Satellites

[roystheboy]

Hello Guys hope you can help ,I got a Max receiver with a 1.2 mtre dish I move the dish with a motor not connected to the receiver my problem is once I have moved the dish from say Astr to Hotbird with my motor I go to the Max receiver remote and press the down button then the blue button and move to Hotbird but it dont work ,I got to go into the menu to alter things to be able to get the Hotbird Sat ,on my Duo all I got to do is just press the down button on the remote then the blue then move to what ever sat I need .and in Sat Finder in the Max I got SNR 96 AGC nothing and BER nothing thats not right is it hope you can hel please take care best regards

[abu baniaz]

If I understand you correctly.......

MAX connected to dish with dish pointing to 28.2
Disconnect MAX receiver
Connect dish to DUO, move dish to 13.0
Disconnect DUO and reconnect MAX

Now you want to view 13.0 on the MAX? Can you say what the tuner settings are on the MAX?

[roystheboy]

Hi no the Duo is connected to the Dish I just want the Max to work on all sats cheers take care

[Larry-G]

so if i have this correct your using the duo to power the motor and have the maxdigital hooked up to a feed from the dish to receive channels from the satellite that your dish is pointing towards ?, now i'm no expert but i dont think that the correct way to go about things.

[roystheboy]

Thanks I just want to to watch whatever Satellite the Dish is pointing to on the Max whithout going into the menu all the time, there has to be a seting in the Max to be able to do this cheers thanks for replying cheers take care

[Larry-G]

I could be wrong but you have your setup on the maxdigital so it expects there to be a motor for it to turn and thats where your going wrong.

[roystheboy]

That sounds good to me how can I sort that out ,because if I only had the Max it should be able to go from Sat to Sat whithout going into the menu all the time ,hope you can sort it for me cheers take care

[Rob van der Does]

Do I understand correctly that you have one motor that you want to control from two boxes?
If so: there's only one (limited) way to do so: connect the dish to the Max, and the DUO to the loopthrough of the Max.
That way the DUO can controll the motor as long as the Max doesn't use it.

[Larry-G]

Do I understand correctly that you have one motor that you want to control from two boxes?
If so: there's only one (limited) way to do so: connect the dish to the Max, and the DUO to the loopthrough of the Max.
That way the DUO can controll the motor as long as the Max doesn't use it.

I believe he has the motor connected to the Duo and the Max to a spare feed from the LNB bypassing the motor.

[roystheboy]

Hi no I want the Duo to control everything its just I got three connections to my LNB two to the Duo and one to the Max ,the Max is in the bedroom I just want to receive on the Max what Satellite it is pointing to without going into the menu to alter things cheers

[Larry-G]

Hi no I want the Duo to control everything its just I got three connections to my LNB two to the Duo and one to the Max ,the Max is in the bedroom I just want to receive on the Max what Satellite it is pointing to without going into the menu to alter things cheers

The problem is your maxdigital expects there to be a motor for it to control and as this is not the case it won't work as you expect it to.

You could try robs suggestion but that also has limitations.


Sent from my iPad using Tapatalk HD

[Rob van der Does]

Hi no I want the Duo to control everything its just I got three connections to my LNB two to the Duo and one to the Max ,the Max is in the bedroom I just want to receive on the Max what Satellite it is pointing to without going into the menu to alter things cheers

Then I would not connect the Max to any LNB at all, but use the Remote Channel Converter: that way your Max is a client to the DUO and you can freely see everything, including recordings on the DUO's HDD.

[roystheboy]

Hi Thanks I wouldnt know how to do that cheers take care

[Rob van der Does]

Just install the plugin 'Remote Channel Converter' from the feeds and use it.
Both boxes must be connected to your home network.

[roystheboy]

Hi I got the Duo connected to my modem downstairs and the Max receiver is upstairs connected with belkin house plugs cheers