Satellites

[Larry-G]

Hi I got the Duo connected to my modem downstairs and the Max receiver is upstairs connected with belkin house plugs cheers

As long as there on the same network that's fine, your basically streaming the channels from one of the free tuners of the duo to the maxdigital including the full EPG etc.


Sent from my iPad using Tapatalk HD

[roystheboy]

Hi would I get all the channels on the Max from the Duo and all Sats as well if I connected it like you said still not sure how to do it cheers

[Rob van der Does]

Did you use the RCC plugin (hence downloaded bouquets from the server box)?
If so, remote bouquets will have been created which you can use the same way as local bouquets.

[roystheboy]

Hi the two boxes are on Vix Image is that O.K. thanks cheers

[Rob van der Does]

Hi the two boxes are on Vix Image is that O.K. thanks cheers

Yes .

[duoduo]

this method above, is it all done wireless then? So if i wanted to watch whats on in the front room on my reciever in bedroom i could if i install RCC on both boxes and no need for messy cables running around the house?

[Rob van der Does]

As I said: the plugin creates bouquets on your client box and you can use them for zapping just the same as if you were using the internal tuner.

[Larry-G]

as rob says the client receiver builds a bouquet list from the host receivers bouquets, when you access any of these new bouquets it basically logs into the host and "borrows" a spare tuner in the same was a a recording does and streams the channel you want to watch. This can be any channel you want and does not have to be the one that the host receiver is watching.

[duoduo]

Thanks for clearing that up, seems a much better solution than having to run cables off your main box. Anyone happen to know the cheapest (but reliable) box that would accomodate being able to do this? I assume it would need to linux enigma 2?

[Larry-G]

Thanks for clearing that up, seems a much better solution than having to run cables off your main box. Anyone happen to know the cheapest (but reliable) box that would accomodate being able to do this? I assume it would need to linux enigma 2?

any Enigma2 receiver will work and yes it must be a enigma2 receiver.

[offliner]

hi mate i know this post is quite old but in case you are still looking
this is very simple i use the same thing 1 box to control motor and others connected to same dish

all boxes that aren't controlling the motor should have the satellite setup for all satellites

for example on the satellite setup instead of having to setup which one you are now pointing the dish every time you turn it just set it up for all satellites

cheers