Any ideas folks on how I can fix an SID not found in PAT error...
This usually occurs when the frequency or transponder has changed for the channel in question, you need to either update your bouquet ( channel list ) manually or use one of the Automated bouquet creators such as the ABM plugin built into the ViX image.
My posts contain my own personal thoughts and opinions, they do not represent those of any organisation or group but my own.
If you don't like what I post, Don't read it.
SIMPLES.
Thanks Pheonix I tried to do a ABM scan but got [Cannot read data] therefore channel lists in EPG and Genre themselves mixed up combined with a lot of n<a's where Channels once were. Any ideas mateOriginally Posted by pheonix
what's your tuner setup ?.
My posts contain my own personal thoughts and opinions, they do not represent those of any organisation or group but my own.
If you don't like what I post, Don't read it.
SIMPLES.
Twin Tuner Uno set to 28.2e on fixed dish...is that what you mean mate?
so how exactly is the tuner setup in the tuner setup page and do both tuner inputs have their own feeds ?.
My posts contain my own personal thoughts and opinions, they do not represent those of any organisation or group but my own.
If you don't like what I post, Don't read it.
SIMPLES.
In Tuner Config page it says Tuner A:Vuplus DVB-S NIM (AVL6222) (DVB-S2) Single Sats 28.2 Eutelsat 28A & Astra 1N/2A/2F and exactly the same for Tuner B Phoenix..
open each tuner up by pressing ok on them and make sure both are set to.
simple
single
28.2 east
no
also can you confirm that both tuner inputs have their own feed from the LNB ?.
My posts contain my own personal thoughts and opinions, they do not represent those of any organisation or group but my own.
If you don't like what I post, Don't read it.
SIMPLES.
Yes they are both set up as you have written above mate...
tune to BBC1 and run ABM again to see if it makes a difference, if that still does not work try temporarily disabling tuner B then run ABM. Just trying to rule a few things out ( sorry i cant be much more help at present as i dont have one of these twin tuners with which to test, so i'm just guessing at the moment ).
My posts contain my own personal thoughts and opinions, they do not represent those of any organisation or group but my own.
If you don't like what I post, Don't read it.
SIMPLES.
Not at all mate I appreciate your time, will get back to you asap...
The ABM scan from BBC1 didn't work same error code [cannot read data]
Try temporarily disabling tuner B and see what if any differing results you get.
My posts contain my own personal thoughts and opinions, they do not represent those of any organisation or group but my own.
If you don't like what I post, Don't read it.
SIMPLES.
Hi mate disconnected Tuner B got Error code [Timeout for Tuner Lock] plus previous channels showing [SID not found in PAT]
Hi Phoenix any more ideas or suggestions how to fix above problems...
Posting Permissions
Reply With Quote
