you do have the coax cable connected dont you??
to test..go menu/setup/service searching///select sat finder...it should be set to 28 east...see if you have a signal
Units; VU+Ultimo/duo/DM800/7020HD/tm9100
1.2 channel master/quad feedhorn/36volt /vbox
1 fixed dish, and 1 motorized 1mtr dish
and a pile of redundant cards/cams
the cable from the dish...please do as i have asked...see if you have a signal....
Units; VU+Ultimo/duo/DM800/7020HD/tm9100
1.2 channel master/quad feedhorn/36volt /vbox
1 fixed dish, and 1 motorized 1mtr dish
and a pile of redundant cards/cams
well there is a problem then with either the unit, but more likely with the dish or lnb, or the coax cable...check that there is no shorting from the outer core to the centre core of the cable
also not sure if loop throu is available on the unit...but if the are 2 possible connections, make sure you are connected to the correct connection ( in )
Units; VU+Ultimo/duo/DM800/7020HD/tm9100
1.2 channel master/quad feedhorn/36volt /vbox
1 fixed dish, and 1 motorized 1mtr dish
and a pile of redundant cards/cams
well you need to test the dish cables on another unit..if you get signal/piccy, then there is some thing wrong with the unit
Units; VU+Ultimo/duo/DM800/7020HD/tm9100
1.2 channel master/quad feedhorn/36volt /vbox
1 fixed dish, and 1 motorized 1mtr dish
and a pile of redundant cards/cams
Ste2011 (22-09-12)
one other thing to try is
go menu/setup/service search..select single sat..not transponder,...and do a full scan..and see if the unit pickes up any listings
Units; VU+Ultimo/duo/DM800/7020HD/tm9100
1.2 channel master/quad feedhorn/36volt /vbox
1 fixed dish, and 1 motorized 1mtr dish
and a pile of redundant cards/cams
Aren't Catseyes multi sat? not sure as I don't use them.
Best to use Mr.Mister or STGFlipFlop if you only need SKY UK settings.
yes...but uk is top of list with catseye...he is using black hole.and of very limited knowledge with the unit..so for now..it would be a big step to ftp over listings
Units; VU+Ultimo/duo/DM800/7020HD/tm9100
1.2 channel master/quad feedhorn/36volt /vbox
1 fixed dish, and 1 motorized 1mtr dish
and a pile of redundant cards/cams
judge (22-09-12)
whilst its scanning...you should see various channels being listed..ie ch 4 and so on...is this happening?
Units; VU+Ultimo/duo/DM800/7020HD/tm9100
1.2 channel master/quad feedhorn/36volt /vbox
1 fixed dish, and 1 motorized 1mtr dish
and a pile of redundant cards/cams