[Solved] ferguson 202e died on me

[blueboyuk]

New to this box.Flushed with patch added line everything ok! set up channel list seemed to be ok.Whent out for a couple of hours returned home turned on box! ON light come on! nothing all that was on front display (R S H) or (R S K) only had the box 1 day any ideas what this may be software or hardware?
Any help will be appreciated

[aasheish_mody]

It can only be fixed through a null modem cable. Do you have one ?

[nasssat]

have same problem ash i have null cable but i do not no how to bring up ariva loder can anyone help

[blueboyuk]

Thanks for your quick reply. No i dont but have sent unit back anyway! Will enquire with WOS just wanted to know what (R S H) or (R S K) meant??
Thanks for your time blueboy

[Sicilian]

Sounds like something went wrong when you patched the unit, easily recovered with a USB TO RS232 adapter and null modem cable.

[blueboyuk]

Thanks for your reply.Will look into this when the box comes back!

[mirkop75]

I also have the decoder with the dispay with rsh, when I go to load the file A202E_20120807_V1.19B1.abs I get the message "please reset target" and hangs what should I do?

[Sicilian]

I also have the decoder with the dispay with rsh, when I go to load the file A202E_20120807_V1.19B1.abs I get the message "please reset target" and hangs what should I do?

Follow the guide, at that point power on the receiver, if already on, simply power off then on again

[mirkop75]

Follow the guide, at that point power on the receiver, if already on, simply power off then on again

But the guide says to turn on the receiver after loading the firmware?

[Sicilian]

But the guide says to turn on the receiver after loading the firmware?

Read what I posted, I said 'at that point power on the receiver' if already on, power off, then on again.

If not connecting check your RS232 connection is set correctly on your PC.

[mirkop75]

I solved thanks for your help

[blueboyuk]

sicilian seems the man in the know! if you dont have a USB TO RS232 adapter and null modem cable all i can suggest is phone or email your supplier
Best of luck
blueboy.

[blueboyuk]

check your patch your patch A202E_20120807_V1.19B1.abs the date on the newest patch A202E_20120808_V1.19B1.abs same V number? get patch from download section and give it another try ?
Best of luck
blueboy

[hussy786]

same with me any idea how to get away with reset target

[peppereg]

hi,
my ferguson 102e is completely turned off, it doesn't show any message on display.
can you think that recovery with rs232 can resolve it?
thanks.