Does anyone have a good image/settings combo for the TM 2T?

[Wayno1979]

so, what's showing up in the debug logs?
is there anything sitting above the box?

When running OpenVix I had a few crashes which were logged and related to webinterface plugin not being found, not something I installed, and other various issues which I emailed from the box. After the random reboots I always checked the logs but 9/10 times there wasn't any new ones so couldn't figure out a reason

Couldn't find the logs on the 4D image

The box is on top of the TV unit with nothing on top or near it

[Jony]

Well after finally thinking the problems were solved I turned on the box from standby this morning and no HDMI signal again, to say I am pi$$ed off is an understatement!

Tried restarting, nothing, turned off from the back and left a few minutes, nothing.

Unplugged everything, followed TMFAN's advice and flashed latest 4D image, nothing but reboots for about 5 minutes then it settled down and after 5 minutes HDMI signal came back, zapped to ITV and after 2 mins box restarted and got stuck in a loop of restarting, showing ITV for 30 seconds then rebooting again, tried different channels but the same result.

Flashed 4D image from 10/11/2012 as this was the only image that has been semi stable for me,was OK for an hour or so but now I'm back to getting random reboots.
Looks like Christmas with no TV, wife and daughter will be so pleased.....
Guess I will be sending it back

Last post you wrote by disconnecting one Lnb cable rebooting stop.
Rebooting is back may be same cable still connected.
Disconnect faulty cable and try to push very hard your hdmi cable .
Tm-2t do not have any history of re booting unless external short/Had disk/Lnb cabel/USB/faulty hdmi cabel/faulty scart cabel/any external connection can create re booting otherwise it will damage the box.
Finally ring tm or send an email to info@technomate.com they might have solution or replacement if this box if it is faulty.

[Wayno1979]

Last post you wrote by disconnecting one Lnb cable rebooting stop.
Rebooting is back may be same cable still connected.
Disconnect faulty cable and try to push very hard your hdmi cable .
Tm-2t do not have any history of re booting unless external short/Had disk/Lnb cabel/USB/faulty hdmi cabel/faulty scart cabel/any external connection can create re booting otherwise it will damage the box.
Finally ring tm or send an email to info@technomate.com they might have solution or replacement if this box is faulty.

Hi Jony, when i reflashed this morning all I had connected was one lnb, power and a brand new HDMI cable. No usb, HDD or 2nd lnb but still had same issues. Ive packed it back in the box and dug out my old openbox s10 to get us through christmas. Will contact TM tomorrow if they are open