner] SDT pid: 0x11
[DvbScanner] SDT current table id: 0x42
[DvbScanner] SDT other table id: 0x46
[DvbScanner] BAT pid: 0xf01
[DvbScanner] BAT table id: 0x4a
[DvbScanner] Reading transponders...
main thread is non-idle! display spinner!
[DvbScanner] Added/Updated 80 transponders with network_id = 0x20
[DvbScanner] Reading services...
[DvbScanner] Read 211 services with bouquet_id = 0x110
[DvbScanner] Reading services extra info...
[DvbScanner] Read extra info for 200 services
[Manager] Done
[SEC] set dynamic current limiting
[Manager] Saving... to keep: ['userbouquet.favourites.tv']
[Manager] Radio bouque
[Manager] Bouquets to hide: {}
[Manager] TV bouquetsts to keep: ['userbouquet.favourites.radio']
[Manager] Add provider prefix to bouqets: False
[BouquetsWriter] Writing lamedb...
[BouquetsWriter] Wrote 80 transponders and 200 services
main thread is non-idle! display spinner!
[BouquetsWriter] Writing freesat bouquet...
[BouquetsWriter] Done
[BouquetsWriter] Writing bouquets index...
[BouquetsWriter] Done
[Manager] Done

Thanks for reporting.

Thread moved to image support section.

[abu baniaz]

@Ojustaboo
Are you still having this issue?

Just tried it again, but can't reproduce the issue.

[Ojustaboo]

Yes, but it's random.

Yesterday 101 was BBC London, today it's correctly BBC East.

It's not a big problem, only when I want to watch local news. I only record off BBC HD anyway, and those few times I do want to watch local news, if it's not 101, I just scroll down and find it where all the other BBC one region channels are.,

I altered the auto scan to 6:30 am a few weekss ago to see if that helped as usually if I run a manual scan it fixes the problem for that day (but not always), hence thought maybe a later auto update might help but but it didn't

[Ojustaboo]

This morning it has reverted to BBC London (using Apollo 15 but has done it for months)

Here's the Cursor up/down EPG before I did a Autobouquetmaker scan

Before_zps5148aaf7.jpg



Here's the Graphical EPG before I did the scan

Before1_zpse71b9971.jpg



Here's the scan in progress (I know it says 0 found that's because it only finds things in the last bit, it did find them all)

Auobouquetmakerscan_zpsd7d09d16.jpg



Hers the Graphical EPG after the scan now correctly showing BBC East

After1_zps73c68d90.jpg



Here's the up / down cursor epg wrongly showing BBC London after the scan

after2_zpsc321628e.jpg


I pressed "Provider" (Yellow button) on the up / down EPG and had one option, BSKYB, I selected that, I then clicked on "Favourites" (Blue Button" and selected "All Channel;s"
and it now correctly shows East. I didn't do this combination for any particular reason, just pressed a few buttons to try and get it to fix it's self as the cursor up/down EPG seems to need some sort of refresh after the graphical EPG is correct.



Now correct

after3_zps71464bac.jpg


And it's 50/50 whether it will still be correct tomorrow or it will revert to London and I have to do the same as today. As I said in my previous post, yesterday it correctly showed BBC East, today for no reason it didn't.



Here's my Autobouquet provider screen

Autobouquetprovider_zps5183fa04.jpg



Here's my Autobouquet setup screen

20140714_103008_zps82420782.jpg

[abu baniaz]

You can grab screenshots using the following address on your browser. Change IP to match your receiver.

http://192.168.x.xx/grab?format=jpg

I'll re-open the bug report, would you mind enabling debug logs. Upload them here after a "failed run"

[Ojustaboo]

Todays the first time it's done it since my previous post.


1_0_1_2078_7FA_2_11A0000_0_0_0.jpg

Debug list attached as requested.

Note: I tried to view the log on the Quad in the Log manager screen, pressing green to view, and it rebooted, which I suspect is the "Segmentation fault" that's the last entry in the log.

I just rebooted the box

After rebooting box.jpg

Then ran the autobouquet scan

Autobouquet scan in progress.jpg

And this time, after the scan it still says BBCLondon

After autobouquet scan.jpg

And as you can see it's correctly set in Autobouquets settings

settigs.jpg

This has happened numerous times in the past, it reverts to BBCLondon and for a while wont change back, it could be that I run the Autobouquet scan in a couple of hrs and it will fix it's self. or could be a couple of days before a manual scan sorts it's self out. I've had it stay on BBCLondon for days in the past even though it auto scans every morning.

setup.jpg

I've attached the original debug log and the one since the reboot just now.

[Ojustaboo]

This mornings 6 am scheduled scan didn't fix it

before scan.jpg

However I just ran autobouquet scan and it has fixed it. Weird

after scan.jpg

[Peterj]

Can you download (ftp) from your box and post lamedb and autobouquets.....main.tv (zip them both) from \etc\enigma2 in both situations?
Then we can compare what is different.

[Ojustaboo]

Did it again today. Again sometime it can go days and be fine

London.jpg

East.jpg

I ftp's the files yesterday into a folder called "Working correct Thursday"
I ftp'd the files today when it had reverted to London (after the 6am scheduled scan) into a folder called "Not working Friday morning"
I then ran the autobouquet scan which fixed it and ftp'd the files into a directory called "Working correctly Friday after just doing a scan"

[Peterj]

I see it puts the wrong service in line 204 of the autobouquet.sat_freesat.main.tv file.
204: #SERVICE 1:0:1:189d:7fd:2:11a0000:0:0:0: (= BBC One Lon) wrong.
204: #SERVICE 1:0:1:2842:7fe:2:11a0000:0:0:0: (= BBC One East E) correct.
The rest seems to be ok.
The only thing I can think of, is that the wrong LCN is read from the stream at that moment.
We need to make a debug mod in ABM to see what is happening when ABM is reading the streams.
We let you know what's next.

[Peterj]

Copy bouquetswriter.py to /usr/lib/enigma2/python/Plugins/SystemPlugins/AutoBouquetsMaker/scanner
rename the bouquetswriter.pyo (So you can put it back later).
Restart enigma2. (the py will be compiled to a pyo)

After an ABM scan it creates 4 abm..... .log files in /tmp.
Can you post me a set when scan was ok and a set when scan was wrong?

[Ojustaboo]

It was fine today, I looked in /tmp and those files weren't there.

So I tried a manual Autobouquet scan and it causes Enigma2 to restart now, I've tried it a couple of times.

Looking at the crash and debug logs, new ones were created just after the autoscan kicked off the last two mornings, so I don't thik it's scanned at all.

some (latest) debug and all crashlogs attached

[Peterj]

Please try this one.
Are you up te date with image?

[Ojustaboo]

I should be up to date , I updated very recently. Tried updating and it says feeds are down for maintenance.

here's the info page


1_0_1_22D9_80D_2_11A0000_0_0_0.jpg

New version works fine, just run the scan, correctly saying BBC East, 4 files created in /tmp which I've copied across. Will upload them when it next fails.

many thanks for all your halp