New Box arrived not working

**sinky50** · 11-06-13, 17:54

New box arrived next day delivery as promised. Read instruction and connected up and powered up. No indication on boxes display that its doing any thing but on tv i get the black start up screen saying get all your support at world of satelite. It stays on that screen, left it for 10 mins and powered down and back up still the same. Put USB stick in the back and switched on, all looks dead no signal on tv. Is this box duff?

Sinky

**sinky50** · 11-06-13, 18:07

Switched off at wall and left for a few mins put back on and booted to wizard but still nothing on the box display!!!

sinky

**shuggy** · 11-06-13, 18:19

are u able to configure anything sat tuner ect ?? set up

**Sicilian** · 11-06-13, 18:24

Disconnect the power and leave off for approx an hour, then power on again.

Sent from my iPhone using Tapatalk

**Larry-G** · 11-06-13, 18:28

You can very easily reflash the receiver if needed by reading this tutorial. also have you tried pressing the up / down buttons on the remote ??.

**Sicilian** · 11-06-13, 18:31

Be very carefully flashing the unit if the display is not showing. Leave it to flash a full 10 minutes if you do, but I would just totally unplug the power and leave off for an hour.

Sent from my iPhone using Tapatalk

**sinky50** · 11-06-13, 20:00

Got the box running now but still no display. left it unplugged for 30 mins.

sinky

**Sicilian** · 11-06-13, 20:10

Leave it powered off (mains power disconnected) overnight. See if it works when powered on in the morning.

Sent from my iPhone using Tapatalk

**sinky50** · 11-06-13, 22:03

reinstalled the latest image and now display is working, it'll take a wee while to get used to but it seem faster than the VU+Duo faster to reboot better display (now that i can see it Ha Ha)

On the whole it seems to be a very good box , good value for money.

thanks all for help Sinky

**sinky50** · 11-06-13, 22:05

Will the cool tv guide work on this box?

**Clabs** · 11-06-13, 22:50

I wouldn't bother with coolepg - Vix has a better EPG already built which will do everything you need (and more).

**sinky50** · 12-06-13, 09:47

Thanks, I'm still new to this box and have now found the Vix EPG and its very good, The display has gone on my box again and shows no life at all, can anyone recommend a fix or should I contact customer support?

Thanks Sinky

**Sicilian** · 12-06-13, 10:16

Do exactly as follows:

1) Flash new latest bootloader HERE, flash as a normal image, the unit will reboot automatically.
2) Re-flash the latest ViX image build 679 http://www.world-of-satellite.com/en...on-Unibox-HDx/
3) Directly after finishing the startup wizard upgrade the front panel firmware
3a) Menu > Plugins > Front Panel Update.
3b) Press GREEN button to upgrade.
3c) Press BLUE button download firmware.
3d) Firmware will be download and RHS500_Micom.bin will automatically be highlighted.
3e) Press OK and wait for the window that ask to confirm YES/NO, select Yes and wait for the receiver to reboot.

If VFD is working fine, that's good. If not leave fully mains powered off for 30mins. Completely unplug from the mains. Power on, if works great. If not contact WoS shop.

**sinky50** · 12-06-13, 11:16

Thanks for that I will try that later today as I've some work to do.

Sinky

**sinky50** · 13-06-13, 13:47

I've done all of the above, had a bit of a problem putting the latest image back on box till I read that you have to press the up key on box after power on with Image on USB. Then image loaded fine but still the front panel is dead.

Sinky

Thread: New Box arrived not working

Thread Tools

Display