Your Sky Italia card is obviously an 09cd ..
0919 cards are not effected ..
Its a waiting game now for oscam to find the fix for this..
Your Sky Italia card is obviously an 09cd ..
0919 cards are not effected ..
Its a waiting game now for oscam to find the fix for this..
Hi,
I had a look on my oscam.server configuration file and the card is a 093b (the serial printed on the card starts with 0002).
Maybe this version is between the 0919 and the 09cd ... I don't know.
Just for my understanding (and curiosity): what's the difference between the card versions ? Why the 0919 still works and not the 093b/09cd ?
Of course I'll do it !
I'll download from the VIX images the last version but ... no idea on how to configure it (I suppose there is a file such as the "oscam.server" for OScam for the parameters).
Do you have any suggestion for the very basic settings ? Sorry to bother, but I'm the king of newbie
Hi, I just tried the CCcam (v 2.3.0) with the settings below:
B: /dev/sci0 07
#
SERVER LISTEN PORT: 12000
ALLOW WEBINFO: yes
WEBINFO USERNAME: <my user>
WEBINFO PASSWORD: <my pwd>
WEBINFO LISTEN PORT: 16001
#
DISABLE EMM: yes
SHOW TIMING: yes
EMM THREADS : 4
EXTRA EMM LEVEL: no
SOFTKEY FILE: /var/keys/SoftCam.Key
AUTOROLL FILE: /var/keys/AutoRoll.Key
STATIC CW FILE: /var/keys/constant.cw
CAID PRIO FILE: /var/etc/CCcam.prio
PROVIDERINFO FILE: /var/etc/CCcam.providers
CHANNELINFO FILE: /var/etc/CCcam.channelinfo
#
CARD READER: /dev/sci0
SMARTCARD CLOCK FREQUENCY: /dev/sci0 3570000
BOXKEY: /dev/sci0 <the HEX value of my s*ybox serial number>
#AU = yes
#
#CARD READER: /dev/sci1
#BOXKEY: /dev/sci1 0B XX XX XX
#AU = yes
#
Also in this case I can see the channels in SD, but not the HD ones (same result as OScam).
I don't think this may depend on the settings I made, but any suggestion is very welcome.
Ciao !
just two silly question: did you put the cccam.cfg in the correct path?it should lay in /etc.
Beside this, have you tried updating your channel settings?
3 x VU+ DUO+Internal WD Caviar Blu 500GB+Magic-HD-Noire+CCcam2.3.0
Hi, yes the config file is in /etc; CCcam starts properly.
I updated also the settings; the fact is all the HD channels have been replaced by the same in SD because probably this is general issue in Italy; I think s*y Italia introduced new ways to lock cards if used with "unofficial" decoders. If I use my card into the s*ybox all it's fine.
Actually I'v not understood what you mean.
Anyway, I'm using my official card with an official subscription for Italy and I'm watching all the HD channels without any problem. Tested on all my Vu+DUO. With two different official cards.
Maybe there's some offending line in your cccam.cfg (mine is really clean!)
Try disabling these (red disable blue leave it as is)
B: /dev/sci0 07
#
SERVER LISTEN PORT: 12000
ALLOW WEBINFO: yes
WEBINFO USERNAME: <my user>
WEBINFO PASSWORD: <my pwd>
WEBINFO LISTEN PORT: 16001
#
DISABLE EMM: yes
SHOW TIMING: yes
EMM THREADS : 4
EXTRA EMM LEVEL: no
SOFTKEY FILE: /var/keys/SoftCam.Key
AUTOROLL FILE: /var/keys/AutoRoll.Key
STATIC CW FILE: /var/keys/constant.cw
CAID PRIO FILE: /var/etc/CCcam.prio
PROVIDERINFO FILE: /var/etc/CCcam.providers
CHANNELINFO FILE: /var/etc/CCcam.channelinfo
#
CARD READER: /dev/sci0
SMARTCARD CLOCK FREQUENCY: /dev/sci0 3570000
BOXKEY: /dev/sci0 <the HEX value of my s*ybox serial number>
#AU = yes
#
#CARD READER: /dev/sci1
#BOXKEY: /dev/sci1 0B XX XX XX
#AU = yes
#
just leave C: and F: lines if you have any
3 x VU+ DUO+Internal WD Caviar Blu 500GB+Magic-HD-Noire+CCcam2.3.0
As has already been said in another thread..
Maybe Mars Atris card is 0919 caid.. These are totally un-effected for the moment..
Stema.. Your card is prolly an 09cd.. and is effected.. Only SD channels viewable on these cards for the for-see-able future..
I know of quite a few 0919 cards that are still working on HD.. I dont know of any 09cd still working..
Ahh.. ok.. All the ones that i know of are all run in oscam..