I got Technomate 800Hd today.
made folder on usb.
TM800_update.bin
turned on receiver held powerbutton until mini root came on.
Box ip came up loaded usb hit menu button
And its not downloading image
Help
I got Technomate 800Hd today.
made folder on usb.
TM800_update.bin
turned on receiver held powerbutton until mini root came on.
Box ip came up loaded usb hit menu button
And its not downloading image
Help
Don't quite follow?
Anyway; the easy way:
download the image of your choice from http://download.for-better.biz/bbs/l...?board=tm800hd,
copy it to the root of the USB stick and then rename it TM800_update.bin,
Power-off TM800 at the back,
Power-on and
start pressing the "Standby" on the front panel quickly, until
"Miniroot" appears
Plug the USB stick into the TM800's front USB
wait a minute...
Press "Menu"
image flash should start and display progress in the panel display
Southern hemisphere, LNB1: 68.5E, LNB2: 15.8E, LNB3: 36.0E, 2x 4way Diseqc switches
Dsq1: TM9100 (DS4.4 20100922) loopback to "Victory" (FTA receiver)
Dsq2: TM800HD (UR1.0 20101028 Beta)
Thanks mate for ur reply.
I have done all of the above and image will not load.
Help
When it goes to miniroot and i wait a minute and load usb instead of loading Fail -2 appears.
First you plug the USB stick in,
THEN you wait a minute for the box to recognise the device and read the file structure,
THEN you press the "menu"...
Southern hemisphere, LNB1: 68.5E, LNB2: 15.8E, LNB3: 36.0E, 2x 4way Diseqc switches
Dsq1: TM9100 (DS4.4 20100922) loopback to "Victory" (FTA receiver)
Dsq2: TM800HD (UR1.0 20101028 Beta)
did that mate
I don't know what you did, but that's certainly not what you wrote.
Anyway, if that doesn't work, the other option is to connect the to box using the browser from your PC when the box displays the "miniroot" in the display.
Then you can download and flash the image using the "miniweb" interface, all from the PC
Southern hemisphere, LNB1: 68.5E, LNB2: 15.8E, LNB3: 36.0E, 2x 4way Diseqc switches
Dsq1: TM9100 (DS4.4 20100922) loopback to "Victory" (FTA receiver)
Dsq2: TM800HD (UR1.0 20101028 Beta)
Mate, at this stage i dont know what i did :-(.
spent all day at it.I could f*ck it out the window.
how do i do it through pc.
Thanks mate for your help
file must be wrong in some way but cant see how
Try another USB stick, but format it FAT32 first. Had a similar issue myself.
Other option is use the webif to flash the new image.
D I S C L A I M E R
My right to post information is protected under the rights for freedom act. In all instances, information discussed here on my posts are either hypothetical in nature, out of general curiosity, common knowledge, public knowledge, or role-play. Any use of the collective descriptions and shared knowledge from any of my posts are at the sole discretion of the reader. I am not responsible for what you do with it!
Please help keep OpenViX online, donate HERE.
Rules can be found HERE
Support our sponsor World-Of-Satellite HERE
GIGABLUE UHD QUAD 4K, VU+ DUO 4K SE, ZGEMMA H7S, VU+ UNO 4K SE
Triax 1.1m Powered by TM2600, Fixed 28.2 Zone 2 dish with GT-SAT Unicable
Thanks Boss,
I got it working through the miniroot.
still cant figure out why it wouldnt work through usb.
I'm bit dissapointed in quaility of picture, Spiderbox 9000Hd is much better.
Build quaility is bit cheap.
I was supposed to be upgrading my second box, but prefer Spiderbox.
Thanks again guys for your help
Try a different USB stick, I had the same issue too once. I personally think the build quality is very good.
D I S C L A I M E R
My right to post information is protected under the rights for freedom act. In all instances, information discussed here on my posts are either hypothetical in nature, out of general curiosity, common knowledge, public knowledge, or role-play. Any use of the collective descriptions and shared knowledge from any of my posts are at the sole discretion of the reader. I am not responsible for what you do with it!
Please help keep OpenViX online, donate HERE.
Rules can be found HERE
Support our sponsor World-Of-Satellite HERE
GIGABLUE UHD QUAD 4K, VU+ DUO 4K SE, ZGEMMA H7S, VU+ UNO 4K SE
Triax 1.1m Powered by TM2600, Fixed 28.2 Zone 2 dish with GT-SAT Unicable
Ok, I think when you start you must put your USB stick in the back (front port is NOT reconised on my TM for Image usb boot).
Make sure your file is named TM800_update.bin (and not in a directory, just put file on stick no folders).
Then start your STB from back and keep pressing standby slowly 1 press per 500ms then when the VFD says MINIROOT wait till the desplay say`s 192.168.*.* then press MENU and bingo the file will load.
Hope this helps.
Last edited by reddishd; 03-11-10 at 03:58.
Technomate TM-800HD Beta tester. TM 6900 HD, TM5400CI+ super, ClearOS servers, smargo+ x5,Spiderbox 9000hd, spiderbox 5000sd, Openbox s9HD, Sky HD multiroom full sub.
Dishes, Main dish is 1.2m Triax, 1.1m prime focus, 80cm moterised, & zone2 sky dish.
Cams and cards are, Diablo 2.3 & diblo wifi, Dragoncam v2, Gamma,Titanium 1,2, Canal digital,DigitALB, JSC 1-10, Nova Gr, many ice scrapers & old cams.
Loads of other satellite kit.
Satellite ark is 45w - 36e.
Sorry Red, but that about rear vs. front USB is not true. It mounts and works perfectly from the front, for me and everybody else that I know.
What you should do to ensure that USB is recognised is to only plug it in once you have displayed the Miniroot, and give TM a minute to scan the device and folders. That' all. Never failed.
Southern hemisphere, LNB1: 68.5E, LNB2: 15.8E, LNB3: 36.0E, 2x 4way Diseqc switches
Dsq1: TM9100 (DS4.4 20100922) loopback to "Victory" (FTA receiver)
Dsq2: TM800HD (UR1.0 20101028 Beta)
Thanks reddishd and fdlsys.
I got it working through miniroot and flashfxp.
Reddishd i take on board what u said about no making a folder. I think that is where i went wrong.
it was the file that i should have renamed not the folder.
Thanks