hi philsat
i have just brought a vuduo2 and still getting my head around box please can you give me any tips on how to setup the lcd display or can i use your config
many thanks
froggie
hi philsat
i have just brought a vuduo2 and still getting my head around box please can you give me any tips on how to setup the lcd display or can i use your config
many thanks
froggie
D I S C L A I M E R
My right to post information is protected under the rights for freedom act. In all instances, information discussed here on my posts are either hypothetical in nature, out of general curiosity, common knowledge, public knowledge, or role-play. Any use of the collective descriptions and shared knowledge from any of my posts are at the sole discretion of the reader. I am not responsible for what you do with it!
Please help keep OpenViX online, donate HERE.
Rules can be found HERE
Support our sponsor World-Of-Satellite HERE
GIGABLUE UHD QUAD 4K, VU+ DUO 4K SE, ZGEMMA H7S, VU+ UNO 4K SE
Triax 1.1m Powered by TM2600, Fixed 28.2 Zone 2 dish with GT-SAT Unicable
Hi Guys.
I have had my VU+ DUO2 for a few days and the LCD goes blank after a few hours and the only way to get it back is to do a restart.
I have looked through all the settings but i could not see what will cause this.
Any help would be great
Cheers.
Hi,
Ehen you double click FR the display goes off. Did you double click? This can be turned of in the settings.
Ciao
Gesendet von meinem GT-P1000 mit Tapatalk
---
Sat:VU+ Ultimo4K/Solo4K/Duo2/2*Solo2/Ultimo
Remote: Harmony 200, 700, Link, Smart Control, Smart Companion, Elite, 2*Ultimate, Keyboard
Why on original image (and other images where have 0.8 version of plugin) i can't install 3.xx or the new 4.0 version of this plugin.
I ask because older version showing incorrectly picons on the lcd display (not all , but a lott).
piconssssss.jpg
IMAG0010.jpgIMAG0014.jpgIMAG0016.jpg
Last edited by nqkvotamime; 19-02-14 at 16:13.
I cant edit last post
Miss this pyhons
python-mutagen
python-subprocess
python-simpejson
lcd4lin erorr.jpg
From where can I get them download?
I have looked at ever button on my remote for the 'FR' button. Where is it?
When playing a recorded program the lcd is mixed up a little, How can I change it?
progress bar and time overlap, cannot find option in lcd4 linux.
Thank you
Hi,
FR = fast reverse, FF = fast forward
ciao
---
Sat:VU+ Ultimo4K/Solo4K/Duo2/2*Solo2/Ultimo
Remote: Harmony 200, 700, Link, Smart Control, Smart Companion, Elite, 2*Ultimate, Keyboard
Good morning dear friends
I have a question for you
I installed it on Vuduo 2 and am having trouble configuring LCD4linux
is possible to find a manual for this utility?
thank you.
Hi - can you help me I can't work out how to display a large picon or google downloaded image when viewing recorded media, i.e. using 'Show Cover'
The size option doesn't seem to scale the image it just moves it around (like I'm using position)
can somebody help me? config below
Code:config.MPDesc=0 config.MPNetAtmoCO2Station=1 config.MPCoverSizeH=100 config.FritzPictures=0 config.MPClock=0 config.StandbyHelligkeit3=1 config.StandbyHelligkeit2=1 config.ClockAnalog=1 config.MailLines=3 config.Info2Lines=1 config.TimerLines=1 config.MPCoverAlign=1 config.StandbyNetAtmoIDXStation=1 config.BilderJPEG=75 config.StandbyNetAtmoCO2Station=1 config.MPTitleLines=2 config.WetterRainColor2use=80 config.MPClock2Analog=1 config.ChannelLines=1 config.TunerPos=0 config.MPCoverGoogle=2 config.MPHelligkeit2=5 config.MPAVPos=200 config.CalListLines=3 config.FritzLineType=2 config.MPCalListLines=3 config.StandbyClockAnalog=1 config.MPTuner=0 config.StandbyClock2Analog=1 config.ProgLines=1 config.NetAtmoCO2Station=1 config.MPClock2Spacing=0 config.MPInfoLines=1 config.FritzLines=2 config.BilderJPEGQuick=60 config.StandbyNetAtmo2Station=1 config.Font=FONT config.StandbyInfoLines=1 config.Clock2Analog=1 config.FritzRemove=12 config.Clock=0 config.MPInfo2Lines=1 config.StandbyClockSpacing=0 config.NetAtmo2Station=1 config.MPMailLines=3 config.MPHelligkeit3=5 config.Helligkeit=5 config.MPClockAnalog=1 config.BilderBackground=1 config.Clock2Spacing=0 config.StandbyMailLines=3 config.MPCover=1 config.MPProgressPos=160 config.MPCoverPath1=/picon config.StandbyInfo2Lines=1 config.StandbyCalListLines=3 config.InfoLines=1 config.ElementThreads=2 config.StandbyHelligkeit=1 config.MPClockSpacing=0 config.NetAtmoIDXStation=1 config.MPDescLines=1 config.Helligkeit3=5 config.Helligkeit2=5 config.BilderQuality=2 config.MPCoverSize=300 config.DescLines=3 config.MPNetAtmoIDXStation=1 config.WebIfRefresh=3 config.StandbyNetAtmoStation=1 config.PiconSize=390 config.MPChannelLines=1 config.MPHelligkeit=5 config.StandbyTimerLines=1 config.WetterIconZoom=40 config.ClockSpacing=0 config.MPNetAtmo2Station=1 config.MPCommLines=3 config.CalLine=1 config.StandbyClock2Spacing=0 config.MPTimerLines=1 config.ProgNextLines=3 config.WetterExtraFeel=3 config.NetAtmoStation=1 config.MPNetAtmoStation=1 config.MPAV=1
Hello , i live in Belgium and i wanted to set up a second screen with Weather of my city but when i have to put the url i don't know what to set , i mean does every weather website url will works with my LCD Vu Duo 2 .
Same thing with the clocks , how can i set a design clock ?
Thanks
Hello guys.. i think i messed up my lcd4linux setting by fooling around to much... and now the tft display is black (it does not show anything)
does anyone have a original copy of the lcd4config file? so i can restore it to defaults?
Sorry for my english it's not my native language
Greetings Mark
maybe first try in browser : http://ipadressbox/lcd4linux/config
VU+ DUO2 quad tuner with HDD 1 TB + Latest Openvix and VU+ DUO2 FB tuner + Octagon SF8008 FB tuner
Triax 88 cm rotor single LNB 30 E- 40 W
1 Gibertini 1.00 m fixed - 3 quad LNB 19E-23.5E-28.2E