HHD Issues on Brand New Receiver

[sid786]

Hi Guys,

I have just purchased new receiver with built in 500 GB HD.

i am having issues trying to perform any sort of recording it gives error straight away ..
write error while recording disk full?

When i check mount manager, Disk is showing but "Not Mounted"

No Mount points defined.

When i try to define new mount points and change device as /mnt/hdd VIX Crashes.

when i try and to "Convert ext3 to ext4" It gets stuck at 80/100 "Waiting for Mount"

I hope i have not ended up with faulty hdd on the receiver....

Any help will be appreciated.

Thanks

[sid786]

When i try to initialise the HDD.

I get error

Initialising storage device...
Error:Timeout elapsed,sorry

[sid786]

WizardActions ok
valign must be either top, center or bottom!
[SKIN] No skin to read...
new Harddisk sda1 -> /dev/sda1 -> /dev/sda1
child has terminated
pipes closed
child has terminated
pipes closed
poll: unhandled POLLERR/HUP/NVAL for fd 55(16)
poll: unhandled POLLERR/HUP/NVAL for fd 59(17)
action -> ColorActions green
new Harddisk sda1 -> /dev/sda1 -> /dev/sda1
child has terminated
pipes closed
child has terminated
pipes closed
poll: unhandled POLLERR/HUP/NVAL for fd 54(16)
poll: unhandled POLLERR/HUP/NVAL for fd 59(17)
action -> SetupActions right
action -> SetupActions save
unknown action SetupActions/save! typo in keymap?
action -> ColorActions green
child has terminated
pipes closed
child has terminated
pipes closed
[MountManager] RESULT: /bin/sh: /sbin/blkid: not found

Traceback (most recent call last):
File "/usr/lib/enigma2/python/Tools/BoundFunction.py", line 9, in __call__
File "/usr/lib/enigma2/python/Components/Console.py", line 56, in finishedCB
File "/usr/lib/enigma2/python/Plugins/SystemPlugins/ViX/MountManager.py", line 366, in add_fstab
IndexError: list index out of range
(PyObject_CallObject(<Tools.BoundFunction.boundFun ction instance at 0x7370cb98>,(1,)) failed)
getResolvedKey config.plugins.crashlogautosubmit.sendAnonCrashlog failed !! (Typo??)
getResolvedKey config.plugins.crashlogautosubmit.addNetwork failed !! (Typo??)
getResolvedKey config.plugins.crashlogautosubmit.addWlan failed !! (Typo??)
]]>
</enigma2crashlog>
</crashlogs>
</openvix>


If it helps...

[Sicilian]

Do as follows: -

1) Factory reset.
2) Go through initial startup wizard and complete it.
3) Menu > Setup > System > Hard disk > Initialise.
4) Exit out of all screens and wait for pop up windows saying now playable media found...., then next window will say complete and press green button.
5) Press Blue Button > VIX > Mount manager, check HDD is mounted as /Media/HDD.

Also, what image version is on your receiver? Menu > Information > About.

[judge]

The top of that log with image & build number would also have been handy...

[sid786]

Performed factory reset.

Went through initialization again, got same error saying "Initialising storage device...
Error:Timeout elaped, sorry"

Image information is

Version:3.0
Model:- Technomate 2T
Kernel:3.5.3

[sid786]

<?xml version="1.0" encoding="utf-8"?>
<openvix>
<enigma2>
<crashdate>Wed Feb 6 18:16:45 2013</crashdate>
<compiledate>Feb 3 2013</compiledate>
<contactemail>andyblac@o2.co.uk</contactemail>
<!-- Please email this crashlog to above address -->
<skin>ViX-Night-HD/skin.xml</skin>
<sourcedate>2013-02-03</sourcedate>
<version>3.0.0</version>
</enigma2>
<image>
<stbmodel>duo</stbmodel>
<kernelversion>
<![CDATA[
Linux tm2t 3.5.3 #1 SMP Thu Dec 20 00:54:40 GMT 2012 mips GNU/Linux
]]>
</kernelversion>
<kernelcmdline>bmem=112M ubi.mtd=4 root=ubi0:rootfs rootfstype=ubifs rw console=ttyS0,115200n8 rootflags=sync slab_max_order=0 hwtypenum=0</kernelcmdline>
<nimsockets>NIM Socket 0:</nimsockets>
<imageversion>
<![CDATA[
box_type=tm2t
build_type=0
version=3.0
build=600
drivers=20121208
date=20130203165239
comment=ViX
target=9
creator=openViX
url=
catalog=
]]>
</imageversion>
<imageissue>

[Sicilian]

What build number?

[Sicilian]

Performed factory reset.

Went through initialization again, got same error saying "Initialising storage device...
Error:Timeout elaped, sorry"

Image information is

Version:3.0
Model:- Technomate 2T
Kernel:3.5.3

Are you sure the factory rest completed? Did it go back to the start up wizard?

[sid786]

Yes, i have lost all the bouquets etc and i had to re-configure tuners etc...

Went through the setup wizard..

[judge]

first log suggests /sbin/blkid isn't there?

[Finbarrbrady]

I am seeing a similar issue. Whenever I try and mount a usb device, my Vu Duo crashes with the following crash. The same happens with the built in hard drive. The only way I can get that to mount is to add this line to fstab:

/dev/sda1 /media/hdd auto defaults 0 0

I tried doing a full image restore but still the problem remains.

Here's the crash:

<?xml version="1.0" encoding="utf-8"?>
<openvix>
<enigma2>
<crashdate>Wed Feb 13 00:49:22 2013</crashdate>
<compiledate>Feb 3 2013</compiledate>
<contactemail>andyblac@o2.co.uk</contactemail>
<!-- Please email this crashlog to above address -->
<skin>ViX-Night-HD/skin.xml</skin>
<sourcedate>2013-02-03</sourcedate>
<version>3.0.0</version>
</enigma2>
<image>
<stbmodel>duo</stbmodel>
<kernelversion>
<![CDATA[
Linux vuduo 3.1.1 #1 SMP Sun Dec 23 15:59:24 GMT 2012 mips GNU/Linux
]]>
</kernelversion>
<kernelcmdline>bmem=112M ubi.mtd=0 root=ubi0:rootfs rootfstype=ubifs rw console=ttyS0,115200n8 rootflags=sync</kernelcmdline>
<nimsockets>NIM Socket 0:</nimsockets>
<imageversion>
<![CDATA[
box_type=vuduo
build_type=0
version=3.0
build=600
drivers=20130125
date=20130203174324
comment=ViX
target=9
creator=openViX
url=http://www.vuplus-support.co.uk
catalog=http://www.vuplus-support.co.uk
]]>
</imageversion>
<imageissue>
<![CDATA[
Welcome to OpenViX for %h
openvix 3.0 %h

]]>
</imageissue>
</image>
<software>
<enigma2software>
<![CDATA[
Collected errors:
* opkg_conf_load: Could not lock /var/lib/opkg/lock: Resource temporarily unavailable.
]]>
</enigma2software>
<vuplussoftware>
<![CDATA[
Collected errors:
* opkg_conf_load: Could not lock /var/lib/opkg/lock: Resource temporarily unavailable.
]]>
</vuplussoftware>
<gstreamersoftware>
<![CDATA[
Collected errors:
* opkg_conf_load: Could not lock /var/lib/opkg/lock: Resource temporarily unavailable.
]]>
</gstreamersoftware>
</software>
<crashlogs>
<enigma2crashlog>
<![CDATA[
s in Bouquet userbouquet.dbe0e.tv
loading bouquet... /etc/enigma2/userbouquet.dbe21.tv 1653
34 entries in Bouquet userbouquet.dbe21.tv
loading bouquet... /etc/enigma2/userbouquet.dbe0f.tv 1683
4 entries in Bouquet userbouquet.dbe0f.tv
loading bouquet... /etc/enigma2/userbouquet.dbe0b.tv 1687
38 entries in Bouquet userbouquet.dbe0b.tv
loading bouquet... /etc/enigma2/userbouquet.dbe1a.tv 1725
10 entries in Bouquet userbouquet.dbe1a.tv
loading bouquet... /etc/enigma2/userbouquet.dbe18.tv 1733
2 entries in Bouquet userbouquet.dbe18.tv
loading bouquet... /etc/enigma2/userbouquet.favourites.tv 1735
0 entries in Bouquet userbouquet.favourites.tv
24 entries in Bouquet bouquets.tv
loading bouquet... /etc/enigma2/bouquets.radio 1
loading bouquet... /etc/enigma2/userbouquet.ukcvs00.radio 1
65 entries in Bouquet userbouquet.ukcvs00.radio
loading bouquet... /etc/enigma2/userbouquet.fffff.radio 65
70 entries in Bouquet userbouquet.fffff.radio
loading bouquet... /etc/enigma2/userbouquet.favourites.radio 135
0 entries in Bouquet userbouquet.favourites.radio
3 entries in Bouquet bouquets.radio
[Time By]: Transponder
[Ipkg] Added to OPKG destinations: /
[FONT] adding font /usr/share/fonts/nmsbd.ttf...OK (Regular)
[FONT] adding font /usr/share/fonts/andale.ttf...OK (Fixed)
[FONT] adding font /usr/share/fonts/tuxtxt.ttf...OK (Console)
[FONT] adding font /usr/share/fonts/ae_AlMateen.ttf...OK (Replacement)
[FONT] adding font /usr/share/fonts/valis_enigma.ttf...OK (Enigma)
[SKIN] loading include: Skin_ExtPlugins.xml
[FONT] adding font /usr/share/enigma2/ViX-Common/fonts/Roboto-Bold.ttf...OK (Regular)
[FONT] adding font /usr/share/enigma2/ViX-Common/fonts/Roboto-BoldItalic.ttf...OK (Italic)
[FONT] adding font /usr/share/enigma2/ViX-Common/fonts/Roboto-Black.ttf...OK (Bold)
[FONT] adding font /usr/share/enigma2/ViX-Common/fonts/Roboto-BlackItalic.ttf...OK (Boldit)
[FONT] adding font /usr/share/fonts/nmsbd.ttf...OK (Subtitlefont)
[FONT] adding font /usr/share/fonts/lcd.ttf...OK (LCD)
[FONT] adding font /usr/share/fonts/ae_AlMateen.ttf...OK (Replacement)
[FONT] adding font /usr/share/fonts/tuxtxt.ttf...OK (Console)
[FONT] adding font /usr/share/fonts/valis_enigma.ttf...OK (Subs)
[FONT] adding font /usr/share/fonts/nmsbd.ttf...OK (FdLcD)
[iInputDevices] getInputDevices <ERROR: ioctl(EVIOCGNAME): [Errno 25] Inappropriate ioctl for device >
[iInputDevices] getInputDevices <ERROR: ioctl(EVIOCGNAME): [Errno 25] Inappropriate ioctl for device >
Activating keymap: Default (US)
Activating language English (UK)
--> setting scaler_sharpness to: 0000000D
[EPGC Loads] Poller enabled.
[EPGC Save] Poller disabled.
[EPGC] setCacheFile read/write epg data from/to '/etc/enigma2/epg.dat'
[EPGC] time updated.. start EPG Mainloop
couldn't open /proc/stb/misc/12V_output
setLCDBrightness 25
setLCDBrightness 127
Setting OSD position:18 684 13 550
Setting 3D mode: auto
Setting 3D depth: 50
Setting OSD alpha: 255
[EPGC Save] Poller disabled.
[EPGC Loads] Poller enabled.
FIXME: request for unknown slot
FIXME: request for unknown slot
[Foreca Ver. 3.0.7] Debug disabled
[Foreca Ver. 3.0.7] Collating sequence undeterminable; default used
[Foreca Ver. 3.0.7] Setup...
[EPGC] 113015 events read from /etc/enigma2/epg.dat
Plugin Extensions/WebInterface failed to load: No module named plugin
Plugin probably removed, but not cleanly in /usr/lib/enigma2/python/Plugins/Extensions/WebInterface
trying to remove: /usr/lib/enigma2/python/Plugins/Extensions/WebInterface
Plugin Extensions/TSpanel failed to load: Bad magic number in /usr/lib/enigma2/python/Plugins/Extensions/TSpanel/__init__.pyo
Traceback (most recent call last):
File "/usr/lib/enigma2/python/Components/PluginComponent.py", line 53, in readPluginList
File "/usr/lib/enigma2/python/Tools/Import.py", line 2, in my_import
ImportError: Bad magic number in /usr/lib/enigma2/python/Plugins/Extensions/TSpanel/__init__.pyo
--> setting contrast to: 00008000
--> setting saturation to: 00008000
--> setting hue to: 00008000
--> setting brightness to: 00008000
--> setting block_noise_reduction to: 00000000
--> setting mosquito_noise_reduction to: 00000000
--> setting digital_contour_removal to: 00000000
--> setting splitmode to: off
--> setting sharpness to: 00000000
--> setting auto_flesh to: 00000000
--> setting green_boost to: 00000000
--> setting blue_boost to: 00000000
--> setting dynamic_contrast to: 00000000
--> setting color_soace to: Edid(Auto)
--> applying pep values
getModeList for port DVI-PC
getModeList for port YPbPr
getModeList for port Scart
getModeList for port DVI-PC
getModeList for port DVI
hotplug on dvi
-> setting aspect, policy, policy2, wss 16:9 panscan panscan auto
-> setting aspect, policy, policy2, wss 16:9 panscan panscan auto
-> setting aspect, policy, policy2, wss 16:9 panscan panscan auto
-> setting aspect, policy, policy2, wss 16:9 panscan panscan auto
setMode - port: DVI mode: 1080i rate: 50Hz
-> setting aspect, policy, policy2, wss 16:9 panscan panscan auto
[XMLTVImport] autostart (0) occured at 1360716527.78
[AutoTimer] Auto Poll Enabled
[SoftcamManager] AutoStart Enabled
[CI_Assignment] activating ci configs:
[CI_Activate] FOUND 2 CI Slots
[CI_Activate_Config_CI0] no config file found
[CI_Activate_Config_CI0] error parsing xml...
[CI_Activate_Config_CI1] no config file found
[CI_Activate_Config_CI1] error parsing xml...
starting hotplug handler
[Timer] Record RecordTimerEntry(name=Football Focus, begin=Sat Feb 16 12:12:00 2013, serviceref=1:0:19:1B1D:802:2:11A0000:0:0:0:, justplay=0)
[Timer] Record RecordTimerEntry(name=Dynamo: Magician Impossible, begin=Thu Feb 7 20:57:00 2013, serviceref=1:0:19:EE2:7E9:2:11A0000:0:0:0:, justplay=1)
[Timer] Record RecordTimerEntry(name=Des Bishop: Under the Influence, begin=Thu Feb 7 22:12:00 2013, serviceref=1:0:1:2581:7FB:2:11A0000:0:0:0:, justplay=0)
[Timer] Record RecordTimerEntry(name=Tron Legacy, begin=Fri Feb 8 18:50:00 2013, serviceref=1:0:19:EE9:7E8:2:11A0000:0:0:0:, justplay=1)
[Timer] Record RecordTimerEntry(name=Football Focus, begin=Sat Feb 9 12:12:00 2013, serviceref=1:0:19:1B1D:802:2:11A0000:0:0:0:, justplay=0)
[Timer] Record RecordTimerEntry(name=The Jonathan Ross Show, begin=Sat Feb 9 21:17:00 2013, serviceref=1:0:19:2710:801:2:11A0000:0:0:0:, justplay=0)
[Timer] Record RecordTimerEntry(name=Take Me Out, begin=Sat Feb 9 20:02:00 2013, serviceref=1:0:19:2710:801:2:11A0000:0:0:0:, justplay=0)
[Timer] Record RecordTimerEntry(name=RBS Six Nations Live, begin=Sun Feb 10 14:12:00 2013, serviceref=1:0:19:2588:7FB:2:11A0000:0:0:0:, justplay=0)
[Timer] Record RecordTimerEntry(name=takemeoutireland, begin=Fri Feb 15 21:00:00 2013, serviceref=1:0:1:2585:7FB:2:11A0000:0:0:0:, justplay=0, Disabled)
[ImageManager] AutoStart Enabled
[ImageManager] Backup Schedule Disabled at (now=Wed 13 Feb 2013 00:48:48 GMT)
[BackupManager] AutoStart Enabled
[BackupManager] Backup Schedule Disabled at (now=Wed 13 Feb 2013 00:48:48 GMT)
[AutoBouquetsMaker] AutoStart Enabled
[AutoBouquetsMaker] AutoBouquetsMaker Schedule Disabled at Wed 13 Feb 2013 00:48:48 GMT
[XMLTVImport] autostart (0) occured at 1360716528.12
[XMLTVImport] WakeUpTime now set to -1 (now=1360716528)
[ePNG] couldn't open /usr/share/enigma2/skin_default/icons/dvb-s.png
[ePNG] couldn't open /usr/share/enigma2/skin_default/icons/dvb-c.png
[ePNG] couldn't open /usr/share/enigma2/skin_default/icons/dvb-t.png
[ePNG] couldn't open /usr/share/enigma2/skin_default/ico_service_group.png
RemovePopup, id = ZapError
[Skin] Attribute not implemented: alphatest value: blend
setValue 100
Setvolume: 100 100 (raw)
Setvolume: 0 0 (-1db)
Setvolume: 100 100 (raw)
Setvolume: 0 0 (-1db)
[LogManager] Poll Started
playing 1:0:19:EF3:7F1:2:11A0000:0:0:0:
[LogManager] probing folders
RemovePopup, id = ZapError
allocate channel.. 07f1:0002
opening frontend 0
[LogManager] found following log's: ['/home/root/logs']
[LogManager] looking in: /home/root/logs
(0)tune
RotorCmd ffffffff, lastRotorCmd ffffffff
prepare_sat System 1 Freq 12343500 Pol 0 SR 29500000 INV 2 FEC 3 orbpos 282 system 1 modulation 1 pilot 2, rolloff 0
tuning to 1743 mhz
OURSTATE: tuning
allocate Channel: res 0
[eDVBCIInterfaces] addPMTHandler 1:0:19:EF3:7F1:2:11A0000:0:0:0:
allocate demux
eHdmiCEC: received message 46
child has terminated
pipes closed
child has terminated
pipes closed
poll: unhandled POLLERR/HUP/NVAL for fd 33(16)
poll: unhandled POLLERR/HUP/NVAL for fd 35(16)
child has terminated
pipes closed
poll: unhandled POLLERR/HUP/NVAL for fd 40(16)
[SEC] set static current limiting
eHdmiCEC: received message 8C
[SEC] invalidate current switch params
eHdmiCEC: received message
[SEC] setVoltage 2
[SEC] sleep 10ms
child has terminated
pipes closed
0.0.0.0
[LogManager] /home/root/logs: bytesToRemove -10192706
192.168
[OpenWebif] hooking original webif plugins
[OpenWebif] loading external plugins...
[OpenWebif] no plugins to load
[OpenWebif] started on 80
[OpenWebif] started on 443
poll: unhandled POLLERR/HUP/NVAL for fd 35(16)
job Components.Task.Job name=LogManager #tasks=1 completed with [] in None
executing opkg --add-dest /:/ update
job Components.Task.Job name=OnlineVersionCheck #tasks=1 completed with [] in None
[EPGC] Refreshing EPGCache.
main thread is non-idle! display spinner!
[EPGC] 113015 events read from /etc/enigma2/epg.dat
[SEC] setTone 1
eHdmiCEC: received message
job Components.Task.Job name=EPG Cache Check #tasks=2 completed with [] in None
[SEC] sleep 10ms
[SEC] update current switch params
[SEC] startTuneTimeout 5000
[SEC] setFrontend 1
setting frontend 0
(0)fe event: status 0, inversion on, m_tuning 1
[SEC] sleep 500ms
(0)fe event: status 1f, inversion on, m_tuning 2
OURSTATE: ok
[eDVBLocalTimerHandler] channel 0x744374e0 running
[eEPGCache] channel 0x744374e0 running
stop release channel timer
[EPGC] next update in 2 sec
ok ... now we start!!
eventNewProgramInfo 0 0
have 1 video stream(s) (0202), and 1 audio stream(s) (0296), and the pcr pid is 0202, and the text pid is 0901
allocate demux
decoder state: play, vpid=514, apid=662
DMX_SET_PES_FILTER(0x202) - pcr - ok
DEMUX_START - pcr - ok
DMX_SET_PES_FILTER(0x296) - audio - ok
DEMUX_START - audio - ok
AUDIO_SET_BYPASS(0) - ok
AUDIO_PAUSE - ok
AUDIO_PLAY - ok
Video Device: /dev/dvb/adapter0/video0
demux device: /dev/dvb/adapter0/demux0
VIDEO_SET_STREAMTYPE 1 - ok
DMX_SET_PES_FILTER(0x202) - video - ok
DEMUX_START - video - ok
VIDEO_FREEZE - ok
VIDEO_PLAY - ok
DMX_SET_PES_FILTER(0x901) - ttx - ok
DEMUX_START - ttx - ok
VIDEO_SLOWMOTION(0) - ok
VIDEO_FAST_FORWARD(0) - ok
VIDEO_CONTINUE - ok
AUDIO_CONTINUE - ok
AUDIO_CHANNEL_SELECT(0) - ok
disable teletext subtitles
[eDVBCAService] new service 1:0:19:EF3:7F1:2:11A0000:0:0:0:
[eDVBCAService] add demux 0 to slot 0 service 1:0:19:EF3:7F1:2:11A0000:0:0:0:
[SEC] set dynamic current limiting
VIDEO_GET_EVENT - ok
VIDEO_GET_EVENT - ok
PATready
use pmtpid 0105 for service_id 0ef3
eventNewProgramInfo 0 0
have 1 video stream(s) (0202), and 2 audio stream(s) (0282, 0296), and the pcr pid is 0202, and the text pid is 0901
decoder state: play, vpid=514, apid=662
[eDVBCIInterfaces] gotPMT
action -> InfobarActions showMovies
[EPGC] start caching events(1360716538)
VIDEO_GET_EVENT - ok
VIDEO_GET_EVENT - ok
[SoftcamManager] CCcam_230 already running
[SoftcamManager] Telnet info not allowed, can not check if frozen
job Components.Task.Job name=SoftcamCheck #tasks=1 completed with [] in None
sdt update done!
action -> OkCancelActions cancel
[eDVBCAService] free slot 0 demux 0 for service 1:0:19:EF3:7F1:2:11A0000:0:0:0:
[eDVBCAService] free service 1:0:19:EF3:7F1:2:11A0000:0:0:0:
decoder state: play, vpid=-1, apid=-1
DEMUX_STOP - pcr - ok
DEMUX_STOP - video - ok
VIDEO_STOP - ok
AUDIO_STOP - ok
DEMUX_STOP - audio - ok
AUDIO_CONTINUE - ok
DEMUX_STOP - ttx - ok
start release channel timer
playing 1:0:19:EF3:7F1:2:11A0000:0:0:0:
RemovePopup, id = ZapError
use cached_channel
stop release channel timer
allocate Channel: res 0
[eDVBCIInterfaces] addPMTHandler 1:0:19:EF3:7F1:2:11A0000:0:0:0:
ok ... now we start!!
eventNewProgramInfo 0 0
have 1 video stream(s) (0202), and 1 audio stream(s) (0296), and the pcr pid is 0202, and the text pid is 0901
decoder state: play, vpid=514, apid=662
DMX_SET_PES_FILTER(0x202) - pcr - ok
DEMUX_START - pcr - ok
DMX_SET_PES_FILTER(0x296) - audio - ok
DEMUX_START - audio - ok
AUDIO_SET_BYPASS(0) - ok
AUDIO_PAUSE - ok
AUDIO_PLAY - ok
Video Device: /dev/dvb/adapter0/video0
demux device: /dev/dvb/adapter0/demux0
VIDEO_SET_STREAMTYPE 1 - ok
DMX_SET_PES_FILTER(0x202) - video - ok
DEMUX_START - video - ok
VIDEO_FREEZE - ok
VIDEO_PLAY - ok
DMX_SET_PES_FILTER(0x901) - ttx - ok
DEMUX_START - ttx - ok
VIDEO_SLOWMOTION(0) - ok
VIDEO_FAST_FORWARD(0) - ok
VIDEO_CONTINUE - ok
AUDIO_CONTINUE - ok
disable teletext subtitles
[eDVBCAService] new service 1:0:19:EF3:7F1:2:11A0000:0:0:0:
[eDVBCAService] add demux 0 to slot 0 service 1:0:19:EF3:7F1:2:11A0000:0:0:0:
PATready
use pmtpid 0105 for service_id 0ef3
eventNewProgramInfo 0 0
have 1 video stream(s) (0202), and 2 audio stream(s) (0282, 0296), and the pcr pid is 0202, and the text pid is 0901
decoder state: play, vpid=514, apid=662
[eDVBCIInterfaces] gotPMT
[eDVBCAService] don't build/send the same CA PMT twice
[eDVBLocalTimerHandler] diff is 0
[eDVBLocalTimerHandler] diff < 120 .. use Transponder Time
[eDVBLocalTimerHandler] not changed
action -> InfobarExtensions extensions
action -> WizardActions up
action -> WizardActions up
action -> WizardActions ok
eHdmiCEC: received message
[EPGC] abort non avail schedule reading
[EPGC] abort non avail schedule other reading
[EPGC] abort non avail netmed schedule reading
[EPGC] abort non avail netmed schedule other reading
[EPGC] abort non avail FreeSat schedule_other reading
[EPGC] abort non avail viasat reading
[EPGC] nownext finished(1360716545)
[EPGC] stop caching events(1360716545)
[EPGC] next update in 60 min
action -> WizardActions down
unknown action WizardActions/down! typo in keymap?
action -> WizardActions down
unknown action WizardActions/down! typo in keymap?
action -> WizardActions down
unknown action WizardActions/down! typo in keymap?
action -> WizardActions ok
valign must be either top, center or bottom!
[SKIN] No skin to read...
new Harddisk sda1 -> /dev/sda1 -> /dev/sda1
new Harddisk sdb1 -> /dev/sdb1 -> /dev/sdb1
child has terminated
pipes closed
child has terminated
pipes closed
child has terminated
pipes closed
poll: unhandled POLLERR/HUP/NVAL for fd 64(17)
child has terminated
pipes closed
poll: unhandled POLLERR/HUP/NVAL for fd 67(17)
poll: unhandled POLLERR/HUP/NVAL for fd 70(17)
poll: unhandled POLLERR/HUP/NVAL for fd 73(17)
action -> ColorActions blue
new Harddisk sda1 -> /dev/sda1 -> /dev/sda1
new Harddisk sdb1 -> /dev/sdb1 -> /dev/sdb1
action -> MsgBoxActions cancel
child has terminated
pipes closed
child has terminated
pipes closed
child has terminated
pipes closed
poll: unhandled POLLERR/HUP/NVAL for fd 64(17)
child has terminated
pipes closed
poll: unhandled POLLERR/HUP/NVAL for fd 67(17)
poll: unhandled POLLERR/HUP/NVAL for fd 70(17)
poll: unhandled POLLERR/HUP/NVAL for fd 73(17)
action -> ColorActions green
new Harddisk sda1 -> /dev/sda1 -> /dev/sda1
new Harddisk sdb1 -> /dev/sdb1 -> /dev/sdb1
child has terminated
pipes closed
child has terminated
pipes closed
poll: unhandled POLLERR/HUP/NVAL for fd 63(17)
child has terminated
pipes closed
poll: unhandled POLLERR/HUP/NVAL for fd 67(17)
poll: unhandled POLLERR/HUP/NVAL for fd 70(17)
action -> SetupActions right
eHdmiCEC: received message
action -> SetupActions save
unknown action SetupActions/save! typo in keymap?
action -> ColorActions green
child has terminated
pipes closed
child has terminated
pipes closed
[MountManager] RESULT: /bin/sh: /sbin/blkid: not found

Traceback (most recent call last):
File "/usr/lib/enigma2/python/Tools/BoundFunction.py", line 9, in __call__
File "/usr/lib/enigma2/python/Components/Console.py", line 56, in finishedCB
File "/usr/lib/enigma2/python/Plugins/SystemPlugins/ViX/MountManager.py", line 366, in add_fstab
IndexError: list index out of range
(PyObject_CallObject(<Tools.BoundFunction.boundFun ction instance at 0x74463120>,(1,)) failed)
getResolvedKey config.plugins.crashlogautosubmit.sendAnonCrashlog failed !! (Typo??)
getResolvedKey config.plugins.crashlogautosubmit.addNetwork failed !! (Typo??)
getResolvedKey config.plugins.crashlogautosubmit.addWlan failed !! (Typo??)
]]>
</enigma2crashlog>
</crashlogs>
</openvix>