I do see a dvb txt file...but its empty
I do see a dvb txt file...but its empty
Units; VU+Ultimo/duo/DM800/7020HD/tm9100
1.2 channel master/quad feedhorn/36volt /vbox
1 fixed dish, and 1 motorized 1mtr dish
and a pile of redundant cards/cams
none of the three commands you posted have been correct so far, try again with correct command, copy and paste?
root@dm7020hd:~#
root@dm7020hd:~# dvbsnoop -nph -n 1 0x11 >/tmp/dvb.txt
sorry about this...going blind,....but have just copy + pasted the above
Units; VU+Ultimo/duo/DM800/7020HD/tm9100
1.2 channel master/quad feedhorn/36volt /vbox
1 fixed dish, and 1 motorized 1mtr dish
and a pile of redundant cards/cams
just tried to run auto boquets and get dvbsnoop timed out message...no change to the dvb.txt file....is there a dvbsnoop version that i should be using..got three on my comp
Units; VU+Ultimo/duo/DM800/7020HD/tm9100
1.2 channel master/quad feedhorn/36volt /vbox
1 fixed dish, and 1 motorized 1mtr dish
and a pile of redundant cards/cams
Baz try the file Mcquaim uploaded to my TM800 thread as per Lazair its supposed to be box independnt and may well work for you mate. Worked a treat on the 800
Support The Sponsor - Buy from the best HERE
Please abide by the rules - have a read HERE
VIX manual & guides >>HERE
Download images from >> HERE
New Box Setup Guide >>HERE
D I S C L A I M E R
My right to post information is protected under the rights for freedom act. In all instances, information discussed here on my posts are either hypothetical in nature, out of general curiosity, common knowledge, public knowledge, or role-play. Any use of the collective descriptions and shared knowledge from any of my posts are at the sole discretion of the reader. I am not responsible for what you do with it!
PM HELP WILL BE IGNORED PLEASE POST HERE IN FORUM AS IT BENEFITS EVERYONE
Follow us on Twitter
NO CARD SHARING TALK WILL BE TOLERATED, LAN OR WAN! IN OPEN FORUM OR PM
IF THE POSTS HELP PLEASE CLICK THANKS OR ADD TO REP ?
thanks Stan/LraiZer
will try it...think i am going stupid
Units; VU+Ultimo/duo/DM800/7020HD/tm9100
1.2 channel master/quad feedhorn/36volt /vbox
1 fixed dish, and 1 motorized 1mtr dish
and a pile of redundant cards/cams
also make sure you zapped to and are viewing an active channel on 28.2E before running the command?
i assume this dvbsnoop_0.0+cvs20081001-r0_mipsel.ipk package is the one for your box?
HTML Code:http://dreamboxupdate.com/opendreambox/1.6/dm7020hd/experimental/
Last edited by Stanman; 25-08-12 at 23:28. Reason: coded live link
no longer sure to be honest, i will ftp it to the unit now
but yes..watching a 28 east channel
Units; VU+Ultimo/duo/DM800/7020HD/tm9100
1.2 channel master/quad feedhorn/36volt /vbox
1 fixed dish, and 1 motorized 1mtr dish
and a pile of redundant cards/cams
ok..reflashed with nemisis, scanned 28 east, added the autobouquet ipk, installed ok...but although watching sly news after a scan,..it does not work
added the dvbsnoop, rebooted, tried again, and same result
I think it must be an image issue
Units; VU+Ultimo/duo/DM800/7020HD/tm9100
1.2 channel master/quad feedhorn/36volt /vbox
1 fixed dish, and 1 motorized 1mtr dish
and a pile of redundant cards/cams
yes, I plan to, but does anyone know what image was used on the 800?? and please, hope its not gemini
I plan to also test on my ET9000, just to be sure its not me ( and if it is, I will not be owning up )
Units; VU+Ultimo/duo/DM800/7020HD/tm9100
1.2 channel master/quad feedhorn/36volt /vbox
1 fixed dish, and 1 motorized 1mtr dish
and a pile of redundant cards/cams
The ET should go fine.
I've installed it so far on a TM800, ET9K, ET5K and Ultimo and all have been fine.
Support The Sponsor - Buy from the best HERE
Please abide by the rules - have a read HERE
VIX manual & guides >>HERE
Download images from >> HERE
New Box Setup Guide >>HERE
D I S C L A I M E R
My right to post information is protected under the rights for freedom act. In all instances, information discussed here on my posts are either hypothetical in nature, out of general curiosity, common knowledge, public knowledge, or role-play. Any use of the collective descriptions and shared knowledge from any of my posts are at the sole discretion of the reader. I am not responsible for what you do with it!
PM HELP WILL BE IGNORED PLEASE POST HERE IN FORUM AS IT BENEFITS EVERYONE
Follow us on Twitter
NO CARD SHARING TALK WILL BE TOLERATED, LAN OR WAN! IN OPEN FORUM OR PM
IF THE POSTS HELP PLEASE CLICK THANKS OR ADD TO REP ?
ok, I have reflashed the unit with the dreamelite image
scanned 28 east, and loaded catseye listings
I then added autobouquets, and rebooted the unit, and it now shows in "plugins"...went to a bbc channel, and activated autobouquets, and got a time out message
message reads
reading bouquet association table please wait...killed
no data available, dvbsnoop timed out!
please zap to an active 28.2e channel
execution finished
i then added dvbsnoop, rebooted ...then on a bbc channel, restarted autobouquets, and got the same message
Units; VU+Ultimo/duo/DM800/7020HD/tm9100
1.2 channel master/quad feedhorn/36volt /vbox
1 fixed dish, and 1 motorized 1mtr dish
and a pile of redundant cards/cams
Bas, what happens if you do it on a sky encrypted channel?
Sent from my iPad using Tapatalk HD
same thing....just loaded the merlin image, going to get this sorted one way or another
Units; VU+Ultimo/duo/DM800/7020HD/tm9100
1.2 channel master/quad feedhorn/36volt /vbox
1 fixed dish, and 1 motorized 1mtr dish
and a pile of redundant cards/cams