D I S C L A I M E R
My right to post information is protected under the rights for freedom act. In all instances, information discussed here on my posts are either hypothetical in nature, out of general curiosity, common knowledge, public knowledge, or role-play. Any use of the collective descriptions and shared knowledge from any of my posts are at the sole discretion of the reader. I am not responsible for what you do with it!
Please help keep OpenViX online, donate HERE.
Rules can be found HERE
Support our sponsor World-Of-Satellite HERE
GIGABLUE UHD QUAD 4K, VU+ DUO 4K SE, ZGEMMA H7S, VU+ UNO 4K SE
Triax 1.1m Powered by TM2600, Fixed 28.2 Zone 2 dish with GT-SAT Unicable
Yes 100%
Did manual scan as you said.
Just did it all again with another usb
Same thing.
Go through the wizard etc.
Select NO to any scans
Select Scan later
Select NO to installing default channel list
Once the wizard completes it automatically goes into a favorite folder with no channels in it.
I have tried manual scan and sending a boquet,
No luck to either.
Contact where you purchased for them to checkout the unit.
Are you 100% sure your feed, signal and LNB are correct? Can you test with another receiver? Are you using a direct feed from an LNB?
D I S C L A I M E R
My right to post information is protected under the rights for freedom act. In all instances, information discussed here on my posts are either hypothetical in nature, out of general curiosity, common knowledge, public knowledge, or role-play. Any use of the collective descriptions and shared knowledge from any of my posts are at the sole discretion of the reader. I am not responsible for what you do with it!
Please help keep OpenViX online, donate HERE.
Rules can be found HERE
Support our sponsor World-Of-Satellite HERE
GIGABLUE UHD QUAD 4K, VU+ DUO 4K SE, ZGEMMA H7S, VU+ UNO 4K SE
Triax 1.1m Powered by TM2600, Fixed 28.2 Zone 2 dish with GT-SAT Unicable
Ok
Only got it yesterday, Was from WOS
Yes have my VU+ running fine with it
Its a quad lnb, Runs direct from lnb to box
I'll be honest, I'd be very surprised if this turns out to be a faulty unit, but suppose there is a small chance. http://www.world-of-satellite.co.uk/.../return/insert
D I S C L A I M E R
My right to post information is protected under the rights for freedom act. In all instances, information discussed here on my posts are either hypothetical in nature, out of general curiosity, common knowledge, public knowledge, or role-play. Any use of the collective descriptions and shared knowledge from any of my posts are at the sole discretion of the reader. I am not responsible for what you do with it!
Please help keep OpenViX online, donate HERE.
Rules can be found HERE
Support our sponsor World-Of-Satellite HERE
GIGABLUE UHD QUAD 4K, VU+ DUO 4K SE, ZGEMMA H7S, VU+ UNO 4K SE
Triax 1.1m Powered by TM2600, Fixed 28.2 Zone 2 dish with GT-SAT Unicable
I remember when these first came out people having this kind of problem, only finding half the channels, and if I remember correctly it was some thing to do with diseq. Even though you aren't using it you have to activate it, I could be wrong though.
Sent using sorcery and the magic interwebs
SalteeDog (08-07-12)
I've the exact same problem - 490 services. Haven't tried the reflash bootloader solution suggested here yet though - will let you know how I get on. Previous to reading thread this morning I assumed I had a screwed up satellites.xml or something.
Follow instructions I posted with the Team Red image, this is the only cure. I've replicated dozens of times and cured it this way.
D I S C L A I M E R
My right to post information is protected under the rights for freedom act. In all instances, information discussed here on my posts are either hypothetical in nature, out of general curiosity, common knowledge, public knowledge, or role-play. Any use of the collective descriptions and shared knowledge from any of my posts are at the sole discretion of the reader. I am not responsible for what you do with it!
Please help keep OpenViX online, donate HERE.
Rules can be found HERE
Support our sponsor World-Of-Satellite HERE
GIGABLUE UHD QUAD 4K, VU+ DUO 4K SE, ZGEMMA H7S, VU+ UNO 4K SE
Triax 1.1m Powered by TM2600, Fixed 28.2 Zone 2 dish with GT-SAT Unicable
SalteeDog (08-07-12)
To test the DiSEqC theory posted above, I ran the manual scan again - this time with 'Send DiSEqC' set to 'Yes' for that tuner. Returned 983 services this time. Not sure why this makes a difference as I've no DiSEqC switch on my dish (pointed at 28.2 only)
** Edit...with 983 I'm probably not missing anything now - Kingofsat is showing 940 as total number of services for 28.2.e.
With that I'll probably leave it as is for now.
Last edited by SalteeDog; 08-07-12 at 14:50.
I can confirm that setting the tuner to send diseqc to yes, does indeed fix scanning
D I S C L A I M E R
My right to post information is protected under the rights for freedom act. In all instances, information discussed here on my posts are either hypothetical in nature, out of general curiosity, common knowledge, public knowledge, or role-play. Any use of the collective descriptions and shared knowledge from any of my posts are at the sole discretion of the reader. I am not responsible for what you do with it!
Please help keep OpenViX online, donate HERE.
Rules can be found HERE
Support our sponsor World-Of-Satellite HERE
GIGABLUE UHD QUAD 4K, VU+ DUO 4K SE, ZGEMMA H7S, VU+ UNO 4K SE
Triax 1.1m Powered by TM2600, Fixed 28.2 Zone 2 dish with GT-SAT Unicable
Hi
that worked thanks.
Iv now tried the latest image as the problem is solved.
But having the same issue.
Using openaaf when i install it, the wizard doesnt give you the option of not installing default channel list.
I think this is causing me problems. Iv uploaded my a boquet and get some channels. But not all.
Just set Send DisEQC to YES in tuner configuration.
D I S C L A I M E R
My right to post information is protected under the rights for freedom act. In all instances, information discussed here on my posts are either hypothetical in nature, out of general curiosity, common knowledge, public knowledge, or role-play. Any use of the collective descriptions and shared knowledge from any of my posts are at the sole discretion of the reader. I am not responsible for what you do with it!
Please help keep OpenViX online, donate HERE.
Rules can be found HERE
Support our sponsor World-Of-Satellite HERE
GIGABLUE UHD QUAD 4K, VU+ DUO 4K SE, ZGEMMA H7S, VU+ UNO 4K SE
Triax 1.1m Powered by TM2600, Fixed 28.2 Zone 2 dish with GT-SAT Unicable
andel (26-07-12)
yep, worked for me too
worked for me 2 after a hour of pulling my air out
All PM,s asking about c/s on cable will be ignored and reported to forum staff!
Sicilian (22-08-12)