fresh flash problem

[drx360]

Hi guys but of a strange problem here, loaded new vix build (806)on to usb to reflash my box as having issues with it not seeing network mounts, so plugged in usb rebooted( i have flashed my box many times before with no issues) but i dont see the message anymore to press ok? it just goes straight to trying to rebooting up? any ideas? cheers

my current build is 796

[craig37]

Can't you use image manage to up load new image ?

[Jigsy99]

I had a similar issue when I used a new usb stick the receiver just wouldn't recognise it. I went back to my old usb2 stick and all was well again.

Sent from my GT-I9505 using Tapatalk

[drx360]

I had a similar issue when I used a new usb stick the receiver just wouldn't recognise it. I went back to my old usb2 stick and all was well again.

Sent from my GT-I9505 using Tapatalk

This is the same usb ive used for past 18 months or so, i use it to store epg on, so i dont understand why it dosnt see it for flashing an image.

[drx360]

just tried another usb stick and still it just goes straight to booting, any ideas?

[judge]

Have you the correct folder & file structure on the USB stick?

[drx360]

yes mate. have flashed it lots of times before, now it wont show the message that its found an update.

[drx360]

ok given up on usb re-flash i have no idea why it wont work anymore, had to do it via online.

[Rob van der Does]

1- Make sure no other USB-ports are in use
2- Try other USB-port
3- If in the end nothing works, you can also flash via ImageManager.

[Sicilian]

Try the following:

1) Max Size 8GB USB stick.
2) User REAR USB port.
3) Format your USB stick FAT32 using this tool here http://www.world-of-satellite.com/sh...ve-Format-Tool

If the above doesn't work try with a GENUINE Kingston USB stick Formatted with the above HP Tool.