thanks phoenix that is the exact way I flashed unitOriginally Posted by pheonix
still not moving from starting
do you see the prompt to press ok at any time on the display or tv screen ?.
My posts contain my own personal thoughts and opinions, they do not represent those of any organisation or group but my own.
If you don't like what I post, Don't read it.
SIMPLES.
I only see starting on the display
Then its possible that you need to either flash the latest bootloader from www.openvix.co.uk for this receiver or try another USB stick.
My posts contain my own personal thoughts and opinions, they do not represent those of any organisation or group but my own.
If you don't like what I post, Don't read it.
SIMPLES.
ive tried a few usb sticks still nothing just hangs on starting
I hope its not totally bricked
Try flashing this bootloader.
http://openvix.co.uk/index.php?dir=Bootloaders/TM-2T/
My posts contain my own personal thoughts and opinions, they do not represent those of any organisation or group but my own.
If you don't like what I post, Don't read it.
SIMPLES.
ok will try that tomorrow the box is at a friends house will let you know how it goes
nope tried bootloader but still nothing ,still says starting got the box in my house now and replaced with perfectly working tm2t , one thing ive noticed is the Ethernet cable end is not flashing , should this be flashing or am I barking up the wrong tree
anyone got any ideas box was going good before I tried to update
If it were able to take a bootloader by USB, it would have taken an image.
IMO, if it accepts bootloader by serial, you can flash an image again. If no joy, it will have to be sent back to TM. Same process, but use latest and appropriate bootloader.
http://www.world-of-satellite.com/sh...oader+recovery
abu thanks for advice ,ive tried flashing different images , used different usb sticks, tried booloaders , nothing just hangs on starting, the only thing I haven't tried is disconnecting cable from hard drive as someone suggested but don't really want to try that as it probably will be ruined if I gave that a go
so back to tm with it , how do I get in contact with them
Please do as Sicilian suggests. No sat cable, no network cable, no hdd cable.
If that does not work, please try flashing the bootloader by serial, not usb.
TM number is 020 8884 0701
Sicilian (06-11-13)
ok tried to flash box . no sat cable , no network cable, removed sata cable from hard drive , tried flashing image still states starting , tried bootloader still nothing stuck on starting , so it looks like a phone call to technomate tomorrow
Posting Permissions
Reply With Quote