Hello Guest, if you are reading this it means you have not registered yet. Please take a second, Click here to register, and in a few simple steps you will be able to enjoy our community and use our OpenViX support section.
Results 1 to 13 of 13

Thread: Card reader problems

  1. #1

    Title
    Junior Member
    Join Date
    Jun 2011
    Posts
    6
    Thanks
    3
    Thanked 0 Times in 0 Posts

    Thumbs down Card reader problems

    This box is having problems with card reader after a will it stops working...
    I have tested several versions of oscam and configs and several Images like Egami 3.0 last and openATV also the last.
    And different drivers dvb.ko .
    Big deception for this box that claims to be compatible with VU images and DM.
    The rest is all ok

  2. #2

    Title
    Junior Member
    Join Date
    Jun 2011
    Posts
    6
    Thanks
    3
    Thanked 0 Times in 0 Posts
    I have now the card readerīs working with the openatv-3.0-ventonhdx-20130707_usb the only one that is stable with the card readers but unsable with the tuner.
    after a while it says not found on mostly Hd cannels (driver problem).
    I hope venton solve this issuers with the driverīs sown.

  3. #3
    Sicilian's Avatar
    Title
    The Boss
    Join Date
    Mar 2010
    Posts
    29,649
    Thanks
    23,585
    Thanked 26,054 Times in 7,638 Posts
    Quote Originally Posted by ace_pt View Post
    after a while it says not found on mostly Hd cannels (driver problem).
    I hope venton solve this issuers with the driverīs sown.
    There is no driver problem with the Venton, if you have a Tuner issue I suggest you contact where you purchased, most likely a faulty tuner module. Regards the card reader, again, no driver issues. Check your configs and contact where you purchased.

    Venton are very good with fixing driver issues and there no such issues as you have reported.
    D I S C L A I M E R

    My right to post information is protected under the rights for freedom act. In all instances, information discussed here on my posts are either hypothetical in nature, out of general curiosity, common knowledge, public knowledge, or role-play. Any use of the collective descriptions and shared knowledge from any of my posts are at the sole discretion of the reader. I am not responsible for what you do with it!

    Please help keep OpenViX online, donate HERE.
    Rules can be found
    HERE
    Support our sponsor World-Of-Satellite
    HERE
    GIGABLUE UHD QUAD 4K, VU+ DUO 4K SE, ZGEMMA H7S, VU+ UNO 4K SE
    Triax 1.1m Powered by TM2600, Fixed 28.2 Zone 2 dish with GT-SAT Unicable





  4. #4

    Title
    Junior Member
    Join Date
    Jun 2011
    Posts
    6
    Thanks
    3
    Thanked 0 Times in 0 Posts
    Ok a see that you are a seals man, or you are joking with my intelligence before you post please read the links that im going to give you sow you dont waste my time.
    http://www.world-of-satellite.com/sh...2-HD3&p=224506
    A link for the drivers
    HTML Code:
    http://code-ini.com/index.php?open=software/drivers
    If no problem why to many drivers OE Egami team says "that the drivers need improvement"

    Thanks
    Last edited by Stanman; 30-07-13 at 21:58. Reason: code your live links

  5. #5
    Sicilian's Avatar
    Title
    The Boss
    Join Date
    Mar 2010
    Posts
    29,649
    Thanks
    23,585
    Thanked 26,054 Times in 7,638 Posts
    Theres no driver issues with the Tuners in the HDx, if there was I'd be the 1st to report it as I have private access to there bug tracker. Check your feeds/LNB, or you may have a faulty tuner module.

    If you have an issue with your card reader it may be card specific, I suggest you post your exact card and logs.

    The links you post just show they have released regular driver updates, what exactly is wrong with that?
    D I S C L A I M E R

    My right to post information is protected under the rights for freedom act. In all instances, information discussed here on my posts are either hypothetical in nature, out of general curiosity, common knowledge, public knowledge, or role-play. Any use of the collective descriptions and shared knowledge from any of my posts are at the sole discretion of the reader. I am not responsible for what you do with it!

    Please help keep OpenViX online, donate HERE.
    Rules can be found
    HERE
    Support our sponsor World-Of-Satellite
    HERE
    GIGABLUE UHD QUAD 4K, VU+ DUO 4K SE, ZGEMMA H7S, VU+ UNO 4K SE
    Triax 1.1m Powered by TM2600, Fixed 28.2 Zone 2 dish with GT-SAT Unicable





  6. #6

    Title
    Junior Member
    Join Date
    Jun 2011
    Posts
    6
    Thanks
    3
    Thanked 0 Times in 0 Posts
    Hi again Egami image from 25/06/2013 i have card reader problems the same with opentv from 30/07/2013 tested several oscam configīs and oscam versions the same goes for SBOX0.0.5.2 to 0.0.5.4
    With OpenATV 05/07/2013 and OpenVix image no card reader problems tested with several configs oscam versions.... SBOX not tested
    Explain that ?

  7. #7
    Sicilian's Avatar
    Title
    The Boss
    Join Date
    Mar 2010
    Posts
    29,649
    Thanks
    23,585
    Thanked 26,054 Times in 7,638 Posts
    Quote Originally Posted by ace_pt View Post
    Hi again Egami image from 25/06/2013 i have card reader problems the same with opentv from 30/07/2013 tested several oscam configīs and oscam versions the same goes for SBOX0.0.5.2 to 0.0.5.4
    With OpenATV 05/07/2013 and OpenVix image no card reader problems tested with several configs oscam versions.... SBOX not tested
    Explain that ?
    How can we possibly explain anything! You've provide no card information.
    D I S C L A I M E R

    My right to post information is protected under the rights for freedom act. In all instances, information discussed here on my posts are either hypothetical in nature, out of general curiosity, common knowledge, public knowledge, or role-play. Any use of the collective descriptions and shared knowledge from any of my posts are at the sole discretion of the reader. I am not responsible for what you do with it!

    Please help keep OpenViX online, donate HERE.
    Rules can be found
    HERE
    Support our sponsor World-Of-Satellite
    HERE
    GIGABLUE UHD QUAD 4K, VU+ DUO 4K SE, ZGEMMA H7S, VU+ UNO 4K SE
    Triax 1.1m Powered by TM2600, Fixed 28.2 Zone 2 dish with GT-SAT Unicable





  8. #8

    Title
    Junior Member
    Join Date
    Jun 2011
    Posts
    6
    Thanks
    3
    Thanked 0 Times in 0 Posts
    Ok afther a 4h off working with the last 709 VIX image

    im geting this on oscam

    2013/07/31 12:50:31 51DDE8 c (1802&004801/0000/025E/92:640AF4F6900AFFEF464968E6C8616D52): not found (50 ms)
    2013/07/31 12:50:32 51DDE8 c (1802&000000/0000/0384/92:936A72C6FB8867CDA71DD12336BC6A53): not found (50 ms)
    2013/07/31 12:50:35 51DDE8 c (1802&000000/0000/0321/92:63E0C6C3DDF32C075D5467FEF98D141A): not found (50 ms)
    2013/07/31 12:50:37 51DDE8 c (1802&000000/0000/0384/92:942EE8656EC5FC05B0F7C98B66882B18): not found (51 ms)
    2013/07/31 12:50:37 51DDE8 c (1802&000000/0000/0384/92:F770A2D1CA9AA73A86B5DEE4E4CB910E): not found (51 ms)
    2013/07/31 12:50:37 51DDE8 c (1802&000000/0000/0384/92:6F3F5BA9227979B500B5CB48227AF10A): not found (49 ms)
    2013/07/31 12:50:40 51DDE8 c (1802&000000/0000/032D/92:0F758151646DFCC8169246C6D821B8A8): not found (50 ms)
    2013/07/31 12:50:42 51DDE8 c (1802&000000/0000/0384/929199E68AEC34731826EC935D568A6E9): not found (49 ms)
    2013/07/31 12:50:42 51DDE8 c (1802&000000/0000/0384/92:E7507DCE950EBE5919DC8816F267FF6B): not found (51 ms)
    2013/07/31 12:50:44 51DDE8 c (1802&000000/0000/0384/92:245E68686169AC997FBD884AE97C033C): not found (49 ms)
    2013/07/31 12:50:47 51DDE8 c (1802&000000/0000/0384/92:CFC16E6DFD4684D85778499B295A7F65): not found (49 ms)
    2013/07/31 12:50:50 51DDE8 c (1802&000000/0000/0321/92:A33CA166918370306158E281B9BB5F9F): not found (49 ms)
    2013/07/31 12:50:50 51DDE8 c (1802&000000/0000/0384/92:E7507DCE950EBE5919DC8816F267FF6B): not found (0 ms)
    2013/07/31 12:50:52 51DDE8 c (1802&000000/0000/0384/92281DB6BD35CE932FC3BEBDDDAECB194): not found (49 ms)

    And if i restart oscam

    2013/07/31 12:54:52 0 s >> OSCam << cardserver started, version 1.20-unstable_svn, build r8639 (mipsel-unknown-linux-gnu)
    2013/07/31 12:54:52 0 s creating pidfile /tmp/.oscam/oscam.pid with pid 8904
    2013/07/31 12:54:52 0 s userdb reloaded: 2 accounts loaded, 0 expired, 0 disabled
    2013/07/31 12:54:52 0 s signal handling initialized
    2013/07/31 12:54:52 0 s 445 service-id's loaded in 7ms
    2013/07/31 12:54:52 0 s newcamd: initialized (fd=4, port=17100)
    2013/07/31 12:54:52 0 s -> CAID: 1802 PROVID: 000000, 004801, 004901
    2013/07/31 12:54:52 0 s newcamd: initialized (fd=5, port=17200)
    2013/07/31 12:54:52 0 s -> CAID: 0100 PROVID: 005211, 005221, 005225
    2013/07/31 12:54:52 0 s Cabo [internal] creating thread for device /dev/sci0
    2013/07/31 12:54:52 0 s loadbalancer: can't read from file /tmp/.oscam/stat
    2013/07/31 12:54:52 0 s waiting for local card init
    2013/07/31 12:54:52 519548 r [internal] Reader initialized (device=/dev/sci0, detect=cd, mhz=600, cardmhz=368)
    2013/07/31 12:54:52 5063E8 h webif: decompressed 52609 bytes back into 152072 bytes
    2013/07/31 12:54:52 5063E8 h HTTP Server listening on port 19600
    2013/07/31 12:55:50 519548 r [internal] ATR: 78 F8 08 00 F8 08 08 C8 F0 98 00 80 B0 88 50
    2013/07/31 12:55:50 519548 r [internal] ERROR: Could not read reader->convention
    2013/07/31 12:55:50 519548 r [internal] Error activating card.
    2013/07/31 12:55:51 519548 r [internal] ATR: 3F FF 95 00 FF 91 81 71 FE 47 00 44 4E 41 53 50 31 34 32 20 52 65 76 47 30 34 10
    2013/07/31 12:55:51 519548 r [internal] Init card protocol T1, FI=9, F=512, D=16, N=255
    2013/07/31 12:55:51 519548 r [internal] Calculated work ETU is 5.33 us
    2013/07/31 12:55:53 519548 r [internal] ATR Fsmax is: 5 Mhz, clocking card to 6.00
    2013/07/31 12:55:53 519548 r [internal] Card responded ok for ifsd request of 251
    2013/07/31 12:55:54 519548 r [internal] detect native nagra card
    2013/07/31 12:55:55 519548 r [internal] found card system nagra
    2013/07/31 12:55:55 519548 r [nagra] ROM: D N A S P 1 4 2
    2013/07/31 12:55:55 519548 r [nagra] REV: R e v G 0 4
    2013/07/31 12:55:55 519548 r [nagra] SER: ############
    2013/07/31 12:55:55 519548 r [nagra] CAID: 1802
    2013/07/31 12:55:55 519548 r [nagra] Prv.ID: 00 00 48 01 (sysid)
    2013/07/31 12:55:55 519548 r [nagra] Prv.ID: 00 00 00 00
    2013/07/31 12:55:55 519548 r [nagra] IRD ID: ############
    2013/07/31 12:55:55 519548 r [nagra] active to: 2013/08/28 12:59
    2013/07/31 12:55:55 519548 r [nagra] -----------------------------------------
    2013/07/31 12:55:55 519548 r [nagra] |id |tier |valid from |valid to |
    2013/07/31 12:55:55 519548 r [nagra] +----+--------+------------+------------+
    2013/07/31 12:55:55 519548 r [nagra] |4901|6B7E |2012/03/06 |2012/07/24 |
    2013/07/31 12:55:55 519548 r [nagra] |4901|01E2 |2003/01/01 |2003/01/01 |
    2013/07/31 12:55:55 519548 r [nagra] |4901|0270 |2003/01/01 |2003/01/01 |
    2013/07/31 12:55:55 519548 r [nagra] |4901|0338 |2003/01/01 |2003/01/01 |
    2013/07/31 12:55:55 519548 r [nagra] |4901|270C |2003/01/01 |2003/01/01 |
    2013/07/31 12:55:55 519548 r [nagra] |4901|2B2C |2003/01/01 |2003/01/01 |
    2013/07/31 12:55:55 519548 r [nagra] |4901|524E |2012/02/07 |2012/05/15 |
    2013/07/31 12:55:55 519548 r [nagra] |4901|3391 |2003/01/01 |2003/01/01 |
    2013/07/31 12:55:55 519548 r [nagra] |4901|3392 |2003/01/01 |2003/01/01 |
    2013/07/31 12:55:55 519548 r [nagra] |4901|3393 |2003/01/01 |2003/01/01 |
    2013/07/31 12:55:55 519548 r [nagra] |4901|3394 |2003/01/01 |2003/01/01 |
    2013/07/31 12:55:55 519548 r [nagra] |4901|3395 |2003/01/01 |2003/01/01 |
    2013/07/31 12:55:55 519548 r [nagra] |4901|3770 |2003/01/01 |2003/01/01 |
    2013/07/31 12:55:55 519548 r [nagra] |4901|4AB7 |2003/01/01 |2003/01/01 |
    2013/07/31 12:55:55 519548 r [nagra] |4901|5976 |2003/01/01 |2003/01/01 |
    2013/07/31 12:55:55 519548 r [nagra] |4901|7061 |2003/01/01 |2003/01/01 |
    2013/07/31 12:55:55 519548 r [nagra] |4901|7062 |2003/01/01 |2003/01/01 |
    2013/07/31 12:55:55 519548 r [nagra] |4901|7063 |2003/01/01 |2003/01/01 |
    2013/07/31 12:55:55 519548 r [nagra] |4901|7065 |2003/01/01 |2003/01/01 |
    2013/07/31 12:55:55 519548 r [nagra] -----------------------------------------
    2013/07/31 12:55:56 519548 r [nagra] ready for requests
    2013/07/31 12:55:56 0 s init for all local cards done
    2013/07/31 12:55:56 0 s anti cascading disabled
    2013/07/31 12:55:56 51E170 c client connected to XXXXX port
    2013/07/31 12:55:56 51E170 c anonymous disconnected from XXX.XXX.XXX.XXX
    2013/07/31 12:55:59 51FCE8 c client connected to XXXXX port
    2013/07/31 12:55:59 51FCE8 c encrypted newcamd:17100-client XXX.XXX.XXX.XXX granted (ace_pt, au=auto (1 reader))
    2013/07/31 12:55:59 51FCE8 c user authenticated successfully (CCcam)
    2013/07/31 12:55:59 51FCE8 c AU enabled for user XXXXX on reader Cabo
    2013/07/31 12:56:00 51FCE8 c (1802&000000/0000/0139/92:86C385FFD254658310FE3E7160E426F0): found (386 ms)
    2013/07/31 12:56:00 51FCE8 c (1802&000000/0000/032B/92:EFC310818CD23875D294E4219CE9814A): not found (219 ms)
    2013/07/31 12:56:02 51FCE8 c (1802&000000/0000/0384/92:219ED32B8AAFEB503C2788F57613C6EE): found (279 ms)
    2013/07/31 12:56:03 51FCE8 c (1802&000000/0000/0BEA/92:238B5034F77DBAFADD358C5E9AE13C8D): not found (219 ms)
    2013/07/31 12:56:03 51FCE8 c (1802&000000/0000/02CE/92:B6409CF298C415B62080CE9C968C91C6): found (380 ms)
    2013/07/31 12:56:04 51FCE8 c (1802&000000/0000/02CE/92:BCD5A59303F60E76ECB5122EECD4ED7F): found (379 ms)
    2013/07/31 12:56:06 51FCE8 c (1802&000000/0000/0321/92:97A29B27252FA3A012BD726E3D187C85): found (379 ms)
    2013/07/31 12:56:07 51FCE8 c (1802&000000/0000/0384/92:1BBC857E28447C994725A573B52CA2F2): found (279 ms)
    2013/07/31 12:56:08 51FCE8 c (1802&000000/0000/0067/92:AF6DD9AD62C0EA6180B31A74BCF1D926): not found (385 ms)
    2013/07/31 12:56:09 51FCE8 c (1802&000000/0000/032C/92:0AAF5A5D720A8FE75ECEEE5E6F2DBEA4): found (385 ms) by
    2013/07/31 12:56:10 51FCE8 c (1802&000000/0000/032D/92:9D8EB356A09E7A6A6FE005597A0B4591): found (389 ms) by
    2013/07/31 12:56:12 51FCE8 c (1802&000000/0000/0384/92:A30D55B4B64B7EEA08EE649AF17CE733): found (279 ms) by
    2013/07/31 12:56:13 51FCE8 c (1802&000000/0000/032E/92:009473F626D9C16D66CA22964CCACB0B): found (388 ms) by
    2013/07/31 12:56:13 51FCE8 c (1802&000000/0000/0BEA/92:593DC65F5744D3F63FFEBA982DF92DE3): not found (218 ms) by
    2013/07/31 12:56:15 51FCE8 c (1802&000000/0000/0139/92:AF1331DF87072763DD0C4DBDBA022EF7): found (381 ms) by
    2013/07/31 12:56:15 51FCE8 c (1802&000000/0000/0BD6/92:733011677EBAEC4D615C83A9E41F9D9D): not found (218 ms) by
    2013/07/31 12:56:16 51FCE8 c (1802&000000/0000/032B/92:EFC310818CD23875D294E4219CE9814A): not found (218 ms) by

    I have tested several configs, clockīs, upper and lower reader and bilds of oscam always the same problem
    Last edited by ace_pt; 31-07-13 at 13:13.

  9. #9
    Sicilian's Avatar
    Title
    The Boss
    Join Date
    Mar 2010
    Posts
    29,649
    Thanks
    23,585
    Thanked 26,054 Times in 7,638 Posts
    Are you 100% sure your configs are ok? Can you check with a Smargo connected to USB port?
    D I S C L A I M E R

    My right to post information is protected under the rights for freedom act. In all instances, information discussed here on my posts are either hypothetical in nature, out of general curiosity, common knowledge, public knowledge, or role-play. Any use of the collective descriptions and shared knowledge from any of my posts are at the sole discretion of the reader. I am not responsible for what you do with it!

    Please help keep OpenViX online, donate HERE.
    Rules can be found
    HERE
    Support our sponsor World-Of-Satellite
    HERE
    GIGABLUE UHD QUAD 4K, VU+ DUO 4K SE, ZGEMMA H7S, VU+ UNO 4K SE
    Triax 1.1m Powered by TM2600, Fixed 28.2 Zone 2 dish with GT-SAT Unicable





  10. #10
    Sicilian's Avatar
    Title
    The Boss
    Join Date
    Mar 2010
    Posts
    29,649
    Thanks
    23,585
    Thanked 26,054 Times in 7,638 Posts
    Found these configs, haven't got a card to test here, but I can submit logs for you.

    Code:
    http://www.satnigmo.com/45/tv-cabo-n3-oscam-config/
    D I S C L A I M E R

    My right to post information is protected under the rights for freedom act. In all instances, information discussed here on my posts are either hypothetical in nature, out of general curiosity, common knowledge, public knowledge, or role-play. Any use of the collective descriptions and shared knowledge from any of my posts are at the sole discretion of the reader. I am not responsible for what you do with it!

    Please help keep OpenViX online, donate HERE.
    Rules can be found
    HERE
    Support our sponsor World-Of-Satellite
    HERE
    GIGABLUE UHD QUAD 4K, VU+ DUO 4K SE, ZGEMMA H7S, VU+ UNO 4K SE
    Triax 1.1m Powered by TM2600, Fixed 28.2 Zone 2 dish with GT-SAT Unicable





  11. #11

    Title
    Senior Member
    Join Date
    Jun 2012
    Posts
    427
    Thanks
    119
    Thanked 135 Times in 105 Posts
    This sounds very much like an OSCAM config issue. If the link that Sicilian provided doesn't help, you may want to join and ask for help over at the official OSCAM forums:

    Code:
    http://www.streamboard.tv/wbb2/portal.php
    They'll want to see your exact configs and a full debug log.

    I would also recommend trying the latest v8789 (at time of posting) version of OSCAM. Precompiled binaries can be downloaded from this site:

    Code:
    http://download.oscam.cc/index.php?&direction=0&order=mod&directory=1.20_TRUNK/mips-tuxbox-oe2.0
    Last edited by chaser; 31-07-13 at 13:59.

  12. The Following User Says Thank You to chaser For This Useful Post:

    Sicilian (31-07-13)

  13. #12
    Sicilian's Avatar
    Title
    The Boss
    Join Date
    Mar 2010
    Posts
    29,649
    Thanks
    23,585
    Thanked 26,054 Times in 7,638 Posts
    I've had submitted to Venton private bug tracker too, to check this out.
    D I S C L A I M E R

    My right to post information is protected under the rights for freedom act. In all instances, information discussed here on my posts are either hypothetical in nature, out of general curiosity, common knowledge, public knowledge, or role-play. Any use of the collective descriptions and shared knowledge from any of my posts are at the sole discretion of the reader. I am not responsible for what you do with it!

    Please help keep OpenViX online, donate HERE.
    Rules can be found
    HERE
    Support our sponsor World-Of-Satellite
    HERE
    GIGABLUE UHD QUAD 4K, VU+ DUO 4K SE, ZGEMMA H7S, VU+ UNO 4K SE
    Triax 1.1m Powered by TM2600, Fixed 28.2 Zone 2 dish with GT-SAT Unicable





  14. #13

    Title
    Junior Member
    Join Date
    Jun 2011
    Posts
    6
    Thanks
    3
    Thanked 0 Times in 0 Posts
    Hi again i have tested with last oscam version and same result.
    im going to post the last configs used

    oscam.conf

    [global]
    logfile = stdout
    emmlogdir = /usr/keys/
    loghistorysize = 9999
    clienttimeout = 9000
    cachedelay = 100
    nice = -1
    maxlogsize = 200
    waitforcards = 0
    saveinithistory = 1
    lb_save = 100
    lb_min_ecmcount = 4
    lb_savepath = /usr/keys/oscam.stat

    [monitor]
    nocrypt = 127.0.0.1,192.168.0.0-192.168.255.255
    hideclient_to = 15
    appendchaninfo = 1

    [dvbapi]
    enabled = 0
    au = 1
    boxtype = dreambox
    user = dvbapi

    [webif]
    httpport = XXXXX
    httpuser = user
    httppwd = pwd
    httprefresh = 5
    httpallowed = 127.0.0.1,0.0.0.0-255.255.255.255
    #debug = 255

    [newcamd]
    key = 0102030405060708091011121314
    port = XXXXX@1802:000000,004801,004901;XXXXX@0100:05211,0 5221,05225
    keepalive = 1
    mgclient = 0

    oscam.server

    [reader]
    label = meo
    enable = 0
    protocol = internal
    device = /dev/sci1
    detect = cd
    cardmhz = 368
    mhz = 600
    blockemm-u = 0
    blockemm-s = 0
    blockemm-g = 1
    blockemm-unknown = 1
    group = 2
    emmcache = 1,1,2
    lb_weight = 500
    caid = 0100
    ident = 0100:05211,05221,05225

    [reader]
    label = cabo
    enable = 1
    protocol = internal
    device = /dev/sci0
    boxkey =
    rsakey =
    detect = cd
    cardmhz = 368
    mhz = 368
    blockemm-u = 0
    blockemm-s = 0
    blockemm-g = 1
    blockemm-unknown = 1
    group = 1
    emmcache = 1,1,2
    lb_weight = 500
    caid = 1802
    ident = 1802:000000,004801,004901

    oscam.user

    [account]
    user = user
    pwd = pwd
    uniq = 0
    group = 1
    au = 1
    keepalive = 1
    caid = 1802
    ident = 1802:000000,004801,004901

    Thats my last config

    Ps: this same config works with gigablue Quad, 800SE/UE DM 8000 and DM 800SE with all last versions of oscam since 85xx

    Regards
    Last edited by ace_pt; 01-08-13 at 00:46.

Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  
This website uses cookies
We use cookies to store session information to facilitate remembering your login information, to allow you to save website preferences, to personalise content and ads, to provide social media features and to analyse our traffic. We also share information about your use of our site with our social media, advertising and analytics partners.