is it still possible to build an image for this box on oe-alliance
what pre-reqs are required in ubuntu 12.04
its been a while whats the check out process and build commands pls
Hi ren, yes you can still build ViX or any other OE-Alliance images your self. its been a long long time since i looked into it but you can download a make fie from here.
http://openvix.co.uk/index.php?dir=Build-Script/
My posts contain my own personal thoughts and opinions, they do not represent those of any organisation or group but my own.
If you don't like what I post, Don't read it.
SIMPLES.
abu baniaz (26-10-13),renwich (26-10-13)
thanks tried that but the build fails not far in
NOTE: Running task 83 of 8850 (ID: 690, virtual:native:/home/user/oe-alliance/oe-alliance/openembedded-core/meta/recipes-support/gmp/gmp_5.0.4.bb, do_compile)
NOTE: Running task 155 of 8850 (ID: 3743, /home/user/oe-alliance/oe-alliance/openembedded-core/meta/recipes-devtools/gcc/gcc-cross-initial_4.6.bb, do_unpack)
NOTE: package gmp-native-5.0.4-r1: task do_compile: Started
NOTE: package gcc-cross-initial-4.6.3+svnr184847-r27: task do_unpack: Started
ERROR: Function failed: Unpack failure for URL: 'svn://gcc.gnu.org/svn/gcc/branches;module=gcc-4_6-branch;proto=http'. Unpack command PATH="/home/user/oe-alliance/oe-alliance/builds/openvix/tmtwin/tmp/sysroots/i686-linux/usr/bin/mips32el-oe-linux:/home/user/oe-alliance/oe-alliance/builds/openvix/tmtwin/tmp/sysroots/i686-linux/home/user/oe-alliance/oe-alliance/builds/openvix/tmtwin/tmp/sysroots/i686-linux/usr/bin/mips32el-oe-linux.gcc-cross-initial/crossscripts:/home/user/oe-alliance/oe-alliance/builds/openvix/tmtwin/tmp/sysroots/i686-linux/usr/sbin:/home/user/oe-alliance/oe-alliance/builds/openvix/tmtwin/tmp/sysroots/i686-linux/usr/bin:/home/user/oe-alliance/oe-alliance/builds/openvix/tmtwin/tmp/sysroots/i686-linux/sbin:/home/user/oe-alliance/oe-alliance/builds/openvix/tmtwin/tmp/sysroots/i686-linux//bin:/home/user/oe-alliance/oe-alliance/openembedded-core/scripts:/home/user/oe-alliance/oe-alliance/bitbake/bin:/usr/local/sbin:/usr/local/bin:/usr/sbin:/usr/bin:/sbin:/bin:/usr/games:/home/user/oe-alliance/oe-alliance/openembedded-core/scripts" tar xz --no-same-owner -f /home/user/oe-alliance/oe-alliance/sources/gcc-4_6-branch_gcc.gnu.org_.svn.gcc.branches_184847_.tar.g z failed with return value 2
ERROR: Logfile of failure stored in: /home/user/oe-alliance/oe-alliance/builds/openvix/tmtwin/tmp/work-shared/gcc-4.6.3+svnr184847-r27/temp/log.do_unpack.1342
Log data follows:
| NOTE: Unpacking /home/user/oe-alliance/oe-alliance/sources/gcc-4_6-branch_gcc.gnu.org_.svn.gcc.branches_184847_.tar.g z to /home/user/oe-alliance/oe-alliance/builds/openvix/tmtwin/tmp/work-shared/gcc-4.6.3+svnr184847-r27/
|
| gzip: stdin: decompression OK, trailing garbage ignored
| tar: Child returned status 2
| tar: Error is not recoverable: exiting now
| ERROR: Function failed: Unpack failure for URL: 'svn://gcc.gnu.org/svn/gcc/branches;module=gcc-4_6-branch;proto=http'. Unpack command PATH="/home/user/oe-alliance/oe-alliance/builds/openvix/tmtwin/tmp/sysroots/i686-linux/usr/bin/mips32el-oe-linux:/home/user/oe-alliance/oe-alliance/builds/openvix/tmtwin/tmp/sysroots/i686-linux/home/user/oe-alliance/oe-alliance/builds/openvix/tmtwin/tmp/sysroots/i686-linux/usr/bin/mips32el-oe-linux.gcc-cross-initial/crossscripts:/home/user/oe-alliance/oe-alliance/builds/openvix/tmtwin/tmp/sysroots/i686-linux/usr/sbin:/home/user/oe-alliance/oe-alliance/builds/openvix/tmtwin/tmp/sysroots/i686-linux/usr/bin:/home/user/oe-alliance/oe-alliance/builds/openvix/tmtwin/tmp/sysroots/i686-linux/sbin:/home/user/oe-alliance/oe-alliance/builds/openvix/tmtwin/tmp/sysroots/i686-linux//bin:/home/user/oe-alliance/oe-alliance/openembedded-core/scripts:/home/user/oe-alliance/oe-alliance/bitbake/bin:/usr/local/sbin:/usr/local/bin:/usr/sbin:/usr/bin:/sbin:/bin:/usr/games:/home/user/oe-alliance/oe-alliance/openembedded-core/scripts" tar xz --no-same-owner -f /home/user/oe-alliance/oe-alliance/sources/gcc-4_6-branch_gcc.gnu.org_.svn.gcc.branches_184847_.tar.g z failed with return value 2
NOTE: package gcc-cross-initial-4.6.3+svnr184847-r27: task do_unpack: Failed
ERROR: Task 3743 (/home/user/oe-alliance/oe-alliance/openembedded-core/meta/recipes-devtools/gcc/gcc-cross-initial_4.6.bb, do_unpack) failed with exit code '1'
Waiting for 1 running tasks to finish:
0: gmp-native-5.0.4-r1 do_compile (pid 1341)
The best person to answer this would be andyblac him self, most of it just goes rite over my head.
My posts contain my own personal thoughts and opinions, they do not represent those of any organisation or group but my own.
If you don't like what I post, Don't read it.
SIMPLES.
Originally Posted by renwich
Code:sudo apt-get install -y autoconf automake bison bzip2 cvs diffstat flex g++ gawk gcc gettext git-core gzip help2man ncurses-bin ncurses-dev libc6-dev libtool make texinfo patch perl pkg-config subversion tar texi2html wget zlib1g-dev chrpath libxml2-utils xsltproc libglib2.0-dev python-setuptools libc6-i386 genromfs guile-1.8-libs gparted bitbakeit look you have not tar installed
DM500HD - XT6500HD - Sezam Marvel
I'm attempting to build oe-alliance its been a long while and I'm rusty with this stuff so this is probably something stupid, any ideas on the below
Code:tapper@ubuntu:~/builds/oe-alliance$ MACHINE=dm800se DISTRO=openvix make image Generating /home/tapper/builds/oe-alliance/builds/openvix/dm800se/env.source Generating /home/tapper/builds/oe-alliance/builds/openvix/dm800se/conf/openvix.conf Generating /home/tapper/builds/oe-alliance/builds/openvix/dm800se/conf/bblayers.conf Generating /home/tapper/builds/oe-alliance/builds/openvix/dm800se/conf/local.conf NOTE: Your conf/bblayers.conf has been automatically updated. WARNING: Unable to get checksum for linux-etxx00 SRC_URI entry defconfig: file could not be found | ETA: --:--:-- WARNING: Unable to get checksum for linux-etxx00 SRC_URI entry defconfig: file could not be found WARNING: Unable to get checksum for linux-etxx00 SRC_URI entry defconfig: file could not be found WARNING: Unable to get checksum for linux-etxx00 SRC_URI entry defconfig: file could not be found WARNING: Unable to get checksum for linux-vuplus SRC_URI entry defconfig: file could not be found | ETA: 00:03:07 WARNING: Unable to get checksum for linux-vuplus SRC_URI entry defconfig: file could not be found WARNING: Unable to get checksum for linux-tripledot SRC_URI entry defconfig: file could not be found | ETA: 00:03:54 WARNING: Unable to get checksum for linux-skylake SRC_URI entry defconfig: file could not be found WARNING: Unable to get checksum for linux-odin SRC_URI entry defconfig: file could not be found WARNING: Unable to get checksum for linux-odin SRC_URI entry dm800se-board.patch: file could not be found WARNING: Unable to get checksum for odin-backup SRC_URI entry odin-backup.sh: file could not be found | ETA: 00:03:48 WARNING: Unable to get checksum for linux-ixuss SRC_URI entry defconfig: file could not be found WARNING: Unable to get checksum for linux-ini-hdp SRC_URI entry defconfig: file could not be found WARNING: Unable to get checksum for linux-ini-hde2 SRC_URI entry defconfig: file could not be found WARNING: Unable to get checksum for linux-ini-hde SRC_URI entry defconfig: file could not be found WARNING: Unable to get checksum for linux-ini-hdx SRC_URI entry defconfig: file could not be found WARNING: Unable to get checksum for gigablue-ethwol SRC_URI entry ethwol.sh: file could not be found WARNING: Unable to get checksum for linux-gigablue SRC_URI entry defconfig: file could not be found | ETA: 00:03:34 WARNING: Unable to get checksum for linux-gigablue SRC_URI entry defconfig: file could not be found WARNING: Unable to get checksum for gigablue-dvb-modules-gbultra SRC_URI entry ddbootup: file could not be found WARNING: Unable to get checksum for linux-gigablue SRC_URI entry defconfig: file could not be found WARNING: Unable to get checksum for gigablue-dvb-modules-gb800solo SRC_URI entry ddbootup: file could not be found WARNING: Unable to get checksum for gigablue-dvb-modules-gb800seplus SRC_URI entry ddbootup: file could not be found WARNING: Unable to get checksum for gigablue-dvb-modules-gb800ue SRC_URI entry ddbootup: file could not be found WARNING: Unable to get checksum for gigablue-dvb-modules-gbultraue SRC_URI entry ddbootup: file could not be found WARNING: Unable to get checksum for gigablue-dvb-modules-gbultrase SRC_URI entry ddbootup: file could not be found WARNING: Unable to get checksum for gigablue-dvb-modules-gb800ueplus SRC_URI entry ddbootup: file could not be found WARNING: Unable to get checksum for gigablue-dvb-modules-gbquadplus SRC_URI entry ddbootup: file could not be found WARNING: Unable to get checksum for gigablue-dvb-modules-gbquad SRC_URI entry ddbootup: file could not be found WARNING: Unable to get checksum for gigablue-dvb-modules-gb800se SRC_URI entry ddbootup: file could not be found | ETA: 00:03:29 WARNING: Unable to get checksum for gigablue-dvb-modules-gbipbox SRC_URI entry ddbootup: file could not be found WARNING: Unable to get checksum for linux-fulan SRC_URI entry defconfig: file could not be found WARNING: Unable to get checksum for fulan-dvb-modules SRC_URI entry modules.conf: file could not be found WARNING: Unable to get checksum for fulan-dvb-modules SRC_URI entry modules-conf.conf: file could not be found WARNING: Unable to get checksum for linux-formuler SRC_URI entry defconfig: file could not be found | ETA: 00:03:24 WARNING: Unable to get checksum for linux-entwopia SRC_URI entry defconfig: file could not be found WARNING: Unable to get checksum for linux-ebox SRC_URI entry defconfig: file could not be found WARNING: Unable to get checksum for dreambox-enigma2-config SRC_URI entry skin_box.xml: file could not be found | ETA: 00:03:20 WARNING: Unable to get checksum for linux-dags SRC_URI entry defconfig: file could not be found | ETA: 00:03:13 WARNING: Unable to get checksum for linux-cube SRC_URI entry defconfig: file could not be found WARNING: Unable to get checksum for linux-ceryon SRC_URI entry defconfig: file could not be found WARNING: Unable to get checksum for linux-blackbox SRC_URI entry defconfig: file could not be found WARNING: Unable to get checksum for linux-azbox SRC_URI entry defconfig: file could not be found WARNING: Unable to get checksum for linux-azbox SRC_URI entry defconfig: file could not be found WARNING: Unable to get checksum for linux-airdigital SRC_URI entry defconfig: file could not be found | ETA: 00:03:14 WARNING: Unable to get checksum for graphlcd-base SRC_URI entry graphlcd.conf: file could not be found | ETA: 00:03:39 WARNING: Unable to get checksum for graphlcd-base SRC_URI entry glcd-mipsel.patch: file could not be found WARNING: Unable to get checksum for graphlcd-base SRC_URI entry glcd-vuduo2.patch: file could not be found NOTE: Error during finalise of /home/tapper/builds/oe-alliance/openembedded-core/meta/recipes-extended/images/core-image-testmaster-initramfs.bb ERROR: ExpansionError during parsing /home/tapper/builds/oe-alliance/openembedded-core/meta/recipes-extended/images/core-image-testmaster-initramfs.bb: Failure expanding variable toolchain_create_sdk_version: ExpansionError: Failure expanding variable METADATA_REVISION, expression was ${@base_detect_revision(d)} which triggered exception OSError: [Errno 12] Cannot allocate memory NOTE: Error during finalise of /home/tapper/builds/oe-alliance/openembedded-core/meta/recipes-extended/images/core-image-lsb-sdk.bb Summary: There were 48 WARNING messages shown. Summary: There was 1 ERROR message shown, returning a non-zero exit code. make: *** [image] Error 1 tapper@ubuntu:~/builds/oe-alliance$
vix dont support dreambox images
Vu Ultimo4K, OpenViX 5.0, 8xdvb-c, 8xdvb-s2, 2xdvb-t2
Vu Solo4K, OpenViX 5.0, 8xdvb-s2
Dreambox DM900, OpenViX 5.0, 2xdvb-s2, 2xdvb-c/t2
Terrestrial, Cable, Fixed 28.2e + Unicable2 LNB
there is a build target for it.?
in the makefile?
Vu Ultimo4K, OpenViX 5.0, 8xdvb-c, 8xdvb-s2, 2xdvb-t2
Vu Solo4K, OpenViX 5.0, 8xdvb-s2
Dreambox DM900, OpenViX 5.0, 2xdvb-s2, 2xdvb-c/t2
Terrestrial, Cable, Fixed 28.2e + Unicable2 LNB
There have been DM models in the ViX make file for years since we briefly built a set of ViX 2.0 DM images, technically it may be possible to build a ViX Apollo image for DM hardware but it would likely need a good deal of work in the GIT to achieve and it's not something we are going to do as we have no plans to offer support for DM hardware.
My posts contain my own personal thoughts and opinions, they do not represent those of any organisation or group but my own.
If you don't like what I post, Don't read it.
SIMPLES.
does vix still support the tmtwin
Code:tapper@ubuntu:~/builds/oe-alliance$ MACHINE=tmtwin DISTRO=openvix make image Generating /home/tapper/builds/oe-alliance/builds/openvix/dags1/env.source Generating /home/tapper/builds/oe-alliance/builds/openvix/dags1/conf/openvix.conf Generating /home/tapper/builds/oe-alliance/builds/openvix/dags1/conf/bblayers.conf Generating /home/tapper/builds/oe-alliance/builds/openvix/dags1/conf/local.conf NOTE: Your conf/bblayers.conf has been automatically updated. WARNING: Unable to get checksum for linux-etxx00 SRC_URI entry defconfig: file could not be found | ETA: --:--:-- WARNING: Unable to get checksum for linux-etxx00 SRC_URI entry defconfig: file could not be found WARNING: Unable to get checksum for linux-etxx00 SRC_URI entry defconfig: file could not be found WARNING: Unable to get checksum for linux-etxx00 SRC_URI entry defconfig: file could not be found WARNING: Unable to get checksum for linux-vuplus SRC_URI entry defconfig: file could not be found | ETA: 00:03:05 WARNING: Unable to get checksum for linux-vuplus SRC_URI entry defconfig: file could not be found WARNING: Unable to get checksum for linux-tripledot SRC_URI entry defconfig: file could not be found | ETA: 00:03:51 WARNING: Unable to get checksum for linux-skylake SRC_URI entry defconfig: file could not be found WARNING: Unable to get checksum for linux-odin SRC_URI entry defconfig: file could not be found WARNING: Unable to get checksum for linux-odin SRC_URI entry dags1-board.patch: file could not be found WARNING: Unable to get checksum for odin-backup SRC_URI entry odin-backup.sh: file could not be found | ETA: 00:03:51 WARNING: Unable to get checksum for linux-ixuss SRC_URI entry defconfig: file could not be found WARNING: Unable to get checksum for linux-ini-hdp SRC_URI entry defconfig: file could not be found WARNING: Unable to get checksum for linux-ini-hde2 SRC_URI entry defconfig: file could not be found WARNING: Unable to get checksum for linux-ini-hdx SRC_URI entry defconfig: file could not be found WARNING: Unable to get checksum for linux-ini-hde SRC_URI entry defconfig: file could not be found WARNING: Unable to get checksum for gigablue-ethwol SRC_URI entry ethwol.sh: file could not be found WARNING: Unable to get checksum for linux-gigablue SRC_URI entry defconfig: file could not be found | ETA: 00:03:38 WARNING: Unable to get checksum for linux-gigablue SRC_URI entry defconfig: file could not be found WARNING: Unable to get checksum for gigablue-dvb-modules-gbultra SRC_URI entry ddbootup: file could not be found WARNING: Unable to get checksum for linux-gigablue SRC_URI entry defconfig: file could not be found WARNING: Unable to get checksum for gigablue-dvb-modules-gb800solo SRC_URI entry ddbootup: file could not be found WARNING: Unable to get checksum for gigablue-dvb-modules-gb800seplus SRC_URI entry ddbootup: file could not be found WARNING: Unable to get checksum for gigablue-dvb-modules-gbultraue SRC_URI entry ddbootup: file could not be found WARNING: Unable to get checksum for gigablue-dvb-modules-gb800ue SRC_URI entry ddbootup: file could not be found WARNING: Unable to get checksum for gigablue-dvb-modules-gbultrase SRC_URI entry ddbootup: file could not be found WARNING: Unable to get checksum for gigablue-dvb-modules-gb800ueplus SRC_URI entry ddbootup: file could not be found WARNING: Unable to get checksum for gigablue-dvb-modules-gbquadplus SRC_URI entry ddbootup: file could not be found WARNING: Unable to get checksum for gigablue-dvb-modules-gbquad SRC_URI entry ddbootup: file could not be found WARNING: Unable to get checksum for gigablue-dvb-modules-gb800se SRC_URI entry ddbootup: file could not be found | ETA: 00:03:32 WARNING: Unable to get checksum for gigablue-dvb-modules-gbipbox SRC_URI entry ddbootup: file could not be found WARNING: Unable to get checksum for linux-fulan SRC_URI entry defconfig: file could not be found WARNING: Unable to get checksum for fulan-dvb-modules SRC_URI entry modules.conf: file could not be found WARNING: Unable to get checksum for fulan-dvb-modules SRC_URI entry modules-conf.conf: file could not be found WARNING: Unable to get checksum for linux-formuler SRC_URI entry defconfig: file could not be found | ETA: 00:03:27 WARNING: Unable to get checksum for linux-entwopia SRC_URI entry defconfig: file could not be found WARNING: Unable to get checksum for linux-ebox SRC_URI entry defconfig: file could not be found WARNING: Unable to get checksum for linux-dreambox SRC_URI entry defconfig: file could not be found WARNING: Unable to get checksum for dreambox-dvb-modules-dm500hd SRC_URI entry modules: file could not be found WARNING: Unable to get checksum for dreambox-dvb-modules-dm7020hd SRC_URI entry modules: file could not be found WARNING: Unable to get checksum for dreambox-dvb-modules-dm820 SRC_URI entry modules: file could not be found WARNING: Unable to get checksum for dreambox-dvb-modules-dm8000 SRC_URI entry modules: file could not be found WARNING: Unable to get checksum for dreambox-dvb-modules-dm500hdv2 SRC_URI entry modules: file could not be found WARNING: Unable to get checksum for dreambox-dvb-modules-dm7080 SRC_URI entry modules: file could not be found WARNING: Unable to get checksum for dreambox-dvb-modules-dm800se SRC_URI entry modules: file could not be found | ETA: 00:03:21 WARNING: Unable to get checksum for dreambox-enigma2-config SRC_URI entry skin_box.xml: file could not be found WARNING: Unable to get checksum for dreambox-dvb-modules-dm800sev2 SRC_URI entry modules: file could not be found WARNING: Unable to get checksum for linux-cube SRC_URI entry defconfig: file could not be found | ETA: 00:03:14 WARNING: Unable to get checksum for linux-ceryon SRC_URI entry defconfig: file could not be found WARNING: Unable to get checksum for linux-blackbox SRC_URI entry defconfig: file could not be found WARNING: Unable to get checksum for linux-azbox SRC_URI entry defconfig: file could not be found WARNING: Unable to get checksum for linux-azbox SRC_URI entry defconfig: file could not be found WARNING: Unable to get checksum for linux-airdigital SRC_URI entry defconfig: file could not be found | ETA: 00:03:14 WARNING: Unable to get checksum for graphlcd-base SRC_URI entry graphlcd.conf: file could not be found | ETA: 00:03:42 WARNING: Unable to get checksum for graphlcd-base SRC_URI entry glcd-mipsel.patch: file could not be found WARNING: Unable to get checksum for graphlcd-base SRC_URI entry glcd-vuduo2.patch: file could not be found NOTE: Error during finalise of /home/tapper/builds/oe-alliance/openembedded-core/meta/recipes-extended/images/core-image-testmaster.bb:01:37 ERROR: ExpansionError during parsing /home/tapper/builds/oe-alliance/openembedded-core/meta/recipes-extended/images/core-image-testmaster.bb: Failure expanding variable toolchain_create_sdk_version: ExpansionError: Failure expanding variable METADATA_REVISION, expression was ${@base_detect_revision(d)} which triggered exception OSError: [Errno 12] Cannot allocate memory NOTE: Error during finalise of /home/tapper/builds/oe-alliance/openembedded-core/meta/recipes-extended/images/core-image-lsb-sdk.bb Summary: There were 56 WARNING messages shown. Summary: There was 1 ERROR message shown, returning a non-zero exit code. make: *** [image] Error 1 tapper@ubuntu:~/builds/oe-alliance$
TM-Twin building fine here m8. I'll try get some info on your error.
D I S C L A I M E R
My right to post information is protected under the rights for freedom act. In all instances, information discussed here on my posts are either hypothetical in nature, out of general curiosity, common knowledge, public knowledge, or role-play. Any use of the collective descriptions and shared knowledge from any of my posts are at the sole discretion of the reader. I am not responsible for what you do with it!
Please help keep OpenViX online, donate HERE.
Rules can be found HERE
Support our sponsor World-Of-Satellite HERE
GIGABLUE UHD QUAD 4K, VU+ DUO 4K SE, ZGEMMA H7S, VU+ UNO 4K SE
Triax 1.1m Powered by TM2600, Fixed 28.2 Zone 2 dish with GT-SAT Unicable
renwich (09-01-15)
installed bitbake?
maybe give so more info, how do we know your server is setup right in the first place?
have you followed any guides to setup server?
Vu Ultimo4K, OpenViX 5.0, 8xdvb-c, 8xdvb-s2, 2xdvb-t2
Vu Solo4K, OpenViX 5.0, 8xdvb-s2
Dreambox DM900, OpenViX 5.0, 2xdvb-s2, 2xdvb-c/t2
Terrestrial, Cable, Fixed 28.2e + Unicable2 LNB
Are you building on a VM Machine, few people I've passed error too all say memory issue on your build machine.
D I S C L A I M E R
My right to post information is protected under the rights for freedom act. In all instances, information discussed here on my posts are either hypothetical in nature, out of general curiosity, common knowledge, public knowledge, or role-play. Any use of the collective descriptions and shared knowledge from any of my posts are at the sole discretion of the reader. I am not responsible for what you do with it!
Please help keep OpenViX online, donate HERE.
Rules can be found HERE
Support our sponsor World-Of-Satellite HERE
GIGABLUE UHD QUAD 4K, VU+ DUO 4K SE, ZGEMMA H7S, VU+ UNO 4K SE
Triax 1.1m Powered by TM2600, Fixed 28.2 Zone 2 dish with GT-SAT Unicable
abu baniaz (10-01-15),renwich (09-01-15)
spot on Sic, appears 2gb is not quite enough
Sicilian (09-01-15)
Posting Permissions
Reply With Quote
