Flashing

[josh_g]

Believe it or not i have never flashed a receiver from scratch

i tried flashing my Twin this weekend but it just wont do it??? i followed the guide to the letter even used the HP format tool but it just wont pick up the flash.

i tried all USB ports on the receiver un-pluged everything part from the HDMI cable but i just dont get the 'OK' message to start the flash

i have also tried a number of USB sticks but no luck

Any ideas????

[Larry-G]

The only thing i missed out of the TM flashing tutorials was the bootloader part as its not always needed and should not be needed on newer boxes, download the bootloader from www.openvix.co.uk and flash that first its the same process as flashing the image.

[judge]

what's the directory structure on the USB stick?

[josh_g]

@pheonix im on the latest Image available by online updates so do i still need to do the bootloader?

@judge the folder structure is exactly the same as stated in the guide im at a proper loss on this one??

[abu baniaz]

If you downoad the bootloader, make sure you have the latest one 7/11/2012. It is not the one at the top (at the moment).

[Larry-G]

if your on the latest ViX image download the image via the image manager and restore that through the image manager.

[josh_g]

if your on the latest ViX image download the image via the image manager and restore that through the image manager.

i would like to start from scratch as im having a few niggly issues, will this give me a complete fresh install if done this way with no plugins skins ect?

[Larry-G]

i would like to start from scratch as im having a few niggly issues, will this give me a complete fresh install if done this way with no plugins skins ect?

if you flash the image from within the image manager with a freshly downloaded image it will be from scratch. give me a second and i'll do a quick walk through.

[Larry-G]

Blue button> ViX> Image manager.


Yellow button for downloads then green to download the image of your choice.
once the image has downloaded highlight it and press ok, you will be asked if you want to restore this image just select yes.

or if you cant download the image from the image manager, download from www.openvix.co.uk then place it on the USB stick in /imagebackups/ ( uncompressed first ) then install it from within the image manager.

[josh_g]

cheers pheonix i will give it a try tonight and see how i get on

[Larry-G]

dont forget when placing the image manually into the /imagebackups/ folder, you must keep the images name intact so it should look something like this.

( using a solo2 as a example )

/imagebackups/vusolo2-3.0.666/vuplus/( and the usual file in this folder ).

[Conaxthewarrior]

Ive just had the same experience with ny VU+ Duo. Initially I copied the data to a verbatium 4 Gb usb stick then , tried an ancient 256mb cruzer model - the VU+ Duo found the data & the image upgrade worked without a hitch!
Hope this shines some light.

[Larry-G]

Ive just had the same experience with ny VU+ Duo. Initially I copied the data to a verbatium 4 Gb usb stick then , tried an ancient 256mb cruzer model - the VU+ Duo found the data & the image upgrade worked without a hitch!
Hope this shines some light.

The duo's have always been a little iffy with USB sticks, even ones that have worked in the past. That said I have never had such a issue here yet with my two duo's.


Sent from my iPad using Tapatalk HD

[josh_g]

dont forget when placing the image manually into the /imagebackups/ folder, you must keep the images name intact so it should look something like this.

( using a solo2 as a example )

/imagebackups/vusolo2-3.0.666/vuplus/( and the usual file in this folder ).

tried downloading it from the box and wouldnt work, so i tried the second way i have got it to start flashing the image but its getting stuck at 36% then i get an error message "timeout elapsed"

[Rob van der Does]

tried downloading it from the box and wouldnt work, so i tried the second way i have got it to start flashing the image but its getting stuck at 36% then i get an error message "timeout elapsed"

On what build are you trying to restore? On build 666 and above you should not get that error any more.