Hi,
My GF has bought me a Quad for Christmas.
When I'm flashing it do I need to flash any bootloader or just follow the tut for flashing the gigablue 800?
http://www.world-of-satellite.com/sh...08-12-from-WoS
Cheers
Hi,
My GF has bought me a Quad for Christmas.
When I'm flashing it do I need to flash any bootloader or just follow the tut for flashing the gigablue 800?
http://www.world-of-satellite.com/sh...08-12-from-WoS
Cheers
Just flash it, AFAIK you shouldn't need to do the bootloader thing.
BTW, nice GF you have
VU+ DUO² (Triple S2 tuners) VIX, 750gb
TM-Nano 2 Super, 320gb
GigaBlue HD 800 UE Plus VIX
TM-Single VIX IT'S ALIVE
Octagon SF8 VIX (751MHz bootloader)
MARA M9
Harmony 700
DGS108 GBLAN, DIY NAS (8TB) XPEnology
1.1m dish, 0.1db Quad LNB, GTSAT DM14MG motor
80cm dish, 2x 0.1db LNB + 1x Quad 0.2db LNB, Disqec 4/1.
Got mine yesterday. Trying to put vix on it. Extracted to the usb(formatted to fat32). Put it in switched on. The box just boots up into openmips.
The usb isn't an expensive one. But the box recognises it when I go through the menus. Does that not suggest it should work to flash?
I'll try look for a better USB tomorrow. Is that the most likely problem?
Use this tool to format your USB stick http://www.world-of-satellite.com/sh...SB-Format-Tool
Extract the image and copy the complete Gigablue folder to root of your USB stick. I would then connect usb stick to a rear port, power on, then when you get the message on the front LCD press OK behind front flap.
D I S C L A I M E R
My right to post information is protected under the rights for freedom act. In all instances, information discussed here on my posts are either hypothetical in nature, out of general curiosity, common knowledge, public knowledge, or role-play. Any use of the collective descriptions and shared knowledge from any of my posts are at the sole discretion of the reader. I am not responsible for what you do with it!
Please help keep OpenViX online, donate HERE.
Rules can be found HERE
Support our sponsor World-Of-Satellite HERE
GIGABLUE UHD QUAD 4K, VU+ DUO 4K SE, ZGEMMA H7S, VU+ UNO 4K SE
Triax 1.1m Powered by TM2600, Fixed 28.2 Zone 2 dish with GT-SAT Unicable
anfieldoreilly (25-12-12)
Yeah I had done that. The LCD is just dark when I turn my box on. And stays dark(off) even when up and running. The blue led lights up. That's it though.
I sorted the LCD. When I installed installed the HDD I hit of the cable that connects it to the board and knocked it out. Stupid mistake anyway its fixed now .
Still when I put the USB in I get nothing to ask me to flash. Just boots into openmips. I'm 100% sure I'm following the guide correctly. So can only hope its the cheap USB.
New USB worked