Reflash a Max receiver

[roystheboy]

Hi no that dont work its still the same cheers

[roystheboy]

Hi what am I gonna do that looks complicated to me cheers

[marty]

Hi what am I gonna do that looks complicated to me cheers

Very easy!!!!!!! read it a couple of time and try it

[roystheboy]

Hi it says do it only if you have an image 668 or over mine is lower than that cheers

[marty]

Wait a sec I'm working on something for you

[marty]

OK this should sort you out

Step 1.
Create a folder on your Windows desktop and call it "test" or whatever you like.

1.jpg

Step 2.
unzip the image you downloaded earlier into that folder. It should look like this (see below)

2.jpg

Step 3.
Copy the folder from your desktop to your USB stick that is formatted in FAT32, it then should look like this

3.jpg

Step 4.
Reboot your box with the USB stick in it.

Step 5.
Once it has rebooted press the BLUE button on your remote and select "VIX"

Step 6.
Press "Image manager"

Step 7.
You will then see the folder called "test", select this and press OK (or the blue button that says "restore")


That's it

[roystheboy]

Hi I got to Image Manager pressed Image Manager but no folder called Test ,all I got is Device:/media/hdd/Freespace:1907MB select an Image to restore what am I doing wrong Ahh cheers

[marty]

Hi I got to Image Manager pressed Image Manager but no folder called Test ,all I got is Device:/media/hdd/Freespace:1907MB select an Image to restore what am I doing wrong Ahh cheers

No problem, while still on that screen press "MENU" on the remote.
The 1st line will say media/hdd or something like that, just simply press left or right to change it to media/usb

[roystheboy]

Hi it wont change I tried both left and right on the remote

[marty]

I don't have to time right now buts I'll make some screenshots for you later this afternoon
It does defo chance as I just tried it

[roystheboy]

Mine Is stuckon it I can move it up and down but it wont go left to right sorry

[josh_g]

exit out of all this and press the blue button to go to the vix menu. go to mount manager.

does the USB appear there?

[marty]

Step 1.
Reboot your box.

Step 2.
press the BLUE button on your remote and select "VIX"

Step 3.
Press "Image manager"

Step 4.
Press "Menu"

Step 5.
At the top it says backup location /media/hdd, press either left or right to change it to /media/usb then press the green button.
This works 100% I just tested it on two separate boxes

[marty]

exit out of all this and press the blue button to go to the vix menu. go to mount manager.

does the USB appear there?

Good idea, but take one step at a time

[roystheboy]

Sorry guts got to go out for a bit emergency cheers ill have a go later sorry take care Roy.