VU+ DUO² (Triple S2 tuners) VIX, 750gb
TM-Nano 2 Super, 320gb
GigaBlue HD 800 UE Plus VIX
TM-Single VIX IT'S ALIVE
Octagon SF8 VIX (751MHz bootloader)
MARA M9
Harmony 700
DGS108 GBLAN, DIY NAS (8TB) XPEnology
1.1m dish, 0.1db Quad LNB, GTSAT DM14MG motor
80cm dish, 2x 0.1db LNB + 1x Quad 0.2db LNB, Disqec 4/1.
Hi,
Did you hear anything at all?
If ti was pure silence try again and use the optical cable as a connection from the STB to the AVR. My material with HD sound is only in iso and I cannot play it at all.
ciao
---
Sat:VU+ Ultimo4K/Solo4K/Duo2/2*Solo2/Ultimo
Remote: Harmony 200, 700, Link, Smart Control, Smart Companion, Elite, 2*Ultimate, Keyboard
Last edited by marty; 07-11-12 at 11:37.
VU+ DUO² (Triple S2 tuners) VIX, 750gb
TM-Nano 2 Super, 320gb
GigaBlue HD 800 UE Plus VIX
TM-Single VIX IT'S ALIVE
Octagon SF8 VIX (751MHz bootloader)
MARA M9
Harmony 700
DGS108 GBLAN, DIY NAS (8TB) XPEnology
1.1m dish, 0.1db Quad LNB, GTSAT DM14MG motor
80cm dish, 2x 0.1db LNB + 1x Quad 0.2db LNB, Disqec 4/1.
OK, I have a few mins so I had had another go.
I was using an M2TS stream from a BD on an external USB HDD.
HDMI connected.
The results
Optical conection gives standard DTS (non HD, not possible over optical anyway)
HDMI, with audio downmix on it gave stereo LPCM and with audio downmix off it gave standard DTS.
Last time I tested it, it did NOT give DTS over HDMI only LPCM so I suppose there must have been some change since I last tested it.
Again the audio menu shows DTS-HD.
It would be nice it it did output proper HD sound in the future
The same file will NOT play on a DUO it trys but can't manage it.
Last edited by marty; 07-11-12 at 11:37.
VU+ DUO² (Triple S2 tuners) VIX, 750gb
TM-Nano 2 Super, 320gb
GigaBlue HD 800 UE Plus VIX
TM-Single VIX IT'S ALIVE
Octagon SF8 VIX (751MHz bootloader)
MARA M9
Harmony 700
DGS108 GBLAN, DIY NAS (8TB) XPEnology
1.1m dish, 0.1db Quad LNB, GTSAT DM14MG motor
80cm dish, 2x 0.1db LNB + 1x Quad 0.2db LNB, Disqec 4/1.
bluepeter (07-11-12)
Thanks Marty/Rossi for running some test, as you've rightly pointed out, HD audio is not possible over optical (not enough bandwidth) as some of you are aware what we're really after is HDMI pass thru allowing the amp to process the signal, be it PCM, DD true HD, or DTS MA HD... optical will send the core track, for those that understand how blue rays are compiled sonically. Though this is not HD.
This is I believe going to be a real pain to get sorted, I don't believe it's either a Gigablue/Vu+ driver issue but a Broadcom problem.... hopefully when they release the microcode to be able to update the kernel the issue gets dealt with then.
Trail, you say that the Ultimo can stream blu rays from your NAS, does it also handle HD audio?
Regards
Peter.
Vu+Solo2
Vu+Duo motorised - 1.2mtr dishes - tho 1 fixed on 28.2 - the other 'the universe'
DB 800
DB 600
been playing with sat since the 8 button Amstrad
load of outdated junk sitting in the garage
The ultimo doesnt do hd audio either i try on every box i get.
It is one feature id really like to have without connecting up a htpc for hd audio..
Vu Ultimo4K, OpenViX 5.0, 8xdvb-c, 8xdvb-s2, 2xdvb-t2
Vu Solo4K, OpenViX 5.0, 8xdvb-s2
Dreambox DM900, OpenViX 5.0, 2xdvb-s2, 2xdvb-c/t2
Terrestrial, Cable, Fixed 28.2e + Unicable2 LNB
Thanks Rossi for letting me know, shucks that's a pita, the Ultimo is running the most up to date kernel
on Linux boxes isn't it? Over to Broadcom then.
Over the last several years I played with quite a few media streamers (popcorn, dune, netgear etc) the problems they have suffered with the Mega amount of file formats, frames per second, handling of audio and the list goes on is going to prove a real nightmare for satellite rx manufacturers who are new to the game of media streaming.
This is what makes me a bit wary of the claims Vu+ are making for the Duo2 , it's not going to prove to be a particularly good piece of kit as a streamer if it's unable to deal properly with FPS and HD audio.
Regards
Peter.
PS, thanks guys for pursuing this, I'm inline to upgrade my duo and I'm not sure whether to keep things simple and get the GB quad or hang on and get the Duo2 which could/will open up a whole new can of worms.
Vu+Solo2
Vu+Duo motorised - 1.2mtr dishes - tho 1 fixed on 28.2 - the other 'the universe'
DB 800
DB 600
been playing with sat since the 8 button Amstrad
load of outdated junk sitting in the garage
bluepeter (07-11-12)
i think xtrend are running 3.6.0 kernel atm
Vu Ultimo4K, OpenViX 5.0, 8xdvb-c, 8xdvb-s2, 2xdvb-t2
Vu Solo4K, OpenViX 5.0, 8xdvb-s2
Dreambox DM900, OpenViX 5.0, 2xdvb-s2, 2xdvb-c/t2
Terrestrial, Cable, Fixed 28.2e + Unicable2 LNB
bluepeter (07-11-12)
As far as I am aware Vu are working on the 3.6.6 kernel for their new models as are Gigablue for the quad, but they need the relevant microcode from Broadcom to progress further. As Rossi pointed out the xtrend receivers are on 3.6.x and if memory serves the Tm-twin is also on the 3.5 or 3.6 kernel.
Sent from my iPad using Tapatalk HD
My posts contain my own personal thoughts and opinions, they do not represent those of any organisation or group but my own.
If you don't like what I post, Don't read it.
SIMPLES.
bluepeter (07-11-12)
In the VU-GIT you can see that Solo2 is on 3.3
Help asked via PM will be ignored.
The forum is there for help and all will benefit from your questions.
NO CARD SHARING TALK WILL BE TOLERATED, LAN OR WAN, IN OPEN FORUM OR PM !
English is not my native tongue.
I apologise for all my grammar, spelling and idiom errors.
Thanks guys for the info, so anyone with an Xtrend>HDMI amp>HD file to see if pass thru is achievable? Their are plenty of downloadable sample files available on the web for testing purposes.
Regards
Peter
Vu+Solo2
Vu+Duo motorised - 1.2mtr dishes - tho 1 fixed on 28.2 - the other 'the universe'
DB 800
DB 600
been playing with sat since the 8 button Amstrad
load of outdated junk sitting in the garage
just stumbled across the duo2 accidentally online as I was trying to check prices for the ultimo
i think ill wait for it
hopefully its out soon and VIX supports it
According to vu+ facebook fan page the vu+ user responded with this info just this week
And regarding solo2Vu+ Thank you for your interests in Vu+ products. Duo 2 is in the final stage of development. Regarding the release date and price, it will be a few months away until the info is officially published. Thank you for your patience in advance.
Wednesday at 5:40am · Edited · Like
So it does appear that there won't be a duo2 around until early next year. Maybe a solo2 can be hoped for before christmas.Vu+ Thank you for your interests in Vu+ products. Solo2 is expected to be released within this year. Regarding price, unfortunately, we can not give exact price, yet it will reflect the performance to the best. For more updates, please check the official website! Thank you.
Wednesday at 4:12am · Edited · Like
i suppose with gigablue quad not bringing sat tuners until Q1 next year at earliest and still with many issues linked to drivers, it might be worth waiting as agonising as it is. Hopefully the vu developers can shed some light on those twin dual tuner in a single slot thing they said would be here by Q3 this year.
Last edited by 75mak; 09-11-12 at 08:45.
And you think VU+ DUO2/SOLO2 wont have any driver issues? VU+ DUO for example has driver issues even after 2+ years.