Motorised setup for second Quad

[stuffyouguys]

Assuming that there is a direct connection to tuner A, this should be set as simple single, 28.2.
If you want to test the switch, park the motor on a satellite that is not the same as the fixed ones. Then set the tuners as diseqc a/b/c/d to correspond.
If you setup email address on the log settings, that would show up. Zip the settings file upload and I'll have a look for you.

ok here's the settings file...please see want you can make of it. ill try the switch thing tomorrow as the wife wants to watch the tv now. cheers

config.timeshift.favoriteSaveAction=noSave
config.timeshift.startdelay=2
config.misc.lastrotorposition=282
config.misc.firstrun=false
config.misc.restorewizardrun=true
config.misc.startCounter=21
config.misc.languageselected=false
config.misc.initialchannelselection=false
config.misc.epgcachepath=/media/hdd/
config.misc.isNextRecordTimerAfterEventActionAuto= true
config.misc.videowizardenabled=false
config.radio.lastroot=1:7:1:0:0:0:0:0:0:0:FROM BOUQUET "bouquets.radio" ORDER BY bouquet;
config.radio.lastservice=1:7:1:0:0:0:0:0:0:0:FROM BOUQUET "autobouquet.skyuk.main.radio" ORDER BY bouquet
config.pluginbrowser.src=true
config.pluginbrowser.po=true
config.tv.lastroot=1:7:1:0:0:0:0:0:0:0:FROM BOUQUET "bouquets.tv" ORDER BY bouquet;1:7:1:0:0:0:0:0:0:0:FROM BOUQUET "autobouquet.skyuk.main.tv" ORDER BY bouquet;
config.tv.lastservice=1:0:19:5208:812:2:11A0000:0: 0:0:
config.usage.hdd_standby=600
config.usage.serviceitems_per_page=20
config.usage.pip_zero_button=stop
config.plugins.VFD_Giga.ledRUN=0
config.plugins.VFD_Giga.ledREC=2
config.plugins.VFD_Giga.ledSBY=0
config.plugins.autotimer.show_help=false
config.plugins.xmltvimport.sources=Rytec Benelux XMLTV|Rytec Bulgaria XMLTV|Rytec Denmark XMLTV|Rytec Erotic XMLTV|Rytec Finland XMLTV|Rytec France XMLTV|Rytec Germany/Austria/Swiss XMLTV|Rytec Greece in English XMLTV|Rytec Hungary XMLTV|Rytec Israel XMLTV|Rytec Italy XMLTV|Rytec Norway XMLTV|Rytec TVBS/OSN/JSC Sport XMLTV|Rytec Poland XMLTV|Rytec Portugal XMLTV|Rytec Romania XMLTV|Rytec Serbia/Croatia/Montenegro XMLTV|Rytec Slovak/Czech XMLTV|Rytec Slovenia XMLTV|Rytec Spain XMLTV|Rytec Sweden XMLTV|Rytec Turkey XMLTV|Rytec UK XMLTV|Rytec UK BBCi XMLTV
config.plugins.xmltvimport.longDescDays=5
config.plugins.xmltvimport.enabled=true
config.plugins.xmltvimport.wakeup=5:0
config.autobouquetsmaker.hidesections=|skyuk:580|s kyuk:640|skyuk:700|skyuk:780|skyuk:861|skyuk:881|s kyuk:889|skyuk:899|skyuk:950|skyuk:1030
config.autobouquetsmaker.level=expert
config.autobouquetsmaker.providers=canaldigitaal_h d_astra_1::1:
config.epgselection.graph_prevtimeperiod=90
config.epgselection.multi_showbouquet=true
config.epgselection.graph_showbouquet=true
config.ondemand.ShowRTEPlayer=false
config.ondemand.ShowiViewPlayer=false
config.ondemand.ShowiRadioPlayer=false
config.ondemand.ShowMainMenu=true
config.ondemand.Show3Player=false
config.skin.primary_skin=skin.xml
config.skin.display_skin=AAF_LCDSkin_2/skin_display.xml
config.backupmanager.backupdirs=['/etc/enigma2/', '/etc/fstab', '/etc/hostname', '/etc/network/interfaces', '/etc/passwd', '/etc/shadow', '/etc/etc/shadow', '/etc/resolv.conf', '/etc/ushare.conf', '/etc/inadyn.conf', '/etc/tuxbox/config/', '/etc/wpa_supplicant.conf', '/usr/softcams/', '/etc/CCcam.cfg', '/etc/CCcam.channelinfo', '/etc/CCcam.providers', '/etc/wpa_supplicant.wlan0.conf', '/usr/crossepg/crossepg.config', '/usr/crossepg/providers', '/etc/samba']
config.av.downmix_aac=false
config.av.surround_3d=hdmi
config.av.policy_169=scale
config.av.pip=519,0,194,154
config.av.videorate.1080p=multi
config.av.videorate.1080i=multi
config.av.downmix_ac3=false
config.av.videomode.HDMI=1080i
config.Nims.1.simpleSingleSendDiSEqC=true
config.Nims.1.diseqcA=282
config.Nims.1.simpleDiSEqCOnlyOnSatChange=true
config.Nims.1.diseqcB=282
config.Nims.1.configMode=advanced
config.Nims.1.advanced.sats=90
config.Nims.1.advanced.sat.130.lnb=2
config.Nims.1.advanced.sat.282.lnb=2
config.Nims.1.advanced.sat.192.lnb=2
config.Nims.1.advanced.sat.3602.lnb=34
config.Nims.1.advanced.sat.90.lnb=2
config.Nims.1.advanced.sat.235.lnb=2
config.Nims.1.advanced.lnb.1.diseqcMode=1_2
config.Nims.1.advanced.lnb.1.powerMeasurement=fals e
config.Nims.1.advanced.lnb.1.latitude=54.610
config.Nims.1.advanced.lnb.1.longitudeOrientation= west
config.Nims.1.advanced.lnb.1.longitude=1.312
config.Nims.1.advanced.lnb.1.commitedDiseqcCommand =AB
config.Nims.1.advanced.lnb.33.powerMeasurement=fal se
config.Nims.1.advanced.lnb.2.diseqcMode=1_2
config.Nims.1.advanced.lnb.2.powerMeasurement=fals e
config.Nims.1.advanced.lnb.2.latitude=54.610
config.Nims.1.advanced.lnb.2.longitudeOrientation= west
config.Nims.1.advanced.lnb.2.longitude=1.312
config.Nims.1.advanced.lnb.2.commitedDiseqcCommand =AB
config.Nims.1.advanced.lnb.36.powerMeasurement=fal se
config.Nims.1.advanced.lnb.34.powerMeasurement=fal se
config.Nims.0.simpleSingleSendDiSEqC=true
config.Nims.0.advanced.sats=282
config.Nims.0.advanced.sat.130.lnb=1
config.Nims.0.advanced.sat.282.lnb=1
config.Nims.0.advanced.sat.192.lnb=1
config.Nims.0.advanced.sat.3603.lnb=35
config.Nims.0.advanced.sat.3602.lnb=34
config.Nims.0.advanced.sat.3601.lnb=33
config.Nims.0.advanced.sat.3604.lnb=36
config.Nims.0.advanced.sat.90.lnb=1
config.Nims.0.advanced.sat.235.lnb=1
config.Nims.0.advanced.lnb.33.powerMeasurement=fal se
config.Nims.0.advanced.lnb.36.powerMeasurement=fal se
config.Nims.0.advanced.lnb.36.commitedDiseqcComman d=AB
config.Nims.0.advanced.lnb.36.longitudeOrientation =west
config.Nims.0.advanced.lnb.35.powerMeasurement=fal se
config.Nims.0.advanced.lnb.34.powerMeasurement=fal se
config.Nims.0.advanced.lnb.1.diseqcMode=1_0
config.Nims.0.advanced.lnb.1.powerMeasurement=fals e
config.Nims.0.advanced.lnb.1.latitude=54.610
config.Nims.0.advanced.lnb.1.longitudeOrientation= west
config.Nims.0.advanced.lnb.1.longitude=1.312
config.Nims.0.advanced.lnb.1.commitedDiseqcCommand =AA
config.Nims.0.advanced.lnb.2.diseqcMode=1_0
config.Nims.0.advanced.lnb.2.powerMeasurement=fals e
config.Nims.0.advanced.lnb.2.commitedDiseqcCommand =AA
config.Nims.0.latitude=54.610
config.Nims.0.diseqcA=282
config.Nims.0.longitude=1.312
config.Nims.0.longitudeOrientation=west
config.Nims.3.terrestrial=4
config.Nims.3.multiType=1
config.Nims.2.terrestrial=4
config.Nims.2.multiType=1
config.softcammanager.softcams_autostart=['/usr/softcams/CCcam.2.0.11']
config.epg.histminutes=15
config.epg.cachesavesched=true
config.epg.cacheloadsched=true
config.audio.volume=55

[abu baniaz]

Not sure why you have set the static one as advanced. It should be simple, single, 28.2.

With reference to the switch iteself, not settings programmed in receiver, which port is the motorised one in please?

[stuffyouguys]

Not sure why you have set the static one as advanced. It should be simple, single, 28.2.

With reference to the switch iteself, not settings programmed in receiver, which port is the motorised one in please?

on the switch itself i have (LNB1 receiver LNB2). i believe the answer you want is LNB2 on the switch
but to be sure here's my setup.
i have 2 sat tuners in my receiver. tuner A goes start to the static dish. tuner B goes to motor. then from motor to (receiver) on the switch. 2nd feed from static dish goes to LNB1. then feed from LNB on motor dish to LNB2 on switch.
cheers

[stuffyouguys]

have got this working now. i stupidly had 28.2e setup on the motorised dish using the same LNB and switch channel.
i now have tuner A setup as simple single sat. tuner B as advanced 13e, 19.2e setup using LNB2 switch AB diseqc 1.2 and 28.2 setup as LNB1 switch AA diseqc 1.0

thanks for all your help.

[abu baniaz]

Good to hear. Is motor moving to the other sats?

[stuffyouguys]

Good to hear. Is motor moving to the other sats?

got me worried there but yes works on other sats too. brill

[stuffyouguys]

Good to hear. Is motor moving to the other sats?

yes motor dish working great, thanks for all help.