Vu+ Uno not finding any channels

[Ste2011]

The most basic setup

Non motorised dish

Just want to point at the Sky satellite and get the box to find some channels.

[Ste2011]

Have an existing sky dish that is pointed correctly

[Larry-G]

what exact image are you using ?.

[Ste2011]

BlackHole 1.7.7

[basilyoung]

have you set up the tuner?

menu/setup/tuner config

if it says not configed, hi lite it, and select simple
then drop down to sats..and change it to 28 east
press ok, and exit to a normal screen
then press ( i think ) green button, then addons ( yellow button ) addons manager/enigma2 settings
within this option will be a list of channel settings...select a 28 east setting or a motorized setting...and follow instructions

YOUR UNIT DOES NEED TO BE INTERNET CONNECTED

[Larry-G]

i'm not overly familiar with the BH images, all i can really suggest at this point is to make sure you have the very latest FPGA loaded on the receiver.

[Ste2011]

In that case I've gone to plugins and chosen FPGA Upgrade, pressed green for upgrade and been asked do I want to upgrade, when I choose ok I'm presented with a set of folders with the top one being <List of Storage Devices>

I don't know which folder to choose.

[Ste2011]

It seems to be updating now

[Ste2011]

Thanks, just running a FPGA Upgrade and will try your suggestion once that has completed.

[Ste2011]

have you set up the tuner?

menu/setup/tuner config

if it says not configed, hi lite it, and select simple
then drop down to sats..and change it to 28 east
press ok, and exit to a normal screen
then press ( i think ) green button, then addons ( yellow button ) addons manager/enigma2 settings
within this option will be a list of channel settings...select a 28 east setting or a motorized setting...and follow instructions

YOUR UNIT DOES NEED TO BE INTERNET CONNECTED

Thanks, internet connection is working fine.

There is an option under settings that has a list beginning with Catseye motor (Black Hole E2), would that one do me?

[Ste2011]

Thanks, internet connection is working fine.

There is an option under settings that has a list beginning with Catseye motor (Black Hole E2), would that one do me?

That didn't have 28.2 E so I chose one that did, just rebooting now.

[basilyoung]

yes as the uk listings are top of the list

[basilyoung]

once done...restart the unit

once fully started, press your down button..then blue button...select a free to air channel ( bbc or what ever ) press ok. and you should be sorted

[Ste2011]

yes as the uk listings are top of the list

Yes to Catseyes?
If so what do I do after it has installed and I've rebooted the box?

Thanks for your help.

[basilyoung]

read my last post...press the down button on your remote, then blue button for bouquets...all should be obvious from there