Hope you guys dont mind me jumping in here with a suggestion.
I had that problem on my vu+ solo (not the solo 2) using wifi stick and got the unconfirmed ip and nameserver.
The way I got round was to log onto my router check what security encription I was using and matched that with wifi stick.
So for example router was using wep but wireless card didnt have that option so I changed router to wpa and setup wireless card with wpa/wpa2 and then it worked also check channel number your router is using I found that ch6 worked best.
Sent from my GT-I9300 using Tapatalk 2
Vu+ Duo
Vu+ Solo
Gigablue HD 800 SE
All with latest vix image - Autobouquets - SgtFlipflop 28.2e Picons - WebradioFS
Thanks for the suggestion,
Yes I tried that as well, I have changed my router to Wpa /aes and changed the box wifi to wpa /wpa2 and I also tried other settings as well, but on ch6 suggestion I only tried ch11 and auto, I will give it a go when I go home ch6.
I appreciated your suggestion mate,
Thank you
I had a similar problem with my gb800se.
I fancied a virgin image and loaded 710.
I had a proper back-up but it would not finish due lack of internet connection.
I checked network setup but there was not a wireless selection.
After some time of anger ı connected the device with ethernet cable and finished backing-up.
It was easier in earlier images e.g. 694
Last edited by girginoz; 06-08-13 at 16:59.
[COLOR="#0000FF"]Octagon sf8008 single/COLOR] 1.5m motorized dish 95E-30W
No got Bt router on latest build as I said been all over menu gonna try BH when I get home fri I will report back my findings
Things to check are.
1) can you connect without password on wifi (make an open access point - even use mobile phone if it gives this option, this is a better test as it uses your box with a new AP)
2) can you connect using WPA or WPA2 without any special chars in password (for example use the simplest password possible)
3) Also try Static IP provided by router rather than DHCP (may have to connect with open access point first)
I'm also guessing it's not the box but rather a weird setting mismatch.
Last edited by zoro25; 06-08-13 at 18:38.
Ok try all on fri before change image and report back thanks
I got managed to get Ip confirmed!! name server still unconfirmed but working on it at the moment...
Sorry to knock you back mate was there Sunday still no joy zorro I'm on my mobile was at the beach when I read your suggestion but back at carvan read again all this I done other than mobile but tried to connect to a bridge which would give same result
Last edited by parma; 06-08-13 at 21:58.
Solution for Wifi,
1- Change your rooter security settings to WEP and make sure you use ch 6 and save it.
2 Go to the adapter settings on your box change the encryiption type to Wep and put your wep password in first try to connect it when DHCp yes and you can do the network test now but after that you can say No to DHCP and try to connect with your wifi again.
3- Now you can do your network test and it will come as Ip confirmed but If the name server still unconfirmed then reboot the rooter and box then do the network test again. It must be all green and thicked except DHCP.
Well done mate I do it Friday and confirm thanks for the effort you put in
Thank very much lol that exactly I was implying.
Good you got sorted mate. To anyone else having these problems the ch's to try on your router are 1, 6, 11 one will work better than the other. But most important thing is the encription MUST match that of the router on your wireless adaptors
Sent from my GT-I9300 using Tapatalk 2
Vu+ Duo
Vu+ Solo
Gigablue HD 800 SE
All with latest vix image - Autobouquets - SgtFlipflop 28.2e Picons - WebradioFS
bsoylemezli (07-08-13)