How to flash a VU+ Duo using a USB stick

[matt 07]

On the the usb stick, you should have:

USBSTICK -> vuplus -> duo -> then all 5 files.

This is what I am doing, I put two new folders in my usb stick 1st vuplus and 2nd duo which is in the vuplus folder, I then extracted the update to the duo folder and ended up with 5 files, which are, imageversion, kernel_cfe_auto.bin, reboot.update, root_cfe_auto.jffs2, splash_cfe_auto.bin. which isn't the three that should be in there

[matt 07]

On the the usb stick, you should have:

USBSTICK -> vuplus -> duo -> then all 5 files.

This is what I am doing, I put two new folders in my usb stick 1st vuplus and 2nd duo which is in the vuplus folder, I then extracted the update to the duo folder and ended up with 5 files, which are, imageversion, kernel_cfe_auto.bin, reboot.update, root_cfe_auto.jffs2, splash_cfe_auto.bin. which isn't the three that should be in there

[judge]

There is no need to create any new folders, format the USB stick & extract the image onto it as it is.

[mickyblueys]

Have you tried a different USB stick.it may be incompatible.....or try placing it in a different USB slot on box.

Sent from my GT-I9100 using Tapatalk 2

[ronsmythe]

Any chance of an experienced member putting up a complete setup for Vu+Duo ready to put onto USB for first time initialising the box. Would be a great help to the less technical minded of us!!!

[mickyblueys]

Any chance of an experienced member putting up a complete setup for Vu+Duo ready to put onto USB for first time initialising the box. Would be a great help to the less technical minded of us!!!

Haven't you read post 1 by Sicilian?

Sent from my GT-I9100 using Tapatalk 2

[Larry-G]

as pointed out the very first post of this thread details exactly the process of flashing a Duo via a USB stick. Thats as detailed as is needed.

[stevesom]

as pointed out the very first post of this thread details exactly the process of flashing a Duo via a USB stick. Thats as detailed as is needed.

i think its number 2 and 3 can be a little confusing as it states to make directories and there is no need, last time i flashed the duo i was creating the directories and the box wouldnt update, when i just extracted the files to the usb without the directories, the directories stated in 2 and 3 were automatically generated when the file were extracted, hope this makes sense.

[tomhick02]

I'm trying to clear this in my own head so i can update my VU+ duo with out turning it into a brick!!

The instructions at the start of this thread is the way i flashed my VU 2 years ago but have read somewhere since that i need to update the 'Bootloader' before i install the latest image from here!!

http://www.world-of-satellite.com/sh...-OE3-0-Release

My current image is vix2.2 so i have never updated the bootloader,

the above image link has 4 files in it but no reference to bootloader, can someone help me please on where to find bootloader update file and how to do it please,,
was a big days work for me to update the last time which explains why im a bit aprehensive about it again!!
The above image link has

[mickyblueys]

The bootloader is in www.openvix.co.uk
The images are there too.

You flash the bootloader first and in the same way you would the image.

Sent from my GT-I9100 using Tapatalk 2

[Larry-G]

You can get the latest bootloader for your receiver from www.openvix.co.uk and flash it exactly the same way as you would a regular image.

Sent from my GT-I9300 using Tapatalk 2

[tomhick02]

Thanks Mickyblueys,

I now see 5 files in the folder, can i just put on usb and vu will automatically update bootloader,, forgive my ignorance on the subject!!
Thanks

Downloaded this one openvix-3.0.632-vuduo_usb.zip

[Larry-G]

Thanks Mickyblueys,

I now see 5 files in the folder, can i just put on usb and vu will automatically update bootloader,, forgive my ignorance on the subject!!
Thanks

Downloaded this one openvix-3.0.632-vuduo_usb.zip

Go to the openvix site and go to the bootloader section, for the duo you need the cfe.3.0 file. Flash this first and separate to the image.

Sent from my GT-I9300 using Tapatalk 2

[tomhick02]

Thanks for your help, ill have a root around for it now!

Cheers again.

[Larry-G]

New .pdf tutorial added to the first post.