DUO2 tuner config question

[Rob van der Does]

But when I want to watch any HD channels it takes around 5-10 seconds for channel to start?

What subscription/smartcard and softcam are you using?

[Kaushal1982]

What subscription/smartcard and softcam are you using?

Cccam 2.3.0

[Rob van der Does]

That's only half an answer........

What subscription/smartcard ........

[jimmyjoe]

really dumb question here.... but what is the difference between a twin and single tuner, except for saving space? assume a twin still needs to lnb feeds?

so no point in me getting two twins if i only have 2 feeds?

[Stanman]

It allows you to have more feeds and therefore less conflicts in recording,

[jimmyjoe]

It allows you to have more feeds and therefore less conflicts in recording,

thanks for reply stan... it still needs 2 feeds tho?

[Sirius]

thanks for reply stan... it still needs 2 feeds tho?

Each tuner will need it's own feed from the lnb for best results. IE more recordings less clashes

Sent from my D5503 using Tapatalk

[fintannl]

Buudy of mine bought the vu duo2 in a shop in Dublin. It has the double tuner in slot a and nothing in slot b. So in menu setup service searching tuner configuration you see tuner a and b both setup as simple, single, astra 28.2 and no. So if he starts a recording on rte1 and say now switches to sky1 the TV stays blank with good signal strength. Strange thing is if he goes to say BBC HD (is FTA channel) the channel will open. So this proves that both tuners are properly cabled. Any ideas?

[bellejt]

wrong softcam.Use cccam 2.3.0 or oscam.

[wullboy]

Buudy of mine bought the vu duo2 in a shop in Dublin. It has the double tuner in slot a and nothing in slot b. So in menu setup service searching tuner configuration you see tuner a and b both setup as simple, single, astra 28.2 and no. So if he starts a recording on rte1 and say now switches to sky1 the TV stays blank with good signal strength. Strange thing is if he goes to say BBC HD (is FTA channel) the channel will open. So this proves that both tuners are properly cabled. Any ideas?

I had a similar problem with a duo2, and the image was corrupt, i put a old back up on it, and it stared recording and cleared the other channels, i then did an online update back to my original v018 image, and everything was fine,

[fintannl]

wrong softcam.Use cccam 2.3.0 or oscam.

Sure enough 2.3.0 did the business. Thanks. Cccam 2.2.1 didn't work. Strange

[DaMacFunkin]

Needs to be a sticky somehow, for nearly a year now people have been having this 'problem'