solo2 dead please help

[a7farouk]

my solo2 try to flash it but after start flash stand with massage ( ubifs update ) and not finish the flash

i try flash vti 6.1 and black hole 2.0.5 and the same error happen what can i do ?

[judge]

How long did you leave ubifs update on the VFD for?

Try a different USB stick & flash again.

[Prioryman]

I sort of had the same problem and change the USB stick and it flashed first time.

[a7farouk]

nearly half hour

[judge]

nearly half hour

shouldn't take that long...
try a new USB stick.

[a7farouk]

i try anther usb but not work too

after that the solo2 work again as before but i cant record on hdd

i made initialize but when i chose rec. give me ( couldnt rec due to invalid service 1:0:1:2c2:7:800:dca0000:0:0: )

please need help soon

[Prioryman]

I found that a 1Tb hard drive I had (Toshiba MK1059GSM ) was at fault and replaced it with a 500Gb drive and the Solo2 is now perfect, both speed and channel change is fast and reboot is quicker.

Try removing the hard drive and do some tests then replace hard drive is it is slow or locks up bin the hard drive and get another.

[judge]

i try anther usb but not work too

after that the solo2 work again as before but i cant record on hdd

i made initialize but when i chose rec. give me ( couldnt rec due to invalid service 1:0:1:2c2:7:800:dca0000:0:0: )

please need help soon

so, it is booting again now?
if so, what image & build are you using?
how are you generating your channel lists?

[Rob van der Does]

In cases like this it's wise to make a bootlog (via RS232); that will tell you exactly what is going wrong.

[AJT]

my solo2 try to flash it but after start flash stand with massage ( ubifs update ) and not finish the flash

i try flash vti 6.1 and black hole 2.0.5 and the same error happen what can i do ?

Just format USB to fat 32 on your computer re-download image and unzip copy folder to usb.some images depending on size will take a little longer to flash but not 30 mins.I have had this a few times and just start flash again..ie turn off box and on again and it flashes okay.

[a7farouk]

oky i change usb stick and re flash the box.... its working now

but i release very bad picture on vti image 6.0.1 and flash with black hole 2.0.5 glaxy its very good picture

why vti is poor picture in solo2 ?
i used vti in solo box the picture was very good