I've got a usb stickk A867 for terrestrial channels.
Which software do I need to use it on Vu+solo2 Vix Image?
Thks.
I've got a usb stickk A867 for terrestrial channels.
Which software do I need to use it on Vu+solo2 Vix Image?
Thks.
Any help/info on this subject please? Thks.
Hi there. For instruction on how to install on VIX go here
http://www.world-of-satellite.com/showpost.php?p=137507
But be warned I've encountered issues by using the A867. As reported here:
http://www.world-of-satellite.com/showpost.php?p=173008
So please let us know how it goes for you
3 x VU+ DUO+Internal WD Caviar Blu 500GB+Magic-HD-Noire+CCcam2.3.0
Thanks very much for your reply. Will try it later on this week as I,m away atm.
The A867 does not work even on ET6500 with the last VIX ...
What to do?
poor man is not he who has little, but who need much indefinitely ....
Thanks for the reply, but I solved by changing in lib/firmware the file dvb-usb-af9035-01.fw with the file dvb-usb-af9035-02.fw.
If you allow me I put it online.
poor man is not he who has little, but who need much indefinitely ....
Interesting, where did you find that firmware version? I'm wondering if that could be used on Vu+ receiver too.
So lemme try to understand: you installed the dvb-usb-af9035-01.fw from feed and then manually replaced it with the 02 version? Is that rite?
Just make a little test: If you restart enigma2 does the DVBT tuner still work?
3 x VU+ DUO+Internal WD Caviar Blu 500GB+Magic-HD-Noire+CCcam2.3.0
Yes, it is ...
Now the A867 works
poor man is not he who has little, but who need much indefinitely ....
So please share here the 02 I'll test on my duo
3 x VU+ DUO+Internal WD Caviar Blu 500GB+Magic-HD-Noire+CCcam2.3.0
Larry-G (30-01-13)
OK..
Code:http://bayfiles.com/file/CTyf/doH1DA/dvb-usb-af9035-02.fw
I tested it on Xtrend ET6500.....
Last edited by DRAGO.NET; 29-01-13 at 22:23. Reason: code link
poor man is not he who has little, but who need much indefinitely ....
Larry-G (30-01-13)
when "replacing" did you just remove the 01 and put the 02. Or did you then rename the 02 to match 01?
3 x VU+ DUO+Internal WD Caviar Blu 500GB+Magic-HD-Noire+CCcam2.3.0
not working for me on DUO.
I did install from the plugin's feed dvb-usb-af9035-01.fw
Removed the dvb-usb-af9035-01.fw from lib/firmware and uploaded the dvb-usb-af9035-02.fw you provided. Changed permission to 644 and tryed both leaving the name as is and changing it to match dvb-usb-af9035-01.fw.
Everytime I rebooted but the tuner was not showed.
And here's the terminal report:
Code:dmesg | grep dvb dvb_bcm7335: module license 'Proprietary' taints kernel. lsusb Bus 001 Device 001: ID 1d6b:0002 Bus 002 Device 001: ID 1d6b:0002 Bus 003 Device 001: ID 1d6b:0001 Bus 004 Device 001: ID 1d6b:0001 Bus 001 Device 002: ID 05e3:0608 Bus 001 Device 004: ID 07ca:a867 lsmod Module Size Used by ipv6 346460 12 brcmfb 1127 2 dvb_bcm7335 4943401 32 brcmfb procmk 1397 1 dvb_bcm7335
3 x VU+ DUO+Internal WD Caviar Blu 500GB+Magic-HD-Noire+CCcam2.3.0