hi i have just checked what version i am on as i was curious and im on build 632 kernel is 3.5.3 but where drivers is it says N/A-- how do i find the drivers for this box pls
hi i have just checked what version i am on as i was curious and im on build 632 kernel is 3.5.3 but where drivers is it says N/A-- how do i find the drivers for this box pls
if your on build 632 then your running the drivers dated 20.02.13 which are the last ones we received from TM.
My posts contain my own personal thoughts and opinions, they do not represent those of any organisation or group but my own.
If you don't like what I post, Don't read it.
SIMPLES.
how come it says n/a/ where the driver section is then thanks
no idea, to be honest.
last time i checked it did display them on mine, but not checked in several builds.
My posts contain my own personal thoughts and opinions, they do not represent those of any organisation or group but my own.
If you don't like what I post, Don't read it.
SIMPLES.
Twin also does not show details on info screen.
However, the driver dates is shown on vfd during startup. Unless you have a Single!
Jeepers, I just checked and I am on kernel version 3.1.1 and 4d version from 28/11/12. Anyone provide information on where and how to upgrade the kernel and the image please?
Sorry also, where do you find the build information?
latest 4D images for the TM-T2 should be downloaded on
latest ViX images onCode:http://download.for-better.biz/bbs/list.php?board=tm2toe
http://www.world-of-satellite.com/en...php?dir=TM-2T/
Both will come with latest kernel and drivers.
Menu -> Information -> About
ab25657 (20-03-13),abu baniaz (20-03-13)
Thanks guys. Another newbie question. I have been having awful problems with trying to update the latest image on my TM. I have tried the process in the sticky, but it keeps on bringing the 4d screen up and never let's me update. Also, FTP is a complete no no. It won't let me connect to the ip, but I can telnet or ssh Linux terminal in there... Any ideas where I am going wrong?
if memory serves you will first need to update the bootloader in order to move between 4D and ViX ( it's been a while since i last used 4D )/
My posts contain my own personal thoughts and opinions, they do not represent those of any organisation or group but my own.
If you don't like what I post, Don't read it.
SIMPLES.
Which image are you trying to flash?
and have you plugged out any other USB devices?
Turn box off put image on memory stick, plug memory stick into USB on front, with 1 hand start repeatedly pushing standby button on front of box turn box on at rear switch, wait for front of box to say found f/w, then hit ok, image should update.
Sent from my HTC Sensation Z710e using Tapatalk 2
There has only been one boot loader for 2T and Single.
The receiver will find firmware without button presses. (TM 800 needed standby to be pressed)