Hi all, please be gentle with me as i am new to this.I have set up my 202e and want to connect to my hub via an ethernet cable but dont know what settings i have to put in? I have had a little bit of a go at it but keeps telling me connection failed.
Thanks in advance
If you have connected the unit to your hub, the network should be seen by the unit, at a guess, ( I dont have this unit here ) you need to go to menu/setup...and look for the network button/tab
go into it, and id avaialable, use the wizard, if not, make sure DHCP is activated, restart the unit, and hope fully you will be connected
Units; VU+Ultimo/duo/DM800/7020HD/tm9100
1.2 channel master/quad feedhorn/36volt /vbox
1 fixed dish, and 1 motorized 1mtr dish
and a pile of redundant cards/cams
What are you doing when you get the message connection failed? Are you trying to use some of the online services? If so you need to upgrade to latest firmware. How to upgrade http://www.world-of-satellite.com/sh...upgrade-guides Latest firmware is v1.20B6 http://www.world-of-satellite.com/fo...-Ariva-202E-HD
D I S C L A I M E R
My right to post information is protected under the rights for freedom act. In all instances, information discussed here on my posts are either hypothetical in nature, out of general curiosity, common knowledge, public knowledge, or role-play. Any use of the collective descriptions and shared knowledge from any of my posts are at the sole discretion of the reader. I am not responsible for what you do with it!
Please help keep OpenViX online, donate HERE.
Rules can be found HERE
Support our sponsor World-Of-Satellite HERE
GIGABLUE UHD QUAD 4K, VU+ DUO 4K SE, ZGEMMA H7S, VU+ UNO 4K SE
Triax 1.1m Powered by TM2600, Fixed 28.2 Zone 2 dish with GT-SAT Unicable
Originally Posted by Sicilian
Sorted it out now, thanks for the help folks.
Posting Permissions
Reply With Quote
