Crossepg hangs on reading titles - help please

[The Lambton Worm]

And as said above: no log = no fix.

I can't post one if there isn't one created by ViX.

[Rob van der Does]

You can activate debuglogs at any time. If you have debuglogs de-activated, they will indeed not be produced.

[The Lambton Worm]

OK I'll check that tonight when I get in from work (I normally have it switched on). If it isn't on I'll give it a whirl and see what happens.

[Rob van der Does]

Don't forget to reboot the box once debuglogs have been activated (otherwise you still get no log).

[sunday96]

The epg problem has been fixed by upgrading to 776 for most of the boxes but not for ET9200. I have a ET9200 and will to get a log of the failure. Does anyone know how to enable the log and the log location please?

I assume it's the one in /var/log/messages?

Thanks

Sent from my GT-I9505 using Tapatalk

[judge]

Menu -> Setup -> System -> Logs -> Settings -> Enable debug log = yes.
Restart E2 & try to download the EPG.
The debug log will be in /home/root/logs/ by default.

[The Lambton Worm]

This the only log that's there.

Enigma2-07-11-2013_19-21-10.log

[Rob van der Does]

I can't see anything wrong.
Maybe somebody else?

[dude1]

Sorry not been back with more information on the epg but I ended up with another problem of the flash memory filling up that took me tonight to sort out see here

I'll give the newer build a try as soon as I get chance as didn't know there was a 776 available now.

Thanks.

[manikm]

i cant get a log either.

im staying away for now, with an old image until this is well and truely nailed, nothing wrong with old EPG method to be honest - taking up too much time

shouldnt u pull 775 until you get a better and more positive response.

how many happy 775+ users are there>???

[judge]

This the only log that's there.

Enigma2-07-11-2013_19-21-10.log

I can't see anything wrong.
Maybe somebody else?

There seems to be a lot of:

Entry for 28,2? not in Rotor Table found... i try gotoXX?
siteLatitude = 55.000000, siteLongitude = 7.000000, 28.200000 degrees
PolarmountHourAngle=156.848941
RotorCmd = e173
RotorCmd e173, lastRotorCmd ffffffff
set rotor timeout to 360 seconds
prepare_sat System 0 Freq 11778000 Pol 1 SR 27500000 INV 2 FEC 2 orbpos 282 system 0 modulation 1 pilot 2, rolloff 0
tuning to 1178 mhz
OURSTATE: tuning
[CrossEPG_Wrapper] -> DEMUXER /dev/dvb/adapter0/demux1
[CrossEPG_Wrapper] -> FRONTEND 0
[SEC] set static current limiting
KEY: 352 OK
set sequence pos 3
[SEC] setVoltage 1
KEY: 352 OK
[SEC] sleep 900ms
[CrossEPG] TUNING
[CrossEPG_Wrapper] <- OK
[CrossEPG_Wrapper] <- OK
[CrossEPG_Wrapper] <- OK
[CrossEPG] TUNING
[CrossEPG] TUNING
[CrossEPG] TUNING
[CrossEPG] TUNING
[CrossEPG] TUNING
[CrossEPG] TUNING
[CrossEPG] TUNING
set sequence pos 9
[SEC] invalidate current rotorparams
[SEC] sendDiseqc: e0316ee173(?)
[SEC] sleep 1000ms
[CrossEPG] TUNING
[CrossEPG] TUNING
[CrossEPG] TUNING
[CrossEPG] TUNING
[CrossEPG] TUNING
[CrossEPG] TUNING
[CrossEPG] TUNING
[CrossEPG] TUNING
[CrossEPG] TUNING
set sequence pos 3
[SEC] setTone 1
[SEC] sleep 10ms
[SEC] setFrontend 0
setting frontend 0
[SEC] set timeout 1440
[SEC] sleep 250ms
[CrossEPG] TUNING
[CrossEPG] TUNING
[SEC] locked step 0 ok
set sequence pos -3
[SEC] sleep 250ms
[CrossEPG] TUNING
[CrossEPG] TUNING
[CrossEPG] TUNING
[SEC] locked step 1 ok
set sequence pos -3
[SEC] sleep 250ms
[CrossEPG] TUNING
[CrossEPG] TUNING
[SEC] locked step 2 ok
set sequence pos -3
[SEC] sleep 250ms
[CrossEPG] TUNING
[CrossEPG] TUNING
[CrossEPG] TUNING

Which I don't have in my logs...

[manikm]

im having one more go now! before going to bed!!

2 tuners - 1 motor, 1 28.2
i use 13.0e and 28.2 open tv epg

i will update to latest, once 775 finishes installing.

[judge]

i cant get a log either.

im staying away for now, with an old image until this is well and truely nailed, nothing wrong with old EPG method to be honest - taking up too much time

shouldnt u pull 775 until you get a better and more positive response.

how many happy 775+ users are there>???

I'm a perfectly happy 778 user for one...
And if you can't be bothered to turn on debug logs, why should we pull any build.
So far, we still only have ONE debug log with this issue, not a lot to go on really...

[manikm]

getting log now chief

watch this space

only 1 happy user, tut tut....

[manikm]

ok
tuners setup , channel list installed

updating to 778

no plugins or restores...
rebooting