How To Upgrade Image On Venton Unibox Via USB Memory Stick

[bassethound]

Preparation

Format the USB drive to the filesystem FAT 32.

Create the folder;

Download the image file, see the following 3 files;



Copy the 3 files into the Venton-hd1 folder.

Copy the folder Venton-hd1 to a USB drive.

Upgrade

Turn off the power.

Insert the USB drive into the USB port on the rear of the device.

Turn on the power.

The upgrade process starts automatically. The upgrade process can be see on the VFD display.

If the upgrade process is successful, you can see on the VFD display the message; ` Complete...`.

Now you can disconnect the USB drive from the device and restart the device.

thanks to op

[yong]

help!!!!!!!!!!!!!!!!!!!!!

[Larry-G]

We need a little more than that. Exactly what kind of help do you need ?.

Sent from my GT-I9300 using Tapatalk 2

[jorib]

and for dreambox or VU image in the venton, its the same steps?

[Sicilian]

and for dreambox or VU image in the venton, its the same steps?

No idea how you multi-boot the Venton.

[jorib]

THANKS
i ll try egami multiboot

Jorib

[bmwm3343ps]

I was trying to flash my box with the above directions but with no result. I finally found out that the folder's name should be unibox-hdx and no unibox-hd1!

[bmwm3343ps]

I was trying to flash my box with the above directions but with no result. I finally found out that the folder's name should be unibox-hdx and no unibox-hd1!

MISTAKE : The folder's name must be venton-hdx. Sorry all of you....

[Cus2k]

First update the bootloader
after updating with image, ok for Venton-hdx

Do not use the front USB port

[bmwm3343ps]

Has anyone found a recent openaaf 2.0 venton hdx image? The most recent one that I could find is 17-01-2013.